Straight Plastic Duct Connector fits inside rigid or flexible ducting
White Plastic Straight Ducting Connector. Male Spigot will fit inside Kair 125mm rigid pipe (Part: "DUCVKC267") or 127mm Flexible Hose (Part: "DUCP0092/127/35") and can be used to join multiple lengths of pipe together to form a long duct run.
Kair System 125 round ducting is a very versatile system and it is ideal for long ducting runs for whole-house ventilation systems. There are a wide variety of Kair connectors, clips, and tapes available to provide effective connections to the Kair Rigid Round and Rectangular ducting ranges to offer you greater flexibility in completing your install.
Kair System 125 ductwork is perfectly suited for ducting your bathroom or kitchen extractor fan, hydroponics, in-line extract fans, or a cooker hood. It can be used as a part of a long ductwork run for a variety of purposes including whole-house ventilation, passive stack vent, air conditioning, positive pressure ventilators, HVAC, and heat recovery systems.
Round rigid ducting provides superior airflow performance vs. comparative size rectangular or flexible duct. Suitable to use in compliance with Part F Building Regulations.
Genuine Kair Product & covered by the Kair 100% Satisfaction Guarantee for your peace of mind.
Not quite the right size?
Kair Round Ducting Connectors are available to suit the following duct sizes:
Looking for compatible ducting?
Click here to view the full range of Kair 125mm Round / 150mm x 70mm Rectangular Ducting Products.
Product Category | Connectors |
Round System (mm) | 125 |
Product Type | Connector |
Product Group | Plastic Ducting |
Product Variety | Without Damper |
Length (mm) | 127 |
Width (mm) | 127 |
Height (mm) | 62 |
Spigot size (mm) | 124 |
Colour | White |
Material | Polystyrene |
Weight (Kg) | 0.053 |
Packaged Weight (Kg) | 0.053 |
Packaged Length (mm) | 124 |
Packaged Width (mm) | 61 |
Packaged Height (mm) | 124 |
Temp Max (°C) | 60 |
Temp Min (°C) | -15 |
Barcode | 5060272541651 |
Vent Axia (similar) | 428633 |
Manrose (similar) | 515C |
Polypipe / Domus (similar) | 593 |
Pressure Loss (Pa) 15 l/s | 0.2 |
Pressure Loss (Pa) 30 l/s | 0.9 |
Pressure Loss (Pa) 60 l/s | 4.3 |
Quick Search: | QS272 |
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
If I applied "Solvent Cement" to the connector and a piece of pipe, is the plastic the kind that will weld together?
Our Plastic ducting is made from recycled UPVC and we would recommend the use of acrylic sealant for the joints.
Customers who bought this product also purchased |
Ducting System | Actual dimensions (mm) | Space requirements (mm) | Airflow mm² |
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour | |||
---|---|---|---|
System 100 - Round | 100 | 106 | 7,854 |
System 100 - Rectangular | 110 x 54 | 116 x 60 | 5,940 |
For medium extraction rates or if available depth is limited up to 500m³/hour | |||
System 125 - Round | 125 | 131 | 12,272 |
System 125 - Rectangular | 150 x 70 | 156 x 76 | 10,500 |
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above | |||
Megaduct 220 - Rectangular | 220 x 90 | 227 x 97 | 17,968 |
System 204 - Rectangular | 204 x 60 | 210 x 66 | 12,240 |
System 150 - Round | 150 | 156 | 17,671 |
System 150 - Rectangular | 180 x 90 | 186 x 96 | 16,200 |
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed: | |||
System 300 - Rectangular | 308 x 29 | 314 x 35 | 8,932 |
System 225 - Rectangular | 234 x 29 | 240 x 35 | 6,786 |
System 100 Round/Rectangle | System 125 Round/Rectangle | System 150 Round/Rectangle | System 204 | System 225 |
System 220 | System 300 | |||
Actual Dimensions (mm) Space Requirements (mm) |