<< Close Menu
Close Menu >>
Top » Plastic Ducting

Semi-Rigid Aluminium Flexible Ducting - 3M - 150mm

Model: GALALI-150
Search: QS464
  • Semi-Rigid Aluminium Flexible Ducting - 3M  - 150mm
  • Semi-Rigid Aluminium Flexible Ducting - 3M  - 150mm
  • Semi-Rigid Aluminium Flexible Ducting - 3M  - 150mm
  • Semi-Rigid Aluminium Flexible Ducting - 3M  - 150mm
  • Semi-Rigid Aluminium Flexible Ducting - 3M  - 150mm
  • Semi-Rigid Aluminium Flexible Ducting - 3M  - 150mm
  • Semi-Rigid Aluminium Flexible Ducting - 3M  - 150mm
Availability: In Stock
List Price: £72.65
Only: £42.61 Inc VAT
  • DETAILS

    3M-150MM SEMI-RIGID FLEXIBLE DUCTING HOSE

    Product Details:

    • Suitable for high, medium and low-pressure applications.
    • Fire resistant – tested to and complies with BS476.
    • Complies with the requirements of DW144.
    • Duct construction provides low friction loss.
    • Insulated and Acoustic ducting also available.
    • Bendable ducting constructed from pure aluminium.

     

    Whilst compressed diameter size is larger than shown on listing, once fully extended diameter will shrink to listed size. 

  • FEATURES

    Features

    • Our range of commerical semi-rigid hoses are flexible an can be bent into shape by hand, and are perfect for runs that require a firm and yet flexible hose.
    • Our semi-rigid duct naturally retains its corrugation form and is resistant to sagging when extended.
    • Can be compressed, extended or formed into bends or offsets with no reduction in area.
    • Maximum bend radius of : 1/2D
    • Suitable for applications with a maximum air velocity of 30m/s and 2500 Pa working pressure
  • TECHNICAL

    Technical Specifications

    Product Category Flexible Hoses
    Round System (mm) 150
    Product Type Semi-rigid Aluminium Flexible Hose
    Product Group Flexible Ducting
    Length (mm) 3000
    Width (mm) 152
    Height (mm) 167
    Diameter (mm) 150
    Colour Silver
    Material Aluminium
    Weight (Kg) 1.1
    Packaged Weight (Kg) 1.15
    Packaged Length (mm) 760
    Packaged Width (mm) 162
    Packaged Height (mm) 167
    Temp Max (°C) 250
    Temp Min (°C) -30
    Economy Delivery Not Eligible
    Barcode 5055774700705
    Manufacturer Product Code 892426
    Quick Search: QS464
  • REVIEWS
      Rated 5/5 based on 4 customer reviews
      Add Your Review
    1. Peter Barnes
      5 / 5 stars
      Date Added: Saturday 10 December, 2016
      Did the job OK.
    2. Brian Dancer
      5 / 5 stars
      Date Added: Saturday 08 October, 2016
      spot on for the job
    3. Andy Hill
      5 / 5 stars
      Date Added: Friday 29 July, 2016
      Excellent at fitting into awkward spaces. Very easy to cut to the desired lenght. Good for making up you own range of bends etc.
    4. Brendan Gordon
      5 / 5 stars
      Date Added: Thursday 12 May, 2016
      Excellent, took all the hard work out of proceeding from the main steel 150mm dust vent through the 150mm t piece, and achieving a weirded angle, to pick up the 150 to 100mm tapered vertical converter. It simply makes things easier, and though not exactly cheap, the time saving is worth every penny.
  • Q & A

    Product Questions

    Questions and Answers, do you need more information about this product?

    Ask a Question

    Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.

    #1
    Duct resistance

    Can you please advise what the Pa/metre figure is for the 150mm and 125mm semi rigid ducting.

    Question by Graham Bewsher, 16-07-2015

    Hello Graham,

    The Static Pressure Drop will depend on the temperature. Please see the last page of the datasheet which can be downloaded from here which contains a table showing the different values: http://www.i-sells.co.uk/fdm_download_file.php?fileid

    The maximum working pressure of the semi-rigid is 2000 Pa.

    Kind regards,

    Michael

    Replied by i-sells, 17-07-2015
    #2
    Cooker hood extract ducting in existing chimney

    Is this product suitable for cooker extract 5m vertical in existing chimney? How do I join 3m lengths, what clip to secure at top only?

