SYSTEM 204 DOUBLE AIRBRICK ADAPTER
The DUCVKC5633G 204x60mm Rectangular Double Airbrick Adaptor is manufactured from (white) High Impact Polystyrene and has a minimum free area of 15,360mm².
It has a female adaptor for connection outside of the Kair System 204 duct.
The DUCVKC5633G is fully compliant with SAP Appendix Q Product Characteristics Database recommendations for duct sizes used with both extract and Mechanical Heat Recovery Systems.
DUCVKC5633G is manufactured in compliance with Domestic Plastic Ductwork Specification DW/154 and does meet UL94HB flammability standard. DUCVKC5633G has been designed for use with Kair System 204.
Product Category | Adaptors |
Flat System (mm) | 204x60 |
Product Type | Airbrick |
Product Group | Plastic Ducting |
Product Variety | 204X60mm |
Length (mm) | 110 |
Width (mm) | 208 |
Height (mm) | 130 |
Socket size (mm) | 204 |
Colour | White |
Material | Polystyrene |
Weight (Kg) | 0.197 |
Packaged Weight (Kg) | 0.197 |
Packaged Length (mm) | 110 |
Packaged Width (mm) | 208 |
Packaged Height (mm) | 130 |
Temp Max (°C) | 60 |
Temp Min (°C) | -15 |
Barcode | 5060272542580 |
Pressure Loss (Pa) 15 l/s | 0.9 |
Pressure Loss (Pa) 30 l/s | 3.3 |
Pressure Loss (Pa) 60 l/s | 8.4 |
Quick Search: | QS7850 |
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
Do you do a grille to suit this double airbrick adapter? The system 220 has a product that appears to do this in one piece (Model: [DUCVKC5733G]), but System 204 only seems to have separate airbricks which appear to sit in front of the adapter, making the whole assembly too deep. Urgent answer please.
Hello David,
The DUCVKC704 airbrick grilles will fit inside this adaptor. The grilles are designed to clip in. You will need two grilles per adaptor. Please click here to view the full range of colours.
Please give me a call if you have any questions.
Kind regards,
Michael
Are these adapters compatible with clay airbricks
Good morning Helen and thanks for getting in touch.
|
Customers who bought this product also purchased |
Ducting System | Actual dimensions (mm) | Space requirements (mm) | Airflow mm² |
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour | |||
---|---|---|---|
System 100 - Round | 100 | 106 | 7,854 |
System 100 - Rectangular | 110 x 54 | 116 x 60 | 5,940 |
For medium extraction rates or if available depth is limited up to 500m³/hour | |||
System 125 - Round | 125 | 131 | 12,272 |
System 125 - Rectangular | 150 x 70 | 156 x 76 | 10,500 |
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above | |||
Megaduct 220 - Rectangular | 220 x 90 | 227 x 97 | 17,968 |
System 204 - Rectangular | 204 x 60 | 210 x 66 | 12,240 |
System 150 - Round | 150 | 156 | 17,671 |
System 150 - Rectangular | 180 x 90 | 186 x 96 | 16,200 |
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed: | |||
System 300 - Rectangular | 308 x 29 | 314 x 35 | 8,932 |
System 225 - Rectangular | 234 x 29 | 240 x 35 | 6,786 |
System 100 Round/Rectangle | System 125 Round/Rectangle | System 150 Round/Rectangle | System 204 | System 225 |
System 220 | System 300 | |||
Actual Dimensions (mm) Space Requirements (mm) |