Kair 45 Degree Elbow Bend 100mm - 4 inch

KAIR 100MM ROUND 45 DEGREE ELBOW BEND

Product Details:

White plastic 45-degree elbow bend. This is a male fitting and the spigots at each end will fit inside Kair 100mm Round Pipe (Part: "DUCVKC250") or 102mm Flexible Hose (Part: "DUCP0092/102/35").

Rigid 45-degree bends can be used to run your ductwork around obstacles along walls and into ceilings and offer superior performance and durability over flexible alternatives.

This item is part of the Kair Ventilation System 100 Plastic Round Ducting Range (SYS-100). The Kair Round System 100 (SYS-100) ducting provides superior airflow performance compared to rectangular or flexible duct and should always be considered as a first option if space allows. This system is suitable for extractor fans and cooker hoods and is compatible with an extensive range of fittings outlets and grilles.

Kair plastic ducting is lightweight, durable and suitable for commercial and domestic use. It is perfectly suited for ducting your tumble dryer, bathroom or kitchen extractor fan, hydroponics, in-line extract fans, or a cooker hood. It can be used as a part of a long ductwork run for a variety of purposes including whole-house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems.

• Easy to install and durable, just push-fit duct and fittings together.
• For permanent fixings, seal joints with a method of your choice (Popular options include silicone sealant, solvent cement, or tape.).
• Will join any female part of the Kair System 100 range.
• Built to last out of high-quality white Polystyrene/Polypropylene plastic Material.
• Max / Min Temperature: +60c / -15c.
• Round rigid ducting provides superior airflow performance vs. comparative size rectangular or flexible duct.
• Suitable to use in compliance with Part F Building Regulations.
• Airflow performance independently tested by BSRIA or BRE.
• Static Pressure Drop in Pascals: 15 l/s = 2.10 Pa - 30 l/s = 8.20 Pa - 60 l/s = 31.40 Pa.
   

If your duct run passes through a particularly cold area, we would recommend considering using our pre-insulated ducting to avoid condensation building up within your ductwork. Click here to view our range of pre-insulated plastic ducting.
 

Alternative Materials:

Here at i-sells.co.uk, we stock a large range of galvanised products including 90 degree and 45-degree bends. We recommend our ';safe seal'; galvanised bends, which are available in a huge variety of sizes from 63mm up to 1600mm.

Click here to view our full range of galvanised safe-seal bends.

Looking for compatible products?

Compatible with the extensive Kair SYS-100 range of fittings, outlets, and grilles.

Click here to view the full range of Kair 100mm Round / 110mm x 54mm Rectangular Ducting Products.