Vectaire HEATREC1003HT Single Room Heat Recovery Ventilator

Vectaire HEATREC1003HDT Single Room Heat Recovery Ventilator

Product Summary:

• 3 Speed centrifugal fan for any domestic wet room
• Energy efficient EC motors
• Efficient, low energy solution to controlling condensation and pollution
• Provides low level continuous ventilation with summer bypass and frost-stat
• Up to 75% heat exchange efficiency
• Choice of two low (trickle) speeds
• Speed can be boosted by user
• Low noise levels and running costs
• Compliant with building regulations parts l1 2013 and f 2013

General

• Single room heat recovery unit for new build or refurbishment
• for areas up to 40m²
• Up to 75% of heat recovered
• Easy to install and maintain
• For installation into walls - can be rotated to four positions
• Two low (trickle) speeds
• Speed 1: 5 litres/sec
• speed 2: 7.5 litres/sec
• boost speed (15 litres/sec) triggered by user with integral pull-cord or a remote switch
• Tube heat recovery cell available in 400mm, 500mm or 600mm lengths
• Heat recovery tube incorporates condensate drainage and weather louvre
• Termination kit enables complete installation from inside (easy to install in high rise buildings)
• Low noise levels
• Low running costs
• Extra security - no need to open windows

Specification

• Efficient and economical
• Casing from shockproof, high quality technopolymer
• Low energy ec motors
• Operates in temperature up to 40ºc
• Easy to maintain
• Filters and heat exchanger removable and washable
• Summer bypass - the heatrec1003 has sensors which monitor the air in-take and extract. When the outside temperature is comfortable and the inside ambient temperature is lower than 18ºc, the air extract motor will be automatically switched off, whilst the air intake motor will continue to operate, ensuring a quick and efficient change of air inside the room. When the outside temperature is higher than 26ºc, the air intake motor will be switched off to ensure entilation without increasing the temperature.
• Integral frost-stat - the unit is fitted with an internal thermostat, which automatically stops the air intake if there is a risk of the heat exchanger freezing up (when the outside temperature is too low) and also avoiding the intake of very cold air.

Compliance

• Part l1 2013 of building regulations for enhanced energy saving capability
• Part f 2013 of building regulations for reliable, efficient ventilation
• EU rohs directive compliant. • Iec 60335-2-80, bt 2006/95/ce and emc 2004/108/ce european directive against radio interference and electro-magnetic compatibility
• CE marked