The Multivent continuous mechanical extract ventilation range is designed for the simultaneous ventilation of separate areas in the home or as a multi-point extractor system for a wide range of commercial applications.
In the home, the system is usually located in the loft or airing cupboard with ducts taken to the bathroom, kitchen and utility room to remove water vapour at source and from WC's to remove odours. Designed to provide 0.7 of an air change based on the volume of the building, the multivent system provides adequate ventilation, even in a 'tight' dwelling. Pollutant concentrations and humidity can be controlled.
The Multivent H versions are now available with 2 control options. An integral humidity sensor that will detect any rise in humidity within the system and will boost between any 2 of the 3 speeds. A new Wire-less Controller is available for use with the Multivent H with 3-speed options offering total control of the systems.
Multivent MV250 and MV350 are guaranteed for 2 years with an extended motor guarantee to 5 years offered on the MVDC LoWatt Energy Saving model.
Multivent is ideal for a range of commercial multipoint extract applications such as WC’s, fitting rooms, and kiosks. The units can be installed at any angle and where the ambient air has a high humidity content condensate drains are provided.
Humidistat | Yes |
Product Category | MEV Units |
Product Type | MEV |
Product Group | Ventilation Fan |
Product Variety | With humidistat |
Power Min (Watts) | 25 |
Power Max (Watts) | 81 |
Decibel Rating (dB) - Low | 22.4 |
Decibel Rating (dB) - Max | 35.4 |
Weight (Kg) | 5.5 |
Economy Delivery | Not eligible for economy delivery |
Next Day Delivery | Temporarily not eligible for next day delivery |
Airflow Performance (m³/h) - Low | 175 |
Airflow Performance (m³/h) - Med | 344 |
Airflow Performance (m³/h) - High | 443 |
Quick Search: | QS16893 |
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
I have a kitchen hob extractor hood that I would like to duct to the outside. I have pre-existing ductwork, which runs through this fan. I want to know whether I can connect the kitchen extractor hood into the duckwork which runs through this unit rather than doubling up on ductwork.
Good afternoon Thomas. You would need to have a separate duct run for your kitchen extractor hood, as it will run at different air flow speeds. and likely run different sized ducting. Also, you don't want grease contaminated the ducting in the Multivent.
Is this/can it be wired to a UK plug?
Hello Max
|
Customers who bought this product also purchased |