KAIR TRAKMASTER APARTMENT DUCTED HEAT RECOVERY VENTILATOR
- Meets Building Regulations requirements
- Up to 65% Heat Recovery
- Easy to install (no external access required - 102mm core drill)
- Whisper quiet Continuous running trickle ventilation
- Humidity sensor (preset or adjustable)
- Low running costs
- Tamperproof screws (See below for bit required for installation)
- The spigots on the standard Kair TrakMaster unit are suitible for use with Kair 110mm x 54mm Rectangular Ducting.
- Kair 100mm Round Ducting can be used with the use of a SYSTEM 100 SHORT MALE ROUND TO RECTANGULAR ADAPTER
- Balanced or positive airflow
- Energy savings
- Security ventilationTM (no need to open windows)
- Health benefit - produces dramatic improvements of indoor air quality
Continuous Running, Energy Efficient, Heat Recovery Ventilator For Flats, Bungalows, Kitchens and Bathrooms
Unlike conventional extractor fans which suck out and waste expensively produced heat, KairTM Trakmaster KHRVF100 Heat Recovery Ventilators recover up to 65% of exhaust heat, even when operating on boost mode. The world is becoming increasingly aware of the enormous cost of energy production, and this, plus the use of fossil fuels to generate power, is a momentous environmental issue. Extractor fans potentially waste over a million kilowatts of energy every year. This is comparable to the total output of two large power stations. Replacing conventional extractor fans with heat recovery systems could save at least half of that energy loss.
"I am very grateful that all the fungus and black on the walls in each room has completely disappeared. I feel very much healthier" - Councillor Shaw, Brent
How It Works:
Kair™ Trakmaster KHRVF100 Heat Recovery Room Ventilators provide a continuous air change, replacing stale moisture-laden unhealthy air with filtered, fresh, warmed air from outside the dwelling. The continuous controlling of Relative Humidity levels ensures that conditions will not exist in which condensation or mould growth problems can develop and thrive.
A variety of manual or automatic controls are available including: a) Two speed switch for manual override. b) Automatic switching two speed humidistat c) Independent switching for input or extract motors to vary pressures for Summer / Winter settings – internal bathrooms / kitchens variable life styles – multiple occupancy.
Controls for these units can be found in our Ventilation Ancillaries section
The Kair Trakmaster is designed for easy installation by use of 102mm core drilled holes. Installation is undertaken entirely within a building with no requirement for external access, thus reducing installation costs on high-rise applications. The Kair™ Trakmaster is factory set to provide a positive pressure facility to combat the ingress of radon gas and increase heat exchange efficiency. Full installation instructions are provided with the unit.
The spigots on the standard Kair TrakMaster unit are suitible for use with 110mm x 54mm Rectangular Ducting. Kair 100mm Round Ducting can be used with the use of a SYSTEM 100 SHORT MALE ROUND TO RECTANGULAR ADAPTER
A full range of our ducting for this unit can be found in our Plastic Ducting or Flexible Hose sections.
Please note that this unit is protected by system zero security screws. Either a tamperproof bit or tamperproof driver is required for installation.
Filters should be removed at 6 to 12 month intervals subject to site conditions and replaced or cleaned with a domestic vacuum cleaner or washed if exceptionally dirty. The motors are guaranteed for 5 years and are fitted with ‘Sealed for Life’ bearings, which do not require maintenance or lubrication. Kair™ Trakmaster KHRVF100 Ventilator can be serviced and maintained from inside the building with no requirement for external access.
Filters for these units can be found in our Filter section - There is a choice of Standard or EU7 grade Filters
Installation can be carried out by a suitably qualified craftsman and connected to electrical supply by an electrician in accordance with IEE Regulations.
|Up to 65%
Typical Performance figures - Assuming an average of 80% trickle and 20% boost speed. Test with outside air temperature at 7°C and inside room temperature at 23°C