White Coloured Square Plastic Air Inlet / Air Outlet with Gravity Shutters
110mm x 54mm rectangular spigot on the back of the grille fits inside the Kair 110mm x 54mm Rectangular Duct Pipe (Part: "DUCVKC249").
Perfectly suited for ducting your bathroom or kitchen extractor fan, hydroponics, in-line extract fans, tumble dryer, or a cooker hood.
This item can be used as a part of a long ductwork run for a variety of purposes including whole-house ventilation, passive stack vent, positive input ventilation, air conditioning, HVAC, and Heat Recovery systems.
Kair SYS-100 plastic rigid ducting is perfect for DIY and Trade use and provides superior airflow performance and durability versus flexible duct.
Suitable to use in compliance with Part F Building Regulations.
Genuine Kair Product & covered by the Kair 100% Satisfaction Guarantee.
Alternative Sizes:
Versions with 100mm, 125mm, and 150mm round spigots are also available. Click here to view the full range of Kair Plastic Gravity Grilles.
Looking for Compatible Ducting?
Compatible with the extensive Kair SYS-100 range of fittings, outlets, and grilles.
Click here to view the full range of Kair 100mm Round / 110mm x 54mm Rectangular Ducting Products.
Please note: Depending on stock availability there may be minor differences in style, colour, specification, or design from that listed above. If you have any questions please do not hesitate to contact us.
Product Category | Grilles |
Flat System (mm) | 110x54 |
Product Type | Grille - Gravity Flap/Shutter |
Product Group | Plastic Ducting |
Length (mm) | 45 |
Width (mm) | 155 |
Height (mm) | 155 |
Socket size (mm) | 30 x 103 x 48 |
Free Area (mm²) | 5,800 |
Colour | White |
Material | Polypropylene |
Weight (Kg) | 0.085 |
Packaged Weight (Kg) | 0.083 |
Packaged Length (mm) | 55 |
Packaged Width (mm) | 155 |
Packaged Height (mm) | 155 |
Temp Max (°C) | 60 |
Temp Min (°C) | -15 |
Barcode | 5060272540692 |
Manrose (similar) | 41010 |
Polypipe / Domus (similar) | 4901 |
Pressure Loss (Pa) 15 l/s | 4.81 |
Pressure Loss (Pa) 30 l/s | 15.71 |
Pressure Loss (Pa) 60 l/s | 51.4 |
Quick Search: | QS173 |
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
I am thinking of buying the product to take the grilles out and fit them into my existing unit. Can you tell me what the dimensions of the grilles are themselves. I need grilles which around 113mm/114mm width to fit my existing unit.
Hello Nick
Customers who bought this product also purchased |
Ducting System | Actual dimensions (mm) | Space requirements (mm) | Airflow mm² |
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour | |||
---|---|---|---|
System 100 - Round | 100 | 106 | 7,854 |
System 100 - Rectangular | 110 x 54 | 116 x 60 | 5,940 |
For medium extraction rates or if available depth is limited up to 500m³/hour | |||
System 125 - Round | 125 | 131 | 12,272 |
System 125 - Rectangular | 150 x 70 | 156 x 76 | 10,500 |
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above | |||
Megaduct 220 - Rectangular | 220 x 90 | 227 x 97 | 17,968 |
System 204 - Rectangular | 204 x 60 | 210 x 66 | 12,240 |
System 150 - Round | 150 | 156 | 17,671 |
System 150 - Rectangular | 180 x 90 | 186 x 96 | 16,200 |
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed: | |||
System 300 - Rectangular | 308 x 29 | 314 x 35 | 8,932 |
System 225 - Rectangular | 234 x 29 | 240 x 35 | 6,786 |
System 100 Round/Rectangle | System 125 Round/Rectangle | System 150 Round/Rectangle | System 204 | System 225 |
System 220 | System 300 | |||
Actual Dimensions (mm) Space Requirements (mm) |