Galvanised Safe Pressed Bend 90 Degree - 100mm
-
DETAILS
100mm 90 Degree Steel Pressed Bend - Safe
-
FEATURES
Features
- Galvanised steel bend with male spigots - Fits inside our range of galvanised spiral and other female coupling products
- The i-sells safe system is a quickly assembled solution based on a double-lipped, factory installedseal made from EPDM rubber.
- Fast and easy to install: Allows installation without sealant or solvents.
- Saves money and time on extra installation steps - Can be twisted and adjusted with tightness unaffected.
- Need further information? Contact our friendly i-sells team for advice on exactly what you need for your project.
-
TECHNICAL
Technical Specifications
Alternative Product Code GALBFU-250 Product Category Bends Round System (mm) 100 Product Type Bend - Pressed 90 Degree Product Group Metal Ducting Product Variety Rubber Seal Material Galvanised Steel Packaged Weight (Kg) 0.274 Packaged Length (mm) 200 Packaged Width (mm) 115 Packaged Height (mm) 200 Temp Max (°C) 250 Temp Min (°C) Seal: -30 Continuous / -50 Intermittent Barcode 5055774700248 Barcode - Type EAN Manufacturer Product Code 257004 Quick Search: QS678 -
REVIEWS
-
Richard ByrneDate Added: Thursday 31 August, 2017
Lightweight, very robust, perfect fit, excellent double seal. I cannot think of any way to rate this less than perfect for my job. And delivery / price were superb
-
-
Q & A
Product Questions
Questions and Answers, do you need more information about this product?
Ask a QuestionYour question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
#1I need to duct a vented dryerDear Ask a Question, I am looking for a ducting solution to a vented tumble dryer. I have a hole through the wall for a "left" holed tumble dryer but the NEW ones on sale are mainly "rear" and so if I put another hole in the wall, the holes would collapse on each other. So I am looking for a "rigid bend" to place into the hole of the tumble dryer and connect with the venting kit that is in the wall. I would be most grateful for your help. The PVC hose is useless - it degraded in less than 6 weeks of use.
Question by Rosemary Cantwell, 06-12-2016Hello Rosemary
You have a couple of options depending on what the connections are at either end, you mention the pvc hose so a different type of flexible hose should connect the same way, therefore semi rigid aluminium may be the simplest solution as you can form a bend which will stay in shape, you can find this in the quick search bar by typing QS2831 or QS2832 depending if your machine has a 100mm or 125mm spigot.Hope this helpsReplied by i-sells, 08-12-2016#2Safe Pressed v PressedWant to use this to vent cooker hood, what is the difference between using the safe pressed product compared to pressed bend product?
Question by Terry, 13-12-2021Good morning Terry. The safe version has the addition of a rubber seal which means you don't need to use sealant. It's probably better for a small project.
Kind regards,Marc.Replied by i-sells, 14-12-2021#4Safe pressed on stoveCan a safe pressed bend be used to connect to a direct air feed on a multi fuel stove?
Question by Keith Fermor, 29-06-2022Good morning Keith. Probably not, as the seal have a maximum temperature rating of 30 degree constant or 50 degrees intermittent.
The bend itself has a temperature rating of 200 degrees constant and 250 degrees intermittent.Kind regards,MarcReplied by i-sells, 30-06-2022 -
DELIVERY
Delivery: You'll receive in: Cost Min Order Free Delivery 3 to 5 Days FREE £100 Standard 2 to 4 Days £4.99 - Express Courier Next day+ £9.95 Any View Full Delivery Info
FREE Delivery for orders over £100 inc VAT.
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.