Kair Rotating Elbow Bend Adaptor 204mm x 60mm to 150mm - 6 inch Rectangular to Round 90 Degree Bend
-
DETAILS
Rotating Elbow Bend Adaptor 204x60mm to 150mm
Product Details:
Kair 90 degree ducting plenum bend with round and rectangular spigots. At one end there is a rotating 150mm Round Male Spigot that fits inside Kair 150mm round duct pipe (Part: DUCVKC670 ) or flexible hose (Part: DUCP0092/152/35 ).
The other end is a female spigot and fits over Kair 204mm x 60mm Rectangular Duct Pipe (Part: DUCVKC5604 ). PVC Flexible Hose 206mm X 62mm (DUCR3M/206/62) will fit over the spigot.
Plenum bends allow you to run duct inside ceiling voids or other areas where space is restricted. A rotating spigot allows for easy adjustment.It is easy to install just push-fit together & seal if required using a method of your choice (Popular options include Mastic Sealant Poly Cement or Tape).
Compact dimensions. Perfect for flush fitting against ceilings and walls.. Perfectly suited for ducting your Bathroom or Kitchen extractor fan, Hydroponics, In-Line Extract Fans, Tumble Dryer, or Cooker Hood. This bend can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input ventilation, air conditioning, HVAC, and Heat Recovery systems.
This listing is for a genuine Kair Product. Accept no imitations. Kair Ventilation Ltd offers a 100% Satisfaction Guarantee for your peace of mind. Kair ducting is made in the UK using high-quality plastic.
Unlike generic products, Kair products are compatible with the extensive range of fittings outlets and grilles in multiple sizes to offer you a complete solution for all of your ventilation needs.
For other sizes please use the search bar above. Kair Ducting comes in the following sizes:
100mm Round 125mm Round 150mm Round 110mm x 54mm Rectangular
150mm x 70mm Rectangular 180mm x 95mm
Rectangular 204mm x 60mm
Rectangular 220mm x 90mm
Rectangular 234mm x 29mm
Rectangular 310mm x 29mm Rectangular.
If you have any questions please do not hesitate to ask fellow purchasers via the Customer Questions & Answers system below.
-
FEATURES
Features
- 1x 150mm round rotating male spigot 1x 204x60mm rectangular female spigot
- Allows you to convert between system 150 150mm round and system 204 204mm x 60mm rectangular ducting
- Plenum bend allows you to run duct inside celling voids or other areas where space is restricted
- Made in the UK using high-quality Polystyrene/Polypropylene plastic
- Max / Min Temperature: +60c / -15c
-
TECHNICAL
Technical Specifications
Product Category Adaptors Round System (mm) 150 Flat System (mm) 204x60 Product Type Bend Product Group Plastic Ducting Product Variety 204mm x 60mm to 150mm Length (mm) 240 Width (mm) 210 Height (mm) 85 Spigot size (mm) 150 Socket size (mm) 205 Colour White Material Polystyrene Weight (Kg) 0.252 Packaged Weight (Kg) 0.247 Packaged Length (mm) 230 Packaged Width (mm) 210 Packaged Height (mm) 64 Temp Max (°C) 60 Temp Min (°C) -15 Barcode 5060272542504 Vent Axia (similar) 436626 Xpelair (similar) FPP150 Polypipe / Domus (similar) 641 Pressure Loss (Pa) 15 l/s 1.46 Pressure Loss (Pa) 30 l/s 5.85 Pressure Loss (Pa) 60 l/s 23.46 Quick Search: QS315 -
REVIEWS
-
Andrew Simmons
4 / 5 stars
Date Added: Sunday 08 May, 2022
Nice offset feature but feels a little flimsy (not too much though). I would still buy again though as the feature is so useful. -
Carole Williams
5 / 5 stars
Date Added: Tuesday 25 April, 2017
Super product delivered on time
-
-
Q & A
Product Questions
Questions and Answers, do you need more information about this product?
Ask a QuestionYour question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
#1Kitchen installationGood morning, We have a filtered hob extract system which vents into a narrow (approx 4 inch high) space above kitchen cupboards. We wish to duct the flow through an outside wall, involving a horizontal run of about 8 feet. This fitting appears ok for the point above the hob and also the ducting to the wall. Do you supply an adaptor to join the ducting to a, through the wall tube ? Best regards Roy Bamford
Question by Roy Bamford, 12-08-2016Hello Roy
If you go to the search bar and type in QS309 you will find a round to rectangular adapter which will convert the straight system 204 to a 125mm round , if you need to go through the wall for any length the round tube will be in the system 125 section umder plastic ducting.I hope this helps.RegardsIanReplied by i-sells, 15-08-2016#2DimensionsIs the diameter measurement of 149mm internal or external?
Question by MARTIN, 02-05-2019Hello Martin
Thank you for your question. The 149mm is the internal dimension and the outside dimension is 152mm.Kind RegardsAnitaReplied by i-sells, 02-05-2019 -
DELIVERY
Delivery: You'll receive in: Cost Min Order Free Delivery 3 to 5 Days FREE £100 Standard 2 to 4 Days £4.99 - Express Courier Next day+ £9.95 Any View Full Delivery Info
FREE Delivery for orders over £100 inc VAT.
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.
