Kair Semi-Rigid Aluminium Ducting is a perfect compromise between the strength of galvanised rigid duct and the versatility of aluminium flexible duct. This product is supplied in a compressed 102mm dia x 3000mm (3 Metre) length and can be used with extractor fans, heating / cooling systems, portable air conditioners, cooker hoods, tumble dryers, and ventilation systems.
Semi-Rigid Duct is ideal for fans installed on outside walls or in awkward locations. Perfect for ducting your Bathroom or Kitchen extractor fan, Hydroponics / In-Line Extract Fans, Tumble Dryer, Cooker Hood, or Heat Recovery Ventilation System. Connect a hose to the relevant spigot/outlet and fix in place using a metal hose clip or tape.
Whilst compressed diameter size is larger than shown on listing, once fully extended diameter will shrink to listed size.
Genuine Kair Product & covered by the Kair 100% Satisfaction Guarantee. Made in the UK. Compatible with the extensive Kair System 100 (SYS-100) range of fittings, outlets, and grilles. 3m lengths compress to less than 1m for easy storage and can be cut in sections to suit your requirements.
Commonly Bought with:
We recommend that you connect your hose to the relevant spigot/outlet and fix in place using a metal hose clip, quick release worm clip, or tape.
Alternative Products:
Not the hose you are looking for?
Looking for something longer? We stock a variety of hoses in 6 metres or 10-metre lengths - Click here for our full range of flexible hoses.
Looking for something stronger? Why not take a look at our combi hose or reinforced PVC hoses?
Decided on rigid ducting instead? We stock galvanised spiral ducting or plastic rigid pipe in a large variety of sizes.
Any Questions?
Please do not hesitate to contact us.
Product Category | Flexible Hoses |
Round System (mm) | 100 |
Product Type | Semi-rigid Aluminium Hose |
Product Group | Flexible Ducting |
Length (mm) | 3000 |
Width (mm) | 102 |
Height (mm) | 102 |
Diameter (mm) | 102 |
Socket size (mm) | 102 |
Free Area (mm²) | 7,855mm |
Colour | Silver |
Material | Aluminium |
Weight (Kg) | 0.743 |
Packaged Weight (Kg) | 0.743 |
Packaged Length (mm) | 760 |
Packaged Width (mm) | 112 |
Packaged Height (mm) | 115 |
Temp Max (°C) | 150 |
Temp Min (°C) | -30 |
Economy Delivery | Not Eligible |
Barcode | 5060272543624 |
Quick Search: | QS21 |
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
I have to replace my cooker hood extraction. I will need to use rigid plastic for most of it and this aluminium hose from the hood to the plastic. The join between the hose and plastic is going to be fiddly and inaccesable so I want to make a solid join that I can fit and forget. Something better than gaffer tape is needed here, what do you suggest?
Hello Steve
Thank you for your question.
You will require a male connector to join the two pieces of ducting together. On the rigid side use duct tape to seal the joint and on the flexible side a quick release worm clip will be required. See below for the code numbers.
QS37 Connector, QS1376
I am thinking about using thie semi-rigid aluminium hose to replace the plastic hose used for my bathroom ectracor fan. We have occasional problems with mice and they have eaten holes through it. Do you think this could help? Thanks
Hello Kath
Thank you for your question. I have spoken to the factory and we can not guarantee that the semi rigid hose would be rodent proof. A more robust product I.E. our galvanised spiral ducting maybe a better option. Product code GALSS-100
Hi All, I want to use this to extend the heater channel on a classic car, but the 102mm dia is slightly wider than I'd need. Can the ends be compressed easily? is the metal soft enough? Not found anything else compatible! Thanks
Hello Roy
Customers who bought this product also purchased |