Manrose QF100H Humidity And Timer Quiet Extractor Fan For Bathrooms and Toilets
-
DETAILS
QF100T Humidity & Timer - Extractor Fan For Bathrooms & Toilets With Integral Backdraught Shutter
Humidity control which is adjustable between 40% RH and 95% RH, complete with adjustable timer (1 -20mins)
The Manrose Quiet Fan is the latest in domestic ventilation to incorporate a high extraction whilst producing an incredibly quiet running volume. Designed for wall and ceiling mounting, this comprehensive range is ideal for bathrooms and toilets. The unit also comes complete with a performance-enhancing turning vane system located in the spigot to improve performance by maintaining a high output.
- High-quality ball bearing, long-life motors continuously rated and warranted for a minimum of 30,000 hours or 3 years
- Manufactured using high ABS thermoplastics for strength and durability
- Decibel Level of ONLY 27dB(A) at 3m. Over 60% reduction in comparison to standard 4” (100mm) domestic fans.
- An impressive extraction rate of 75m3 /hr, 21 litres per second
- Low energy motor with a maximum consumption of 4.8 Watts
- The most environmentally friendly fan in the Manrose range with an SFP of 0.24W/l/s
- Complete with integral backdraught shutters
- Complies with both Part F & L
Quiet, Powerful And Affordable Extract Fan From Manrose
Electrical
220-240V - AC. 50Hz Single Phase consuming 4.8 Watts. These fans are double insulated and do not require an earth. All wiring must comply with current IEE regulations. A double pole isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted. The fan must not be accessible to a person using either the shower or bath and mounted a minimum of 1.8 metres from the floor.
Additional Data
Maximum Pressure: 23 p.a.
Fan Speed: 2300 r.p.m.
Sound Volume: 27 dB(A)
Maximum Operating Temperature: 40°C -
FEATURES
Features
- Timer & Humidity Version
- Quiet - Decibel level of ONLY 27dB(A) at 3m
- Powerful - Extraction rate of 75m3 /hr, 21 litres per second
- Low Costs - Maximum consumption of 4.8 Watts
- Warranted for a minimum of 30,000 hours or 3 years
-
TECHNICAL
Technical Specifications
Timer Yes Humidistat Yes Continuous Running No Product Category Extractor Fan Round System (mm) 100 Product Type Axial Fan Product Group Ventilation Fan Length (mm) 111 Width (mm) 96 Height (mm) 163 Diameter - Outer (mm) 112 Spigot size (mm) 100 Voltage (V) 220-240 IP Rating IP44 Power Max (Watts) 4.8 Decibel Rating (dB) - Max 27 Colour White Packaged Weight (Kg) 0.676 Packaged Length (mm) 170 Packaged Width (mm) 175 Packaged Height (mm) 175 Barcode 5020953501084 Barcode - Type GTIN Manufacturer Product Code QF100H Pressure Loss (Pa) 60 l/s 23 Airflow Performance (l/s) - High 21 Airflow Performance (m³/h) - High 75 Maximum suggested long duct run (Mtr) 1.5 Quick Search: QS18722 -
REVIEWS
-
Earl WilliamsDate Added: Friday 07 April, 2017
Excellent item, exactly what it said on the tin This company has the best after sales I've ever come across Would recommend dealing with this company to anyone -
Ric RayerDate Added: Thursday 18 February, 2016
EXCELLENT SERVICE GOODS DELIVERED WITHIN 24 HRS PART IN GOOD ORDER
-
-
Q & A
Product Questions
Questions and Answers, do you need more information about this product?
Ask a QuestionYour question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
#1insulated ductdoes this extractor come with duct or do i buy separately, if so can it be used with insulated duct?
Question by sim, 29-01-2016Hello Sim,
As a general rule no extractor fans are supplied by the manufacturer with ducting unless as part of a 'kit' - This is because each person's individual installation is different.
We supply a variety of insulated rigid and flexible insulated and non-insulated ducting. if you could describe further details of your installation plans to me I would be happy to help advise further.
Kind regards,
MichaelReplied by i-sells, 29-01-2016#2manrose qf 100hCan this fan be fitted directly over the shower and can it be switched on manually,as well as by the humidistat with an external switch.Thank you peter.
Question by peter williams, 02-02-2016Hello Peter
Thank you for your question. The fan must not be accessible to a person using either the shower or bath and mounted a minimum of 1.8 metres from the floor. If you require a fan to be installed over the shower then you will require a selv fan (Safety Extra Low Voltage) these can be found on our website as there are quite a few to choose from. If you still require assistance please do not hesitate to contact me on 0208 463 9683
Kind Regards
Anita
Replied by i-sells, 02-02-2016#3not turningthis fan stopped turning although the odd time I go into this shower room (light is what activates) turned on I can hear motor trying to work but nothing just the very odd time. I would like to know as a lady pensioner and call out is so costly could this be simple job
Question by susan kirsopp, 20-05-2019Hello Susan
I think the first call should be to the Manrose technical helpline and would recommend that you have someone with you that has some electrical knowledge as tey may run through a telephone diagnostic which may involve re setting the equipment. Their number is 01753 691399 and please ask for technical help.Replied by i-sells, 21-05-2019#4Pull cordCan an external pull cord be wired into the fan circuit.
Question by Mike Goulding, 24-06-2019Hello Mike
Thank you for your question. This model comes with a pullcord. The product code for this item is QS18724. If I can help any further please do not hesitate to contact meKind RegardsAnitaReplied by i-sells, 24-06-2019#5wiringI want to replace an existing unit with this one and wish to know what the wiring configuration is. The existing is a Ductex 4" with cable entry at the bottom with the switching connections top left
Question by jim kerr, 07-03-2022Hi Jim.
I have a document which I will email over to you shortly. It should give you your answers.Kind regards,Marc.Replied by i-sells, 07-03-2022#6Can this be used with the humidistat only?Hi, please forgive my ignorance. I’m looking to use this fan in a small (10ft by 5ft) single skin brick shed/outbuilding to control humidity and hopefully prevent mould and rust buildup on tools/equipment etc. I have no need of the timer function and am looking for a fan to sense humidity and switch on as necessary with no input from switch. Would this product be suitable? And would you recommend an air brick on the opposite side of the building to further promote airflow. Thanks
Question by Tom, 30-08-2023Good morning Tom.
In theory, yes, but you may need to build a housing for it on the inside, as the wall sounds like it won't be thick enough to house the fan spigot, the spigot on the back of the grill, and some ducting to connect them.The fan will also need to be wired via a fused spur for safety.a 100mm louvred grill on the outside would suffice.Kind regards,MarcReplied by i-sells, 31-08-2023 -
DELIVERY
Delivery: You'll receive in: Cost Min Order Free Delivery 3 to 5 Days FREE £100 Standard 2 to 4 Days £4.99 - Express Courier Next day+ £9.95 Any View Full Delivery Info
FREE Delivery for orders over £100 inc VAT.
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.