KAIR SYSTEM 100 ROUND EQUAL 100MM Y-PIECE / SPLITTER
Y Junction / Ducting Splitter for round ventilation pipe. Can be used to duct into different areas and join different duct runs together. Male spigot will fit inside Kair 100mm Round Pipe (Part: "DUCVKC250") or 102mm Flexible Hose (Part: "DUCP0092/102/35").
This item is part of the Kair Ventilation System 100 Plastic Round Ducting Range (SYS-100). The Kair Round System 100 (SYS-100) ducting provides superior airflow performance compared to rectangular or flexible duct and should always be considered as a first option if space allows. This system is suitable for extractor fans and cooker hoods and is compatible with an extensive range of fittings outlets and grilles.
Kair plastic ducting is lightweight, durable and suitable for commercial and domestic use. It is perfectly suited for ducting your tumble dryer, bathroom or kitchen extractor fan, hydroponics, in-line extract fans, or a cooker hood. It can be used as a part of a long ductwork run for a variety of purposes including whole-house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems.
Looking for compatible ducting?
Compatible with the extensive Kair SYS-100 range of fittings, outlets, and grilles.
Click here to view the full range of Kair 100mm Round / 110mm x 54mm Rectangular Ducting Products.
Product Category | Y-Pieces |
Round System (mm) | 100 |
Product Type | Y-Piece |
Product Group | Plastic Ducting |
Height (mm) | 160 |
Diameter (mm) | 100 |
Weight (Kg) | 0.117 |
Packaged Weight (Kg) | 0.117 |
Packaged Length (mm) | 180 |
Packaged Width (mm) | 100 |
Packaged Height (mm) | 160 |
Temp Max (°C) | 60 |
Temp Min (°C) | -15 |
Barcode | 5060272545741 |
Vent Axia (similar) | 452081 |
Manrose (similar) | 44950 |
Polypipe / Domus (similar) | 499 |
Quick Search: | QS9739 |
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
Could you please tell me the angle of the two outlets are from the input please?
Hello Peter
Customers who bought this product also purchased |
Ducting System | Actual dimensions (mm) | Space requirements (mm) | Airflow mm² |
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour | |||
---|---|---|---|
System 100 - Round | 100 | 106 | 7,854 |
System 100 - Rectangular | 110 x 54 | 116 x 60 | 5,940 |
For medium extraction rates or if available depth is limited up to 500m³/hour | |||
System 125 - Round | 125 | 131 | 12,272 |
System 125 - Rectangular | 150 x 70 | 156 x 76 | 10,500 |
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above | |||
Megaduct 220 - Rectangular | 220 x 90 | 227 x 97 | 17,968 |
System 204 - Rectangular | 204 x 60 | 210 x 66 | 12,240 |
System 150 - Round | 150 | 156 | 17,671 |
System 150 - Rectangular | 180 x 90 | 186 x 96 | 16,200 |
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed: | |||
System 300 - Rectangular | 308 x 29 | 314 x 35 | 8,932 |
System 225 - Rectangular | 234 x 29 | 240 x 35 | 6,786 |
System 100 Round/Rectangle | System 125 Round/Rectangle | System 150 Round/Rectangle | System 204 | System 225 |
System 220 | System 300 | |||
Actual Dimensions (mm) Space Requirements (mm) |