Vent Axia 1.5A Speed Controller (W300310)
-
DETAILS
VENT AXIA 1.5A SPEED CONTROLLER (W300310)
Product Details:
- For use with ACM Range (Non-Timer Models Only)
- On/Off neon indicator.
- Infinitely variable speed control.
- Adjustable minimum speed setting and optional sensor mode.
- The controller is radio-suppressed to BS800
- Rated at 1.5 amps.
- Single Phase.
- Not to be used in conjunction with timer models or modules.
86 x 156 x 53mm (H x W x D). For flush-fitting a metal wall box accessory is available.
Hole for wall box:80x150x150mm (HxWxD)
Stock Ref: W300310
Installation Tips:
- THIS APPLIANCE MUST BE EARTHED
- Ensure that the mains supply is isolated before proceeding with the wiring.
- The controller may be sited in any convenient position that is unaffected by direct heat sources such as radiators, boilers etc.
- Do not site the controller where it may be subject to water spray, condensation, damp or wet conditions.
- Ensure that the controller is installed in a ventilated area.
- Ensure that the enclosure is securely mounted using appropriate fixing screws or bolts.
- If the enclosure is mounted on a metal surface or partition, ENSURE THAT THE SURFACE IS EARTHED.
- The control unit has been factory set to Vent-Axia's recommended minimum speed.
- A minimum speed adjuster is located on the front of the controller and is exposed when the bottom slide bar is moved fully to the left.
-
FEATURES
Features
- Vent Axia 1.5A Single Phase Variable Speed Controller
- Suitable for use with the Vent Axia ACM Range (Not Timer Models)
- Adjustable minimum speed setting and optional sensor mode.
- Features an activation slider with neon light indicator
- Radio suppressed to BS EN 55014
-
TECHNICAL
Technical Specifications
Product Category Controllers and Sensors Product Type Controller Product Group Fan Ancillaries Length (mm) 95 Width (mm) 71 Height (mm) 165 Weight (Kg) 0.417 Packaged Weight (Kg) 0.417 Packaged Length (mm) 95 Packaged Width (mm) 71 Packaged Height (mm) 165 Manufacturer Product Code 300310 Quick Search: QS3673 -
REVIEWS
-
Q & A
Product Questions
Questions and Answers, do you need more information about this product?
Ask a QuestionYour question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
#1Grouping fans to this controllerCan 3 Standard 12 inch wall fans be controlled from 1 controller and another 2 from another controller?
Question by Bill Robertson, 16-10-2015Hello Bill,
I think the controller you are looking for is the Ecotronic 400 controller.
The Ecotronic 400 controller can be used to control a groups of units of any one size up to a total of 400 watts. Do not mix T-Series with Standard Range ventilating units on one controller.
Please do not hesitate to contact us if you have any further questions.
With kind regards,
MichaelReplied by i-sells, 19-10-2015#2ACM200 + controller QS3673i am looking to pair this controller with the 200mm ACM200 fan. - Is it a wireless connection and or is additional wiring required
Question by David Capps, 07-02-2017Hello David,
Thank you for your question. I have updated our product details page for this product to include the Fitting and Wiring Instructions. These can be downloaded from the product details page, or from this link - Vent Axia Speed Controller Fitting Instructions.
The controller is designed to be wired to the fan as per the attached included wiring diagram.
Please note that this controller cna only be used with 'Standard' (Non-Timer) ACM Models.
Kind regards,
MichaelReplied by i-sells, 07-02-2017#3controllercan this controller operate two motors at the same time
Question by Keith, 04-04-2017Hello Keith
If you are asking whether it is possible the answer is probably.However, if you told the manufacturer that is what you were going to do they would probably say that this would invalidate your guarantee on the fans and the controller.Replied by i-sells, 05-04-2017 -
DELIVERY
Delivery: You'll receive in: Cost Min Order Free Delivery 3 to 5 Days FREE £100 Standard 2 to 4 Days £4.99 - Express Courier Next day+ £9.95 Any View Full Delivery Info
FREE Delivery for orders over £100 inc VAT.
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.