A thermal insulated ducting pipe for use with Nuaire Ductmaster Thermal Insulated Ducting systems.
Duct and fittings should be joined using either a Nuaire 125mm Diameter One Piece Connector or using a Nuaire 125mm Internal Insert and sealant. Please refer to the Thermal Ducting Installation Instructions for details on both methods and purchase the necessary components.
Internal Dia 125mm External Dia 164mm
Ductmaster Thermal – Nuaire’s innovative range of Thermal Ducting. A quick and effective solution for ducting in unheated spaces, this new innovative product provides a complete solution.
Unlike other thermal ducting systems that fit around the PVC pipe, Nuaire’s Ductmaster is an all in one complete insulated ducting system, providing a cost-effective and quick installation.
Compliant with building regulations the lightweight material not only enables a one-person lift but also removes the time and cost of insulating the PVC pipeline.
Nuaire Thermal Ducting (NTD) is a range of ducting and ancillaries intended for installation in domestic properties.
Using Nuaire Thermal Ducting will achieve a level of leakage substantially lower than the maximum allowed for a class A duct as defined in DW/143 (Ductwork leakage testing)
Alternative Product Code | NTD-125-1M |
Product Type | Insulated Ducting |
Product Group | Plastic Ducting |
Economy Delivery | Not eligible |
Quick Search: | QS39036 |
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
Hi, I am looking at installing an MEV system in a renovation project. I would like to use a Vent-Axia Sentinel Multivent H and the Nuaire Ductmaster thermal system. Couple of questions about the Nuaire system: 1. Is it fully compatible with the Vent-Axia Sentinel? 2. Does the Nuaire system need to be clamped and supported at every join? 3. What is the outside diameter of the ducting - for external venting purposes? ie. what size hole do I need to drill? 4. Do standard 125mm extraction valves and stainless external vents fit the Nuaire system? 5. Is any condensation trap need on the exhaust run if it is going horizontally? Many thanks, Mike
Hello Michael
I have to install an extractor fan and the ducting is going through a garage and therefore has to be fireproof, what rating does your product have please?
Hello Colin
Customers who bought this product also purchased |
Ducting System | Actual dimensions (mm) | Space requirements (mm) | Airflow mm² |
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour | |||
---|---|---|---|
System 100 - Round | 100 | 106 | 7,854 |
System 100 - Rectangular | 110 x 54 | 116 x 60 | 5,940 |
For medium extraction rates or if available depth is limited up to 500m³/hour | |||
System 125 - Round | 125 | 131 | 12,272 |
System 125 - Rectangular | 150 x 70 | 156 x 76 | 10,500 |
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above | |||
Megaduct 220 - Rectangular | 220 x 90 | 227 x 97 | 17,968 |
System 204 - Rectangular | 204 x 60 | 210 x 66 | 12,240 |
System 150 - Round | 150 | 156 | 17,671 |
System 150 - Rectangular | 180 x 90 | 186 x 96 | 16,200 |
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed: | |||
System 300 - Rectangular | 308 x 29 | 314 x 35 | 8,932 |
System 225 - Rectangular | 234 x 29 | 240 x 35 | 6,786 |
System 100 Round/Rectangle | System 125 Round/Rectangle | System 150 Round/Rectangle | System 204 | System 225 |
System 220 | System 300 | |||
Actual Dimensions (mm) Space Requirements (mm) |