White Plastic 90 Degree Elbow Bend - Outer Diameter 99mm - Male Spigot will fit inside Kair 100mm Round Pipe (Part: "DUCVKC250") or 102mm Flexible Hose (Part: "DUCP0092/102/35").
90-degree bends can be used to run your ductwork around obstacles along walls and into ceilings and offers superior performance and durability over flexible alternatives. Total space requirement: 136x136x103mm.
Kair plastic ducting is lightweight, durable and suitable for commercial and domestic use. It is perfectly suited for ducting your tumble dryer, bathroom or kitchen extractor fan, hydroponics, in-line extract fans, or a cooker hood. It can be used as a part of a long ductwork run for a variety of purposes including whole-house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems.
Recommended usage
We always recommend to use as few bends as possible in your duct run to reduce any loss of pressure, this also applies when connecting smaller to larger ducting.
When supplying air through a powerful fan, ensure that the ducting is not too narrow as this could lead to an increase of air noise, damage to the fan and potential vibration.
Through the use of adapters, multiple connections to all other systems are possible.
Our system 100 is commonly used in bathrooms or to branch out from larger systems to smaller rooms.
Alternative Materials:
Here at i-sells.co.uk, we stock a large range of galvanised products including 90 degree and 45-degree bends. We recommend our 'safe seal' galvanised bends, which are available in a huge variety of sizes from 63mm up to 1600mm.
Click here to view our full range of galvanised safe-seal bends.
If your duct run passes through a particularly cold area, we would recommend considering using our pre-insulated ducting to avoid condensation building up within your ductwork. Click here to view our range of pre-insulated plastic ducting.
Looking for compatible products?
Compatible with the extensive Kair SYS-100 range of fittings, outlets, and grilles.
Click here to view the full range of Kair 100mm Round / 110mm x 54mm Rectangular Ducting Products.
All of our Kair products have a full 30-day money-back guarantee. We have seen on many occasions contractors on-site that have run out of the components they need to finish the job. They then purchase items in bulk from us to finish the project on schedule. You can rest assured that if you find yourself in this situation, you can return the items that were surplus to requirement for a full refund. This would be after a quality inspection of the product has been made by our goods returned department.
Product Category | Bends |
Round System (mm) | 100 |
Product Type | Bend |
Product Group | Plastic Ducting |
Length (mm) | 130 |
Width (mm) | 100 |
Height (mm) | 130 |
Spigot size (mm) | 99 |
Colour | White |
Material | Polystyrene |
Weight (Kg) | 0.076 |
Packaged Weight (Kg) | 0.076 |
Packaged Length (mm) | 130 |
Packaged Width (mm) | 100 |
Packaged Height (mm) | 130 |
Temp Max (°C) | 60 |
Temp Min (°C) | -15 |
Barcode | 5060272541187 |
Vent Axia (similar) | 372004 |
Manrose (similar) | 44900 |
Polypipe / Domus (similar) | 490 |
Pressure Loss (Pa) 15 l/s | 5.6 |
Pressure Loss (Pa) 30 l/s | 21.1 |
Pressure Loss (Pa) 60 l/s | 80.1 |
Quick Search: | QS250 |
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
Hi Can I connect 150 mm Semi Rijid Aluminium Ducting to 150 mm Round 90 Degree Bend also can I connect a 150 Round 90 Degree Bend to 150 mm Round Plastic Ducting
Hello Stuart
Thank you for your question. Yes you can fit the semi rigid ducting to the bend and use a quick release worm clip to secure the bend to the ducting and the bend will fit into the plastic duct just seal the joint with some duct tape.
Customers who bought this product also purchased |
Ducting System | Actual dimensions (mm) | Space requirements (mm) | Airflow mm² |
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour | |||
---|---|---|---|
System 100 - Round | 100 | 106 | 7,854 |
System 100 - Rectangular | 110 x 54 | 116 x 60 | 5,940 |
For medium extraction rates or if available depth is limited up to 500m³/hour | |||
System 125 - Round | 125 | 131 | 12,272 |
System 125 - Rectangular | 150 x 70 | 156 x 76 | 10,500 |
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above | |||
Megaduct 220 - Rectangular | 220 x 90 | 227 x 97 | 17,968 |
System 204 - Rectangular | 204 x 60 | 210 x 66 | 12,240 |
System 150 - Round | 150 | 156 | 17,671 |
System 150 - Rectangular | 180 x 90 | 186 x 96 | 16,200 |
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed: | |||
System 300 - Rectangular | 308 x 29 | 314 x 35 | 8,932 |
System 225 - Rectangular | 234 x 29 | 240 x 35 | 6,786 |
System 100 Round/Rectangle | System 125 Round/Rectangle | System 150 Round/Rectangle | System 204 | System 225 |
System 220 | System 300 | |||
Actual Dimensions (mm) Space Requirements (mm) |