-
DETAILS
GALVANISED BEND - 90 DEGREE PRESSED - 150MM
Product Information:
- Pressed 90 degree bend.
- Galvanised bends are ';male'; fittings and will slip inside ';female'; spiral duct pipe.
- Fittings should be secured using the appropriate fixing method.
- Larger diameters (250mm+) are available, and are fabricated in segmented style.
- Our fittings are produced in accordance with DW144, and have a rolled edge for safer handling and improved alignment.
-
FEATURES
Features
- Pressed 90 degree bend.
- Galvanised bends are 'male' fittings and will slip inside 'female' spiral duct pipe.
- Fittings should be secured using the appropriate fixing method.
- Larger diameters (250mm+) are available, and are fabricated in segmented style.
- Our fittings are produced in accordance with DW144, and have a rolled edge for safer handling and improved alignment.
-
TECHNICAL
Technical Specifications
Product Category Bends Round System (mm) 150 Product Type Bend - Pressed 90 Degree Product Group Metal Ducting Product Variety Standard Length (mm) 260 Width (mm) 148 Height (mm) 253 Material Galvanised Steel Weight (Kg) 0.643 Packaged Weight (Kg) 0.643 Packaged Length (mm) 265 Packaged Width (mm) 155 Packaged Height (mm) 265 Temp Max (°C) 250 Economy Delivery Not Eligible Barcode 5055774700378 Barcode - Type EAN Manufacturer Product Code 102710 Quick Search: QS8066 -
REVIEWS
-
Trevor MantDate Added: Thursday 10 November, 2016
all acceptable -
Ian RudgeDate Added: Sunday 25 September, 2016
Quality product that arrived on time
-
-
Q & A
Product Questions
Questions and Answers, do you need more information about this product?
Ask a QuestionYour question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
#1DuctHi I am looking for rigid ducting for a Kitchen cooker hood. Slightly confused by you safe duct and duct. will Galss 150 (spiral duct) fit with Gal NP 150 (coupler) and Gal B 150 (90 Bend) ? Does spiral duct fit into these fittings? what is overall high of bend? Thanks in a dance Stephen
Question by Stephen Webster, 09-05-2016Hello Stephen
Thank you for your question. Yes the coupler and bend will fit into the sprial duct. The difference between the safe and vent is that the safe fittings have a rubber seal that will crate a seal when fitted and then you just have to seal your joint with aluminium tape. The vent fittings have to be screwed or riveted to the sprial. The overall height of the bend is 300mmIf i can help any further please do not hesitate to contact me on 0208 463 9683Kind RegardsAnitaReplied by i-sells, 09-05-2016#2Cooker hood ductingHello, If we were to buy a cooker extractor similar to the one on this link. https://www.johnlewis.com/bosch-serie-2-dwp64bc50b-pyramid-chimney-cooker-hood-stainless-steel/p3535603 Could we attach rigid ducting/or this galvanised bend (depending on the height needed to take it over the kitchen cabinets) straight to the 150mm ducting circle at the top of the extractor and do away with any square metal chimney ducting? Hope that makes sense? What else would we need to do this and extract to an outside wall? Thanks for your time
Question by Stacey Green, 28-09-2018Hello Stacey
Thank you for your question. You can fit the 150mm rigid ducting straight onto the spigot on the cooker hood, or if you want to fit the 150mm bend straight onto the cooker hood then a 150mm female sleeve or a piece of 150mm pipe would be required. You would need to know how many meters of 150mm ducting you need to go to the outside wall and you would require a 150mm grille for the outside. If I can help any further please do not hesitate to contact meKind RegardsAnitaReplied by i-sells, 01-10-2018#3Elongated circular galvanised bendHello there, do you offer something similar to this product but in an elongated circular shape? Dimensions of the 2D surface will be 140mmx240mm. Many thanks
Question by Jessica Rafter, 28-01-2019Hello Jessica
Thank you for your question. If you could provide a drawing with the measurements i can ask our fabricator if this is something they could do.My e-mail address is anita.bowers@i-sells.co.ukKind RegardsAnitaReplied by i-sells, 28-01-2019 -
DELIVERY
Delivery: You'll receive in: Cost Min Order Free Delivery 3 to 5 Days FREE £100 Standard 2 to 4 Days £4.99 - Express Courier Next day+ £9.95 Any View Full Delivery Info
FREE Delivery for orders over £100 inc VAT.
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.