Kair Threaded Hose Connector 100mm - 4 inch (Female Spigot) Joins Flexible Hose to Round Ducting Fittings
-
DETAILS
KAIR SYSTEM 100 ROUND FEMALE THREADED HOSE CONNECTOR
Product Details:
The threaded side allows you to secure Kair PVC flexible 102mm dia ducting (Part: "DUCP0092/102/35") into place without the need for clips, and to connect to male fittings such as Kair 100mm bends, reducers, or connectors.- The smooth female 100mm spigot will fit over 100mm male fittings. Use a 100mm male connector (Part: "DUCEK28") to connect to female fittings such as 100mm Round Pipe (Part: "DUCVKC250"), or if you want to join two threaded hose connectors together.
- For permanent fixings, seal joints with silicone sealant or tape.
- Please note, we do not recommend using solvent cement with flexible hose.
- Max / Min Temperature: +60c / -5c.
Kair System 100 (SYS-100) Round Ducting is perfect for installations requiring low extraction rates such as cooker hoods and small extractor fans. There are a wide variety of Kair connectors, clips, and tapes available to provide effective connections to the Kair Rigid Round and Rectangular ducting ranges to offer you greater flexibility in completing your install. Made in the UK using high-quality material. Max / Min Temperature: +70c / -5c.
Kair System 100 ductwork is perfectly suited for ducting your bathroom or kitchen extractor fan, hydroponics, in-line extract fans, or a cooker hood. This flexible hose can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, air conditioning, positive pressure ventilators, HVAC, and Heat Recovery Systems.
Not quite the right size?
Kair Threaded Hose Connectors are available to suit the following duct sizes:
- 100mm Male Round (System 100)
- 100mm Female Round (System 100)
- 125mm Female Round (System 125)
- 150mm Female Round (System 150)
Looking for compatible ducting?
Click here for the full range of Kair 100mm Round / 110mm x 54mm Rectangular Ducting Products.
-
FEATURES
Features
- Allows you to secure flexible hose without the need for clips.
- Easily connect flexible duct runs to rigid fixings.
- The smooth female 100mm spigot will fit over 100mm male fittings.
- For permanent fixings, seal joints with silicone sealant or tape.
- Compatible with the extensive Kair SYS-100 range of fittings, outlets, and grilles.
-
TECHNICAL
Technical Specifications
Product Category Connectors Round System (mm) 100 Product Type Connector Product Group Plastic Ducting Product Variety Female Length (mm) 55 Width (mm) 114 Height (mm) 114 Socket size (mm) 100 Free Area (mm²) 8,092 Colour White Material Polypropylene Weight (Kg) 0.045 Packaged Weight (Kg) 0.044 Packaged Length (mm) 115 Packaged Width (mm) 124 Packaged Height (mm) 115 Barcode 5060272540609 Quick Search: QS161 -
REVIEWS
-
Maurice ByrneDate Added: Thursday 23 July, 2015
Exactly what I needed
-
-
Q & A
Product Questions
Questions and Answers, do you need more information about this product?
Ask a QuestionYour question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
#1Connecting DUCVKC11 to DUCVKC252Can you just confirm that this connector (smooth female side) will connect directly onto the 100mm pipe ref DUCVKC252 OR or similar or is there a requirement to install a DUCEK28 to join the two together?. OR is it more suitable to use a DUCVKC10? Just looking to connect the two. Thanks
Question by Ian, 04-04-2018Hello Ian
I can confirm that the smooth section is a male connection and fits inside straight pipe DUCVKC250Replied by i-sells, 04-04-2018#2100m connection to wall pipeThis might be what I want, but could you verify the price please. Is there a better way of connecting to a pipe through the wall where it is visible?
Question by Mr Neil Bonnaud, 17-07-2018Hi Neil,
Wow, thanks for spotting the error with that rogue price! It looks like the decimal place was missed out there, and it should all be fixed now!
This item is designed to connect to a standard size flexible hose to a 'male' fitting. Typically a 100mm pipe will be a FEMALE fitting, so you would need a threaded connector with a male end to connect to it. Luckily, we have just the part! If you search for 'DUCVKC10' in the search bar it should come up with the male version of the product.
You could also look at DUCVKC260 as an alternative option - This is a wall plate with damper which would allow you to connect to both your pipe and your flexible hose, but as this has no threads you could either use this in conjunction with DUCVKC11 to achieve a nice and secure fit, or you could use a hose clip (DUCVKC264) to secure this on.
If you have any other queries please do not hesitate to ask!
Kind regards,
MichaelReplied by i-sells, 18-07-2018 -
DELIVERY
Delivery: You'll receive in: Cost Min Order Free Delivery 3 to 5 Days FREE £100 Standard 2 to 4 Days £4.99 - Express Courier Next day+ £9.95 Any View Full Delivery Info
FREE Delivery for orders over £100 inc VAT.
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.