Support bracket for System 150 (180mm x 95mm) rectangular plastic flat duct pipe. The bracket can be fixed to a ceiling, joist, or other fixed point using sealant or a screw (Not provided).
We recommend using with Kair 180mm x 95mm pipe - (Part: "DUCVKC651"). We recommend 1 clip, per 1/1.5 metre length of duct.
Kair System 150 (SYS-150) Rectangular Ducting is designed for use with medium to high capacity extraction systems and cooker hoods. It is perfect for flush fitting against ceilings and walls and can be concealed above wall units or inside ceiling voids.
Max / Min Temperature: +60c / -15c.
Perfectly suited for ducting your tumble dryer, bathroom or kitchen extractor fan, hydroponics, in-line extract fans, or a cooker hood.
This item can be used to support long ductwork runs for a variety of purposes including whole-house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems.
Not quite the right size?
Kair Ducting Support Clips comes in the following sizes:
Looking for compatible ducting?
Click here to view the full range of Kair 150mm Round / 180mm x 95mm Rectangular Ducting Products.
Product Category | Support Clips |
Flat System (mm) | 180x90 |
Product Type | Support Clip |
Product Group | Plastic Ducting |
Length (mm) | 224 |
Width (mm) | 91 |
Height (mm) | 20 |
Colour | White |
Weight (Kg) | 0.053 |
Packaged Weight (Kg) | 0.053 |
Packaged Length (mm) | 85 |
Packaged Width (mm) | 95 |
Packaged Height (mm) | 20 |
Temp Max (°C) | 60 |
Temp Min (°C) | -15 |
Barcode | 5060272542276 |
Quick Search: | QS390 |
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
Customers who bought this product also purchased |
Ducting System | Actual dimensions (mm) | Space requirements (mm) | Airflow mm² |
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour | |||
---|---|---|---|
System 100 - Round | 100 | 106 | 7,854 |
System 100 - Rectangular | 110 x 54 | 116 x 60 | 5,940 |
For medium extraction rates or if available depth is limited up to 500m³/hour | |||
System 125 - Round | 125 | 131 | 12,272 |
System 125 - Rectangular | 150 x 70 | 156 x 76 | 10,500 |
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above | |||
Megaduct 220 - Rectangular | 220 x 90 | 227 x 97 | 17,968 |
System 204 - Rectangular | 204 x 60 | 210 x 66 | 12,240 |
System 150 - Round | 150 | 156 | 17,671 |
System 150 - Rectangular | 180 x 90 | 186 x 96 | 16,200 |
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed: | |||
System 300 - Rectangular | 308 x 29 | 314 x 35 | 8,932 |
System 225 - Rectangular | 234 x 29 | 240 x 35 | 6,786 |
System 100 Round/Rectangle | System 125 Round/Rectangle | System 150 Round/Rectangle | System 204 | System 225 |
System 220 | System 300 | |||
Actual Dimensions (mm) Space Requirements (mm) |