315mm Inline Duct Heater 9000 Watt 400V 3 Phase
-
DETAILS
Electrical inline duct heater
Inline Duct heater with spigot connection for standard spiral ducts. Manufactured from Aluzinc-coated sheet steel with a heating element in stainless steel. The duct heater has integral overheating protection with a manual reset function. The duct heater has rubber seals on the connecting spigots. Suitable for control by room thermostat or Pulser. The minimum air volume is based on a minimum air velocity of 1.5 m/s. These inline duct heaters are designed for a maximum output air temperature of 50°C. The ductwork heater units can be installed in a horizontal or vertical duct. In horizontal ductwork, the connection box should be installed facing upwards or rotated 90° to one side. Installation with the connection box facing downwards is not allowed.
-
TECHNICAL
Technical Specifications
Made to order Yes Product Category Duct Heaters Round System (mm) 315 Product Type Duct Heater Product Group Metal Ducting Product Variety 9000W 400V 3 Phase Economy Delivery Not Eligible Next Day Delivery Not Eligible Quick Search: QS9725 -
REVIEWS
-
Q & A
Product Questions
Questions and Answers, do you need more information about this product?
Ask a QuestionYour question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
#2Technical Information - UrgentGood Afternoon, Please can you email across the technical information for this product at your earliest convenience, and importantly the product dimensions? I cant seem to access the PDF's on the website. Many thanks for your help Kind regards Sonia
Question by Sonia, 02-05-2017Hello Sonia
Thank you for your inquiry. I will send you the information on a separate e-mail.Kind RegardsAnitaReplied by i-sells, 02-05-2017#3CFMHi there, what temperature increase could I expect from a heater this size if I was pulling 2,000CFM of air through it? Thank you!
Question by Wes, 21-12-2017Hello Wes
Thank you for your question. These duct heaters are designed for a maximum output air temperature of 50°C. I hope this helps.Kind RegardsAnitaReplied by i-sells, 03-01-2018#4Suitable FanWhat duct fan would you recommend for this duct heater. I have a 22mtr x 12 mtr garage to heat would these be suitable and would three independantly controlled units ba sufficient. Is there a minimum/maximum length of duct?
Question by David Andrews, 06-12-2021Hi David.
The fan would be needs to be the same size as the ducting. As you have chosen a 315mm Duct Heater, you would need a 315mm fan, however, the one you chose was 3phase. Do you have single or 2 phase electrics?a 315mm single phase mixed flow fan can cope with 5m of straight ducting, if the ducting is going to be longer, then you need a centrifugal fan possibly. We would need to know some more information to give you an accurate answer.Kind regards,Marc.Replied by i-sells, 08-12-2021#5Fans/HeatersHi, I have contacted you before hopefully i can now give you more info. I have an area to heat, i want to use the heater above (there will be three independant) i want three phase to try and balance the load more effectively. Basically i want to mount the heater in a duct (near the output end) and then mount the fan further back, can you advise on which fan i should use, does there have to be an interlock between the fan and the heater in case the fan fails? can i use a standard room stat via a contactor for control? What is the best output spigot to put on the end. Thankyou
Question by David Andrews, 13-01-2022Hello David
Thank you for your question. Please see below the manufacturers number to give them a call as they will be able to advise you further.Systemair: 01634 295724.Replied by i-sells, 14-01-2022 -
DELIVERY
Delivery: You'll receive in: Cost Min Order Free Delivery 3 to 5 Days FREE £100 Standard 2 to 4 Days £4.99 - Express Courier Next day+ £9.95 Any View Full Delivery Info
FREE Delivery for orders over £100 inc VAT.
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.