Plastic air outlet/air inlet round grille with fixed louvres.
100mm round male rear spigot - The male spigot on the back of the grille fits inside Kair 100mm round female duct pipe (Part: "DUCVKC250") or 102mm flexible hose (Part: "DUCP002/102/35").
Perfectly suited for ducting your bathroom or kitchen extractor fan, hydroponics, in-line extract fans, tumble dryer, or a cooker hood.
This item can be used as a part of a long ductwork run for a variety of purposes including whole-house ventilation, passive stack vent, positive input ventilation, air conditioning, HVAC, and Heat Recovery systems.
Kair SYS-100 plastic rigid ducting is perfect for DIY and Trade use and provides superior airflow performance and durability versus flexible duct.
Suitable to use in compliance with Part F Building Regulations.
Genuine Kair Product & covered by the Kair 100% Satisfaction Guarantee.
Looking for Compatible Ducting?
Compatible with the extensive Kair SYS-100 range of fittings, outlets, and grilles.
Click here to view the full range of Kair 100mm Round / 110mm x 54mm Rectangular Ducting Products.
Product Category | Grilles |
Round System (mm) | 100 |
Product Type | Grille - Louvre |
Product Group | Plastic Ducting |
Length (mm) | 155 |
Width (mm) | 40 |
Height (mm) | 155 |
Spigot size (mm) | 33 x 96 x 96 |
Colour | White |
Material | Polypropylene |
Weight (Kg) | 0.101 |
Packaged Weight (Kg) | 0.101 |
Packaged Length (mm) | 155 |
Packaged Width (mm) | 40 |
Packaged Height (mm) | 155 |
Temp Max (°C) | 60 |
Temp Min (°C) | -15 |
Barcode | 5060272540944 |
Xpelair (similar) | 89742AW |
Manrose (similar) | 1151 |
Polypipe / Domus (similar) | 4904 |
Pressure Loss (Pa) 15 l/s | 6 |
Pressure Loss (Pa) 30 l/s | 19.8 |
Pressure Loss (Pa) 60 l/s | 79.1 |
Quick Search: | QS197 |
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
is this product compatible with your 102mm insulated ducting - need it for a bathroom ceiling fan through a cold loft space. thanks, John
Hello John
Thank you for your question. This grille is normally fitted on the outside with rigid pipe as this is easier to go though the wall. If you require a grille to fit in the ceiling of the bathroom then this item is what is required QS4244.
Does this grill have a fly/spider screen under the louvre? If not, do any of your grills have a fly/spider screen fitted? many thanks.
Hello Philip
Thank you for your question. The product you require is QS38694 we only have a few in stock as it is a discontinued item.
Customers who bought this product also purchased |
Ducting System | Actual dimensions (mm) | Space requirements (mm) | Airflow mm² |
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour | |||
---|---|---|---|
System 100 - Round | 100 | 106 | 7,854 |
System 100 - Rectangular | 110 x 54 | 116 x 60 | 5,940 |
For medium extraction rates or if available depth is limited up to 500m³/hour | |||
System 125 - Round | 125 | 131 | 12,272 |
System 125 - Rectangular | 150 x 70 | 156 x 76 | 10,500 |
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above | |||
Megaduct 220 - Rectangular | 220 x 90 | 227 x 97 | 17,968 |
System 204 - Rectangular | 204 x 60 | 210 x 66 | 12,240 |
System 150 - Round | 150 | 156 | 17,671 |
System 150 - Rectangular | 180 x 90 | 186 x 96 | 16,200 |
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed: | |||
System 300 - Rectangular | 308 x 29 | 314 x 35 | 8,932 |
System 225 - Rectangular | 234 x 29 | 240 x 35 | 6,786 |
System 100 Round/Rectangle | System 125 Round/Rectangle | System 150 Round/Rectangle | System 204 | System 225 |
System 220 | System 300 | |||
Actual Dimensions (mm) Space Requirements (mm) |