    Question by davidgatehouse1@mac.com, 18-11-2015

    Hello David,

    The product is suitable for use in ventilation applications as long as the duct diameter is suitable for the airflow of your cooker hood and as long as the working temperature, pressure, and airflow does not exceed the ducts stated maximums which are:

    • Temperature Range - From -30°C to +200°C
    • Air Velocity - 30m/s maximum
    • Working Pressure - Maximum 2500 Pa positive
    You can join two lengths of the Semi-Rigid using a 'Safe Male Connector - 150mm' - this simply plugs in to the duct on either side and creates a seal. you can then secure the joint using quick release worm drive clips and/or aluminium tape.

    |Please do not hesitate to contact me if you have any questions - my direct line is 0208 463 9670

    Kind regards,

    Michael

    Replied by i-sells, 19-11-2015
    #3
    Compression of ducting

    SEMI-RIGID ALUMINIUM FLEXIBLE DUCTING - 3M - 150MM I have recently purchased an extractor hood for my kitchen and before I purchase the above mentioned item, I would like to know if I will be able to compress this 150mm ducting through an aperture of 100mm, albeit an elliptical hole of a wider dimension into my roof space? From the additional details on the PDF (see below) I notice it can be compressed, but to what extent? Your help would really be appreciated. Geoff Stewart Tecflex 500 retains its cross section regardless of state; it can be compressed, extended or formed into bends or offsets with no reduction in area.

    Question by Geoff Stewart, 26-01-2016

    Hello Geoff

    Thank you for your question. When it states compressed it means that the pipe is compressed into a one meter length and can be extended into a 3meter length. If you need to reduce from 150mm-100mm then there is a reducer we do product code QS4256. Just to advise that if you are reducing from 150mm-100mm you will restrict your airflow. If I can help any further please do not hesitate to contact me on 0208 463 9683.

    Kind Regards

    Anita 

    Replied by i-sells, 26-01-2016
    #4
    air flow resistance

    Hi I have a distance of about 1.5 metres from cooker hood to outside vent. This includes one 90 degree bend vertically above the hood to then run horizontally to the outlet. Is the lowest air flow resistance obtained by fully stretching the ducting and trimming off at the outlet or by just stretching enough to fit into the 1.5m run? Thanks David

    Question by DAVID TOPLISS, 15-05-2016

    Hello David

    Thank you for your question. The lowest air flow resistance would be by stretching the semi rigid enough to fit the 1.5m run or another option would be to use the rigid ducting and a bend. If I can help any further please do not hesitate to contact me on 0208 463 9683

    Kind Regards

    Anita

    Replied by i-sells, 17-05-2016
    #5
    This vs Kair

    Other than price, how does this ducting differ from the equivalent Kair semi rigid ducting you also sell?

    Question by Zak, 31-05-2021

    Hello Zak


    Thank you for your question. There is no difference between these items they are just from 2 different suppliers.   

    Kind Regards
    Anita

    Replied by i-sells, 01-06-2021
    #6
    Technical question ask before order placing

    1. Is a 150mm Semi-Rigid Aluminium Flexible hose able to extend in length, or is it only flexible to change orientation? 2. Is it possible to insert a smaller connector and secure it with pressure, similar to securing a PVC flexible hose? 3. Does this specification of hose support my cooker hood with a 17m^3/min suction rate and 820Pa pressure? 4. How do you support or fix the Semi-Rigid Aluminium Flexible hose to reduce vibration and noise when the cooker hood is running?

    Question by Rico, 01-08-2023

    Hi Rico.

    Semi-Rigid Duct arrives in a compressed state, and extends fully to 3m in length.
    If you are connecting it to another 150mm duct, then you would require a 150mm male connector. Hose clips must be used when connecting flexible duct to spigots or connections of any type.
    Semi-Rigis duct is suitable for cooker hood extractors, just keep the ducting as tort as possible (without splitting it) to maintain the best airflow. Least amount of bends as possible too.
    You can support it using banding, or split rings/suspension rings, depending on install type.
    Kind regards,
    Marc

    Replied by i-sells, 01-08-2023
  • DELIVERY
    Delivery: You'll receive in: Cost Min Order
    Free Delivery 3 to 5 Days FREE £100
    Standard 2 to 4 Days £4.99 -
    Express Courier Next day+ £9.95 Any

    View Full Delivery Info

    FREE Delivery for orders over £100 inc VAT.

    + Order before noon for Next Working Day Delivery for items in stock

    Excludes Highlands, Islands, and Certain Postcodes.

    Please Note:
    Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.

View Product on Full Website

You may also like

  1. List Price: £46.64
    Only: £29.14
  2. List Price: £253.46
    Only: £148.67
  3. List Price: £21.76
    Only: £19.79
  4. List Price: £139.82
    Only: £82.02
  5. List Price: £115.73
    Only: £67.87
  6. List Price: £115.73
    Only: £67.87

View similar products in category:
Plastic Ducting

Previous / Next Product