Vectaire ELX1003 Elix Centrifugal Fan - 3 Speed - Pullcord - Remote Switching
-
DETAILS
VECTAIRE ELX1003 ELIX CENTRIFUGAL FAN - 3 SPEED - PULLCORD / REMOTE SWITCHING
GENERAL FEATURES
- Exhausts directly to the outside or through long lengths of ducting (up to 15m)
- Runs continuously at the pre-selected choice of two speeds (fixed at installation)
- Speed 1 operates at 8 l/s (factory set)
- Speed 2 operates at 14 l/s
- Anti-vibration gasket
- Easily removable, washable polypropylene filter
- Energy-saving ventilation
- Extremely low running costs
- Low carbon footprint
- 5-year warranty
- Speed boosted to maximum (28 l/s) using integral pull cord or by the following optional accessories (Available separately):
- Remote switch/light switch
- PIR sensor
- DRH240 (dynamic remote humidistat)
Specification
- Shockproof, high-quality technopolymer casing
- Designed using the latest wind tunnel technology and CFD simulations
- Profile increases the fluid dynamics
- EC induction motor with thermal protection
- 30,000-hour life motors with maintenance-free and long-life ball bearings
- Operates in ambient temperatures up to 40ºC
- Double insulated - no earth required
- IPX4 - Splashproof rated
Compliance
- Part L1 2010 of Building Regulations for enhanced energy saving capability
- Part F 2010 of Building Regulations for reliable, efficient ventilation
- IEC 60335-2-80, BT 2006/95/CE and EMC 2004/108/CE European Directive against radio interference and electromagnetic compatibility
- CE marked
- SAP Q eligible
- Energy Saving Trust Best Practice Compliant
Range
- ELX1003 - 3 speed, cord or remote
- ELX1003DT - 3 speed, continuous running with comfort timer (timer does not activate unless fan has been running for 2 minutes to avoid unnecessary night-time operation) and pull-cord
- ELX1003HDT - with comfort timer, humidistat and pull-cord
- ELX1003LV - 3 speed, continuous running with pull-cord - LOW VOLT (SELV)
- ELX1003DTLV - 3 speed, continuous running, with comfort timer, overrun timer and pull-cord LOW VOLT (SELV)
- ELX1003HDTLV - 3 speed, continuous running, with comfort timer, humidistat and pull-cord - LOW VOLT (SELV)
Typical Specification
Supply and Install an ELX1003 high performance, energy-efficient centrifugal fan which has been tested and is SAP Q Eligible and suitable for ALL domestic wet rooms as supplied by Vectaire Ltd, Lincoln Road, Cressex Business Park, High Wycombe, Bucks, HP12 3RH. The fan is to be suitable for installation either into a wall or ceiling (with the appropriate accessories) and to have an air intake around the whole perimeter and have a footprint of no more than 180mm square. The fan is to be continuous running at its low speed (with a choice of two lower speeds) and be capable of being boosted to maximum speed by means of an integral pull cord or (with the cord removed) a remote switch, PIR sensor or humidistat. The fan should have specific fan power (as tested by BRE) of no higher than 0.22w/l/s in a kitchen and 0.16w/l/s in a bathroom. The fan must not exceed 2.0w power consumption at the lowest speed. The fan casing should be made of shock-proof, high-quality technopolymer, and should have an EC induction motor with maintenance-free, long-life ball bearings, and up to a 43,000-hour life. It should be protected with a thermal cut-out. The fan should be double insulated and be lPX4 splashproof protected suitable for installation into Zones I and Il. The fan is to comply with IEC 60335-2-80, LVD2006/95/CE and EMC 2OO4/108/CE European Directive against radio interference and electro-magnetic compatibility, be CE marked. The fan should have 5-year manufacturer’s warranty and be supplied with a user guide as required, and SAP Q Eligible. Only approved accessories should be used: Wall Plates – as required Wall terminations – all wall terminations must use the approved wall cowl or high rise kit.
-
FEATURES
Features
- 3 speed continuous-running centrifugal fan with pull-cord boost.
- Can be wall or ceiling mounted in any domestic wet room. Can be ducted up to 15m.
- Provides low level continuous ventilation to combat condensation
- Complies with Building Regulations Parts L1 2013 and F 2013
- 5 year warranty. CE Marked. SAP Q Eligible. EST Best Practice Compliant.
-
TECHNICAL
Technical Specifications
Made to order No Timer No PIR No Humidistat No Pullcord Yes Continuous Running Yes SELV No Product Category Extractor Fan Round System (mm) 100 Product Type Centrifugal Fan Product Group Ventilation Fan Length (mm) 116 Width (mm) 180 Height (mm) 180 Spigot size (mm) 99 Face Size (mm) 180 x 180 Voltage (V) 230 IP Rating IPX4 Phase 1 Power Min (Watts) 1.3 Power Max (Watts) 15 Decibel Rating (dB) - Low 15.5 Decibel Rating (dB) - Max 35 Colour White Colour - Internal White Colour - External White Material Shockproof Technopolymer Weight (Kg) 1.05 Packaged Weight (Kg) 1.05 Packaged Length (mm) 190 Packaged Width (mm) 140 Packaged Height (mm) 190 Temp Max (°C) 40 Thickness (mm) 87 Barcode 5055169701805 Barcode - Type EAN Manufacturer Product Code ELX1003 Airflow Performance (l/s) - Low 8 Airflow Performance (l/s) - Med 14 Airflow Performance (l/s) - High 28 Airflow Performance (m³/h) - Low 28.8 Airflow Performance (m³/h) - Med 50.4 Airflow Performance (m³/h) - High 100.8 Maximum suggested long duct run (Mtr) 15 Fan Operation Modes 2 SAP Appendix Q applicable Yes Warranty (Years) 5 Quick Search: QS39006 -
REVIEWS
-
Q & A
Product Questions
Questions and Answers, do you need more information about this product?
Ask a QuestionYour question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
#1Replacement bathroom ext fan5 year old Eco1003 getting noisy. Will this fan be a suitable replacement. (Using existing fixing screw holes.)
Question by david liley, 24-11-2021Good morning David. If it is fitted in a window, then no, but if it is fitted through a wall, then it will fit, but the screw holes may be in a slightly different position.
Kind regards,Marc.Replied by i-sells, 25-11-2021 -
DELIVERY
Delivery: You'll receive in: Cost Min Order Free Delivery 3 to 5 Days FREE £100 Standard 2 to 4 Days £4.99 - Express Courier Next day+ £9.95 Any View Full Delivery Info
FREE Delivery for orders over £100 inc VAT.
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.