Pack of 6 x Kair Rectangular Flat Ducting 220mm x 90mm - 2 Metre Length Flat Channel Pipes
-
DETAILS
Pack of 6 x Kair Rectangular Flat Ducting 220mm x 90mm - 2 Metre Length Flat Channel Pipes
White plastic rectangular ducting pipe - 220mm x 90mm x 2000mm (2 metre length).
Kair System 220 (SYS-220) ducting has comparable airflow performance to 150mm Round Duct. Is designed to be low profile to fit inside ceilings, floor slabs, or to be concealed above kitchen wall units. It is best utilised as part of a ducting system for high powered cooker hood extractors and whole house ventilation systems, such as heat recovery systems or mechanical ventilation systems in offices, houses, and apartments.
- Made in the UK using uPVC Plastic.
- Flat channel ventilation ducting pipe can be used a variety of ventilation purposes. Rigid flat pipe offers superior airflow performance to flexible ducting.
- Max / Min Temperature: +60c / -15c.
- Can be cut to suit.
- Suitable to use in compliance with Part F Building Regulations.
- Airflow performance independently tested by BSRIA or BRE.
- Free Air = 18,545mm2.
- Static Pressure Drop in Pascals: 60 l/s = 1.2 Pa - 120 l/s = 3.9 Pa - 180 l/s = 8.1 Pa.
Installation Tips:
- Kair plastic ducting pipe is lightweight & easy to install. You simply push-fit the duct pipe and fittings together. For permanent fixings, you can seal the joints with a method of your choice (Popular options include silicone sealant, solvent cement, or tape).
- Plastic ducting can be carefully cut to the required size using a hacksaw. Offcuts are always useful to keep to hand for joining two male fittings
- Lengths of duct channel can be joined together using a female connector (Part: "DUCVKC5708").
- We recommend that you use flat channel ducting clips to fix ductwork to walls and ceilings and support ducting tube (Part: "DOM922").
- If your duct run passes through a particularly cold area, we would recommend considering using our pre-insulated ducting to avoid condensation building up within your ductwork. Click here to view our range of pre-insulated plastic ducting.
Looking for an alternative size?
Kair plastic ducting pipes are available in the following sizes:
Round Systems:
Round Ducting System 1 Metre Length 2 Metre Length Flexible Alternative 100mm Round (System 100) DUCVKC250 DUCVKC2992 DUCP0092/102/35 125mm Round (System 125) DUCVKC267 DUCVKC2692 DUCP0092/127/35 150mm Round (System 150) DUCVKC670 DUCVKC673 DUCP0092/152/35 Click here to view our full range of round pipes
Rectangular Systems:
Rectangular Ducting System 1 Metre Length 2 Metre Length Flexible Alternative 110mm x 54mm (System 100) DUCVKC249 DUCVKC297 DUCR3M/110/55 150mm x 70mm (System 125) DUCVKC604 DUCR3M/150/70 180mm x 95mm (System 150) DUCVKC651 DUCR3M/220/90 204mm x 60mm (System 204) DUCVKC5604 DUCVKC5629 DUCR3M/206/62 220mm x 90mm (System 220) DUCVKC5704 DUCVKC5729 Click here to view our full range of rectangular pipes
Looking for Compatible Fittings?
Compatible with the extensive Kair SYS-220 and Megaduct range of fittings, outlets, and grilles.
- Pipe ends are considered as male fittings and will fit inside Kair SYS-220 female fittings such as connectors or degree bends.
- A variety of adaptors are available to connect to other systems:
- Click here to view our range of straight adaptors
- Click here to view our range of airbrick adaptors
- Click here to view our range of elbow connectors
Click here to view the full range of Kair 220mm x 90mm Rectangular Ducting Products.
Click here to view the full range of Megaduct 220 Rectangular Ducting Products.
Common applications:
The Kair range of plastic ducting is commonly used for the following applications:
- Bathroom Extractor Fan Ducting
- Kitchen Extractor Fan Ducting
- Cooker Hood Ducting
- Heat Recovery Unit Ducting
- Air Conditioning Ducting
- HVAC Ducting
- Tumble Dryer Ducting
- Hydroponics Ventilation Ducting
- Whole House Ventilation Ducting
- Positive Input Ventilation System Ducting
-
FEATURES
Features
- White plastic rectangular ducting pipe - 220mm x 90mm x 2000mm (2 metre length)
- Offers comparable airflow performance to 150mm Round Duct
- Easy to install, just push-fit duct and fittings together
- Best utilised as part of a ducting system for high powered cooker hood extractors and whole house ventilation systems
- Airflow performance independently tested by BSRIA or BRE
-
TECHNICAL
Technical Specifications
Alternative Product Code DUCVKC5728 Product Category Flat Channel Flat System (mm) 220x90 Product Type Pipe Product Group Plastic Ducting Length (mm) 2000 Width (mm) 220 Height (mm) 90 Diameter (mm) 220 x 90 Spigot size (mm) 220x90 Free Area (mm²) 18545 Colour White Material uPVC Packaged Weight (Kg) 3.8 Packaged Length (mm) 2001 Packaged Width (mm) 220 Packaged Height (mm) 95 Temp Max (°C) 60 Temp Min (°C) -15 Economy Delivery Not Eligible Barcode 5060272546694 Xpelair (similar) FMD / 89758AA Polypipe / Domus (similar) D4-2000 Pressure Loss (Pa) 60 l/s 2.3 Pressure Loss (Pa) 120 l/s 7.8 Pressure Loss (Pa) 180 l/s 16.3 Quick Search: QS51655 -
REVIEWS
-
Q & A
Product Questions
Questions and Answers, do you need more information about this product?
Ask a QuestionYour question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
-
DELIVERY
Delivery: You'll receive in: Cost Min Order Free Delivery 3 to 5 Days FREE £100 Standard 2 to 4 Days £4.99 - Express Courier Next day+ £9.95 Any View Full Delivery Info
FREE Delivery for orders over £100 inc VAT.
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.