-
DETAILS
KAIR SYSTEM 150 ROUND - 150MM 90 DEGREE ELBOW BEND
Product Details:
White Plastic 90 Degree Elbow Bend Connection - Male Spigot will fit inside Kair 150mm Round Pipe (Part: "DUCVKC670") or 152mm Flexible Hose (Part: "DUCP0092/152mm/35").
Easy to install and durable, just push-fit duct and fittings together. Will join any round female part of the Kair System 150 range. Also fits other ranges.Built to last out of high-quality white Polystyrene/Polypropylene plastic Material.
Max / Min Temperature: +60c / -15c.
Kair plastic ducting is lightweight, durable and suitable for commercial and domestic use. It is perfectly suited for ducting your Tumble Dryer, Bathroom or Kitchen extractor fan, Hydroponics, In-Line Extract Fans, or Cooker Hood. It can be used as a part of a long ductwork run for a variety of purposes including whole-house ventilation, passive stack vent, positive input, air conditioning, HVAC, and Heat Recovery Systems.
Round rigid ducting provides superior airflow performance vs. comparative size rectangular or flexible duct. Suitable to use in compliance with Part F Building Regulations.Airflow performance independently tested by BSRIA or BRE.
Static Pressure Drop in Pascals:
- 15 l/s = 1.00 Pa
- 30 l/s = 4.20 Pa
- 60 l/s = 18.20 Pa
All of our Kair products have a full 30-day money-back guarantee.
-
FEATURES
Features
- APPLICATION: The rigid 90-degree bend offers superior airflow performance to flexible ducting.
- EASE OF USE: The system 150mm round ducting fittings have a male spigot and female pipe, ensuring a solid connection.
- COMPATIBILITY: The System 150 round pipe will easily connect to any round fan with 150mm spigot.
- AIRFLOW: When using long duct runs, ensure that your fan has the appropriate power to exert the required force.
- ACCESSORIES: Our 90-degree bend will push fit to a 150mm round pipe or flexible hose when used with a hose clip or tape.
-
TECHNICAL
Technical Specifications
Product Category Bends Round System (mm) 150 Product Type Bend Product Group Plastic Ducting Length (mm) 192 Width (mm) 192 Height (mm) 153 Spigot size (mm) 149 Colour White Material Polystyrene Weight (Kg) 0.192 Packaged Weight (Kg) 0.191 Packaged Length (mm) 150 Packaged Width (mm) 85 Packaged Height (mm) 85 Temp Max (°C) 60 Temp Min (°C) -15 Barcode 5060272542030 Vent Axia (similar) 370295 Manrose (similar) 66900 Polypipe / Domus (similar) 690 Pressure Loss (Pa) 15 l/s 1 Pressure Loss (Pa) 30 l/s 4.2 Pressure Loss (Pa) 60 l/s 18.2 Quick Search: QS278 -
REVIEWS
-
Andrew SimmonsDate Added: Sunday 08 May, 2022
No problems. -
Haryton FeelibDate Added: Friday 09 April, 2021
Good product, Excellent company to deal with -
Colin YoungDate Added: Thursday 16 July, 2020
as expected good quality -
David BallDate Added: Friday 04 May, 2018
Great service as always. -
Gary WinhamDate Added: Sunday 04 December, 2016
Does what it says on the label -
Marc HammondDate Added: Sunday 17 January, 2016
Quick and reliable service. good quality product. -
Mark ElleryDate Added: Wednesday 21 October, 2015
fit perfectly with the 2m straight section of 150mm dia ducting. used to to connect up a cooker hood to the outside wall without converting to stupid square/rectangular ducting, or using naff flexible hose (bad for air flow). -
Mark HarrisonDate Added: Friday 19 June, 2015
Connects together with pipe well, holds without the need to tape or glue, yet easy to push together -
I-sells.co.uk CustomerDate Added: Friday 18 July, 2008
" This site is very quick and had everything I was looking for " Neil, Bristol
-
-
Q & A
Product Questions
Questions and Answers, do you need more information about this product?
Ask a QuestionYour question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
#1connecting ducting on kitchen extractorAm installing new Bosch island chimney extractor and need to purchase 150mm 90 degree bend plus 2meter pipe. Can't figure out the best way to connect the pipe opening at the top of the extractor to the bottom of the 90 degree bend. PIPES ARE RIGID BUT CAN'T BELIEVE THAT YOU USE GLUE - With the heat an all plus the ability to remove for maintenance etc Any ideas?
Question by joe flynn, 09-03-2016Hello Joe
Thank you for your question. The bend will fit directly into the pipe as the bend is a male fitting and the pipe is female you will just seal your joints with duct tape. If you require any further assistance please do not hesitate to contact me on 0208 463 9683Kind RegardsAnitaReplied by i-sells, 09-03-2016#2Parts compatibilityHello, Was considering QS680 which is 270 mm in height to use with QS46641 to vent from top of Bosch Extractor fan out thru kitchen wall, but then saw that QS278 is only 153 mm in height. I need to consider this as I have to allow 750 mm clearance between the gas cooker and the extractor fan. As the fan installation will be quite high QS278 may prove easier to use that QS680, but Q1- is QS278 compatible with QS46641, and Q2 – will it melt, as I note that it is made of polystyrene?
Question by Mark Bennett, 21-07-2018Hello Mark
Thank you for your question. The temperature rating on the plastic bend is Max / Min Temperature: +60c / -15c. if any higher than the 60c then the metal bend will do your application as the temperature rating on this item is much higher.Kind RegardsAnitaReplied by i-sells, 23-07-2018#3Fit size.......I need to fit a 90 deg. bend opnto spigot of Xpelair XID 150 fan which has outside diameter of 147 mm. Is this suitable?
Question by Malcolm Griffiths, 05-02-2021Hello Malcolm
Thank you for your your question. You would require a piece of 150mm pipe as this is female or a female sleeve as both the bend and spigot on your fan are male and will not join togetherKind RegardsAnitaReplied by i-sells, 05-02-2021 -
DELIVERY
Delivery: You'll receive in: Cost Min Order Free Delivery 3 to 5 Days FREE £100 Standard 2 to 4 Days £4.99 - Express Courier Next day+ £9.95 Any View Full Delivery Info
FREE Delivery for orders over £100 inc VAT.
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.