Kair Rectangular Straight Connector 150mm x 70mm Flat Pipe Joint
-
DETAILS
KAIR SYSTEM 125 150MM x 70MM RECTANGULAR DUCTING STRAIGHT FEMALE CONNECTOR
Product Details:
Female connector to join lengths of duct channel. Kair 150mm x 70mm pipe - (Part: "DUCVKC604") will fit inside the connector. Kair System 125 Flexible Hose (Part: "DUCR3M/150/70") will fit over the connector.
It is easy to install, just push-fit ducting and connector together. For permanent fixings, seal joints with a method of your choice (Popular options include silicone sealant, solvent cement, or tape).- Suitable to use in compliance with Part F Building Regulations.
- Airflow performance independently tested by BSRIA or BRE.
- Static Pressure Drop in Pascals: 15 l/s = 0.10 Pa - 30 l/s = 0.44 Pa - 60 l/s = 1.95 Pa.
- Max / Min Temperature: +60c / -15c.
- Material: Polystyrene/Polypropylene.
- Made in the UK
Kair System 125 (SYS-125) Rectangular Ducting is designed for use with medium capacity extraction systems and cooker hoods. It is perfect for flush fitting against ceilings and walls and can be concealed above wall units or inside ceiling voids.
Kair plastic ducting is lightweight, durable and suitable for commercial and domestic use. It is perfectly suited for ducting your tumble dryer, bathroom or kitchen extractor fan, hydroponics, in-line extract fans, or a cooker hood. This connector can be used as a part of a long ductwork run for a variety of purposes including whole-house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems.Not quite the right size?
We stock a range of flat channel connectors for the following duct sizes:
- 110mm x 54mm (System 100)
- 150mm x 70mm (System 125)
- 180mm x 95mm (System 150)
- 204mm x 60mm (System 204 / Supertube 204 / 204 FastSeal)
- 220mm x 90mm (System 220 / Megaduct 220 / 220 FastSeal)
- 234mm x 29mm (System 225)
- 310mm x 29mm (System 300)
Click here to view our full range of Flat Channel Connectors.
Looking for compatible ducting?
Click here to view the full range of Kair 125mm Round / 150mm x 70mm Rectangular Ducting Products.
-
FEATURES
Features
- Female connector to join lengths of duct channel.
- System 125 rectangular male flat ducting pipe will fit inside connector.
- System 125 flexible hose will fit over the connector.
- Durable construction.
- Made in the UK.
-
TECHNICAL
Technical Specifications
Product Category Connectors Flat System (mm) 150x70 Product Type Connector Product Group Plastic Ducting Length (mm) 72 Width (mm) 154 Height (mm) 74 Socket size (mm) 150 Colour White Material Polystyrene Weight (Kg) 0.063 Packaged Weight (Kg) 0.064 Packaged Length (mm) 70 Packaged Width (mm) 156 Packaged Height (mm) 70 Temp Max (°C) 60 Temp Min (°C) -15 Barcode 5060272541736 Barcode - Type EAN Manrose (similar) 58200 Pressure Loss (Pa) 15 l/s 0.1 Pressure Loss (Pa) 30 l/s 0.44 Pressure Loss (Pa) 60 l/s 1.95 Quick Search: QS338 -
REVIEWS
-
Dominic Armstrong
5 / 5 stars
Date Added: Friday 26 October, 2018
THE RECTANGULAR DUCTING 150MM X 70MM - FLAT CHANNEL CONNECTOR IS AS LISTED AND SEEMS TO BE GOOD QUALIY. THE ORDERING PROCESS WAS EASY AND DELIVERY WAS VERY QUICK, THANK YOU. -
Zulfiqar Ali 5 / 5 stars
Date Added: Monday 11 December, 2017
Very satisfied -
David Husk 5 / 5 stars
Date Added: Monday 14 August, 2017
Excellent service , arrived next day -
Kuldip Chexal 5 / 5 stars
Date Added: Monday 05 September, 2016
All parts of the 125 set up worked very well. Very satisfied.
-
-
Q & A
Product Questions
Questions and Answers, do you need more information about this product?
Ask a QuestionYour question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
#1RECTANGULAR DUCTING 150MM X 70MM - FLAT CHANNEL CONNECTORIs there a version of this product available with a damper incorporated?
Question by Michael, 05-05-2017Hello Michael
Thank you for your question. Unfortunately the connector with damper is not available in this system. The only item with a damper is the air brick product code QS348. If I can help any further please do not hesitate to contact me on 0208 463 9683Kind RegardsAnitaReplied by i-sells, 05-05-2017#2ducting for cooker extractorI am trying to install a wall mounted cooker extractor with rear vent size 145x65 to vent directly through an exterior wall. Unfortunately no ducting kit is supplied or available. Would your rectangular ducting be suitable if it could be attached to the extractor with metal tape to create a seal?
Question by Michael, 24-09-2017Hello Michael
The dimensions you quote are very close to our system 125mm (rectangular equivalent) of 150mm x 70mm outer dimension (OD) and how suitable this will be will depend whether you have measured the internal (ID) or OD. Rectangular straight duct is a male connection so the internal dimension will be approx 148mm x 68mm and may fit around a spigot of the size 145 x 65, this product can be found by entering QS332.Replied by i-sells, 26-09-2017 -
DELIVERY
Delivery: You'll receive in: Cost Min Order Free Delivery 3 to 5 Days FREE £100 Standard 2 to 4 Days £4.99 - Express Courier Next day+ £9.95 Any View Full Delivery Info
FREE Delivery for orders over £100 inc VAT.
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.
You may also like
-
List Price: £90.05
Only: £54.90 -
List Price: £7.99
Only: £4.58 -
List Price: £24.73
Only: £20.27 -
List Price: £56.57
Only: £31.81 -
List Price: £31.44
Only: £21.41 -
List Price: £2.59
Only: £2.50