<< Close Menu
Close Menu >>
Top » Plastic Ducting

Kair Ceiling Extract Valve 125mm - 5 inch White Coated Metal Vent

Model: DUCMW124
Search: QS4246
  • Kair Ceiling Extract Valve 125mm - 5 inch  White Coated Metal Vent
  • Kair Ceiling Extract Valve 125mm - 5 inch  White Coated Metal Vent
  • Kair Ceiling Extract Valve 125mm - 5 inch  White Coated Metal Vent
  • Kair Ceiling Extract Valve 125mm - 5 inch  White Coated Metal Vent
  • Kair Ceiling Extract Valve 125mm - 5 inch  White Coated Metal Vent
  • Kair Ceiling Extract Valve 125mm - 5 inch  White Coated Metal Vent
Availability: In Stock
List Price: £23.60
Only: £13.31 Inc VAT
  • DETAILS

    125MM WHITE COATED METAL CEILING EXTRACT VALVE (DUCMW124)


    • High-Quality White Powder-Coated Metal 5 inch / 125mm Ceiling Air Extract Vent. The air flow is adjusted by rotating the control disc. Male Spigot will fit inside Kair 125mm round female rigid ducting

    • Discreet modern design which is suitable for flush fitting against ceilings and walls. Designed to extract air. If you are looking to supply air we recommend using a supply valve

    • Easy to install, just push-fit duct and fittings together. Perfectly suited for use as a extract point with your Bathroom or Kitchen extractor fan, Hydroponics fan, or In-Line Extract Fan. This valve can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive ventilation, positive input, air conditioning, HVAC, and Heat Recovery Systems.

    • Aesthetically pleasing wipe-clean design. Suitable for internal use in compliance with Part F Building Regulations. If you are looking for a Fire Rated Extract Valve you will need the Fire Rated version of this product

    • Genuine Kair Product & covered by the Kair 100% Satisfaction Guarantee. Compatible with the extensive SYS-125 range of fittings, outlets, and grilles
  • FEATURES

    Features

    • High-Quality White Powder-Coated Metal 5 inch / 125mm Ceiling Air Extract Vent
    • Discreet modern design, suitable for flush fitting against ceilings and walls
    • Easy to install, just push-fit duct and fittings together
    • Aesthetically pleasing wipe-clean design, suitable for internal use in compliance with Part F Building Regs
    • Compatible with the extensive SYS-125 range of fittings, outlets, and grilles
  • TECHNICAL

    Technical Specifications

    Replaces Product Code GALKSU-125
    Product Category Ceiling Vents
    Round System (mm) 125
    Product Type Extract Valve
    Product Group Plastic Ducting
    Length (mm) 165
    Width (mm) 165
    Height (mm) 60
    Spigot size (mm) 125 x 125 x 47
    Colour White
    Colour - External White
    Material Epoxy Coated Steel
    Weight (Kg) 0.358
    Packaged Weight (Kg) 0.35
    Packaged Length (mm) 55
    Packaged Width (mm) 170
    Packaged Height (mm) 170
    Temp Max (°C) 60
    Temp Min (°C) -15
    Barcode 5060272541408
    Quick Search: QS4246
  • REVIEWS
      Rated 5/5 based on 1 customer reviews
      Add Your Review
    1. Donal Dunne
      5 / 5 stars
      Date Added: Tuesday 31 May, 2016
      Great product, delivered on time. Very happy
  • Q & A

    Product Questions

    Questions and Answers, do you need more information about this product?

    Ask a Question

    Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.

    #1
    Rust

    Is this item adequately protected from rusting over time in high humidity conditions like a shower room?

    Question by David Russell, 13-08-2016

    Hello David
    I think this will be difficult to answer satisfactorily as it would depend on the test conditions and actual installation type.
    For instance the item is galvanised and the visible face is powder coated but is installed with metal screws which may expose the metal in small areas. Its exposure to condensate would also be directly related to the ventilation system it is installed with, if it was a responsive form of extract (light or humidity controlled) then there is a possibility that when the extraction is not running some residual humidity would form on the surface and over time this must have an eventual corrosive effect.
    If however it was installed as part of a constant running system with automatic boost facility the exposure to condensate would be much reduced and the life expectancy increased.
    In essence we would probably recommend that the very similar plastic version should be used in wet rooms.
    I hope this helps.
    Regards
    Ian   

    Replied by i-sells, 15-08-2016
    #2
    Fixing

    How exactly is this item secured to the ceiling?

    Question by David Russell, 13-08-2016

    Hello David
    The product is in two sections, a collar with flange is inserted into the ceiling aperture and screwed in place, the vent has an internal spigot which is inserted into the collar and fixed with a quarter turn screw motion, it is removed for cleaning by reversing the quarter turn.
    In regard to the previous question the plastic version can be found by entering QS275 in the search bar.
    Regards
    Ian

    Replied by i-sells, 15-08-2016
    #3
    Can I use this for external use

    I want to duct out to a soffit (i.e. downwards) - could this be used in an external application on a generally out of weather area (such as a wide soffit)? If not, what options would you recommend for this?

    Question by James Addy, 24-03-2017

    Hello James


    Thank you for your question. I would recommend the 125 mm round grille with mesh the product code for this item is QS350. As the extract valve is used in internal applications and does not have the mesh so fly's and spiders will crawl inside. If i can help any further please do not hesitate to contact me.

    Kind Regards
    Anita

    Replied by i-sells, 27-03-2017
    #4
    125mm Extract Valve Availability

    Good Morning, Could you please confirm: - the availability and cost of 2no. of these diffusers? - the colour/ finish of the product? Is it available in RAL 9010 (pure white)? - are there any other close matches to the Ecoclima diffuser you can provide? - estimated delivery times to the Battersea Phase 3A project, 188 Kirtling Street, London, UK? Thanks, Mayu

    Question by Mayu Bagirathan, 27-06-2019

    Hello Mayu
    Further to our previous answers there is another identical diffuser which you can view by putting QS4246 into the search bar. We currently hold 33 at our main warehouse and 11 at our Sidcup branch, delivery would be the same 1 - 4 days

    Replied by i-sells, 27-06-2019
    #5
    Change of Delivery Address

    Hello. I wanted to select a different delivery address but didn't get the option whilst placing the order. Is it possible to have it delivered here please - Mr B Fowler 14 Chambers Way, Wokingham RG40 5AL

    Question by Tracy, 10-08-2021

    Hello Tracy


    Thank you for your question. I have passed your delivery details over to our warehouse to get this changed for you

    Kind Regards
    Anita

    Replied by i-sells, 10-08-2021
  • DELIVERY
    Delivery: You'll receive in: Cost Min Order
    Free Delivery 3 to 5 Days FREE £100
    Standard 2 to 4 Days £4.99 -
    Express Courier Next day+ £9.95 Any

    View Full Delivery Info

    FREE Delivery for orders over £100 inc VAT.

    + Order before noon for Next Working Day Delivery for items in stock

    Excludes Highlands, Islands, and Certain Postcodes.

    Please Note:
    Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.

View Product on Full Website

You may also like


View similar products in category:
Plastic Ducting

Previous / Next Product