System 100 Round 100mm Intumescent Fire Sleeve 120 Mins

System 100 Round 100mm Intumescent Fire Sleeve 120 Mins

QRS CE Marked Intumescent Vent Duct Fire Sleeves prevent the spread of fire where plastic ducts penetrate fire compartment walls.

Features & Benefits:

• CE Marked*
• Tested to BSEN 1366-3: 2009
• Classified according to EN 13501-2: 2007 + A1: 2009
• Tested with Uncapped/Uncapped (U/U) duct configurations as required for ventilation ducts
• Up to 2 hour fire rating
• Suitable for masonry walls or plasterboard partitions
• Suitable for insulated and non-insulated partitions
• Suitable for use in QuelStop Fire Batt
• Can be retrofitted
• No mechanical fixings required
• Robust galvanised steel shell
• Performance unaffected by weathering (Type X Durability)

*QRS90, QRS130 and QRS110 are not currently CE Marked

Application and Installation:

The QRS CE Marked Intumescent Fire Sleeve should be placed around the ventilation duct, positioned centrally within the partition and should be flush or protrude from each face of the wall. The plasterboard should be cut to a tight fit around the QRS Fire Sleeve, and any gaps should be sealed with CE Marked Intumescent Acoustic Acrylic Sealant.

Regulations

Building Regulations impose limitations on all pipes and ducts passing through fire compartment walls and floors. QRS CE Marked Intumescent Fire Sleeves allow plastic ducts to meet the requirements of the Building Regulations. QRS Fire Sleeves have been tested according to BSEN 1366-3: 2009 where various plastic duct sizes have met insulation and integrity criteria for this standard for up to 2 hours.

Composition:

QRS CE Marked Intumescent Fire Sleeves consist of a flexible galvanised steel shell containing graphite based intumescent material.

Durability

Tested to Type X durability which means the QRS CE Marked Intumescent Fire Sleeves can be installed in conditions exposed to weathering. QRS Fire Sleeves are expected to last the lifetime of the building.