Kair 90 degree ducting plenum bend with round and rectangular spigots. At one end there is a rotating 150mm Round Male Spigot that fits inside Kair 150mm round duct pipe (Part: DUCVKC670 ) or flexible hose (Part: DUCP0092/152/35 ).
The other end is a female spigot and fits over Kair 204mm x 60mm Rectangular Duct Pipe (Part: DUCVKC5604 ). PVC Flexible Hose 206mm X 62mm (DUCR3M/206/62) will fit over the spigot.
Plenum bends allow you to run duct inside ceiling voids or other areas where space is restricted. A rotating spigot allows for easy adjustment.
It is easy to install just push-fit together & seal if required using a method of your choice (Popular options include Mastic Sealant Poly Cement or Tape).
Compact dimensions. Perfect for flush fitting against ceilings and walls.. Perfectly suited for ducting your Bathroom or Kitchen extractor fan, Hydroponics, In-Line Extract Fans, Tumble Dryer, or Cooker Hood. This bend can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input ventilation, air conditioning, HVAC, and Heat Recovery systems.
This listing is for a genuine Kair Product. Accept no imitations. Kair Ventilation Ltd offers a 100% Satisfaction Guarantee for your peace of mind. Kair ducting is made in the UK using high-quality plastic.
Unlike generic products, Kair products are compatible with the extensive range of fittings outlets and grilles in multiple sizes to offer you a complete solution for all of your ventilation needs.
For other sizes please use the search bar above. Kair Ducting comes in the following sizes:
100mm Round 125mm Round 150mm Round 110mm x 54mm Rectangular
150mm x 70mm Rectangular 180mm x 95mm
Rectangular 204mm x 60mm
Rectangular 220mm x 90mm
Rectangular 234mm x 29mm
Rectangular 310mm x 29mm Rectangular.
If you have any questions please do not hesitate to ask fellow purchasers via the Customer Questions & Answers system below.
Product Category | Adaptors |
Round System (mm) | 150 |
Flat System (mm) | 204x60 |
Product Type | Bend |
Product Group | Plastic Ducting |
Product Variety | 204mm x 60mm to 150mm |
Length (mm) | 240 |
Width (mm) | 210 |
Height (mm) | 85 |
Spigot size (mm) | 150 |
Socket size (mm) | 205 |
Colour | White |
Material | Polystyrene |
Weight (Kg) | 0.252 |
Packaged Weight (Kg) | 0.247 |
Packaged Length (mm) | 230 |
Packaged Width (mm) | 210 |
Packaged Height (mm) | 64 |
Temp Max (°C) | 60 |
Temp Min (°C) | -15 |
Barcode | 5060272542504 |
Vent Axia (similar) | 436626 |
Xpelair (similar) | FPP150 |
Polypipe / Domus (similar) | 641 |
Pressure Loss (Pa) 15 l/s | 1.46 |
Pressure Loss (Pa) 30 l/s | 5.85 |
Pressure Loss (Pa) 60 l/s | 23.46 |
Quick Search: | QS315 |
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
Good morning, We have a filtered hob extract system which vents into a narrow (approx 4 inch high) space above kitchen cupboards. We wish to duct the flow through an outside wall, involving a horizontal run of about 8 feet. This fitting appears ok for the point above the hob and also the ducting to the wall. Do you supply an adaptor to join the ducting to a, through the wall tube ? Best regards Roy Bamford
Hello Roy
Is the diameter measurement of 149mm internal or external?
Hello Martin
Customers who bought this product also purchased |
Ducting System | Actual dimensions (mm) | Space requirements (mm) | Airflow mm² |
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour | |||
---|---|---|---|
System 100 - Round | 100 | 106 | 7,854 |
System 100 - Rectangular | 110 x 54 | 116 x 60 | 5,940 |
For medium extraction rates or if available depth is limited up to 500m³/hour | |||
System 125 - Round | 125 | 131 | 12,272 |
System 125 - Rectangular | 150 x 70 | 156 x 76 | 10,500 |
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above | |||
Megaduct 220 - Rectangular | 220 x 90 | 227 x 97 | 17,968 |
System 204 - Rectangular | 204 x 60 | 210 x 66 | 12,240 |
System 150 - Round | 150 | 156 | 17,671 |
System 150 - Rectangular | 180 x 90 | 186 x 96 | 16,200 |
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed: | |||
System 300 - Rectangular | 308 x 29 | 314 x 35 | 8,932 |
System 225 - Rectangular | 234 x 29 | 240 x 35 | 6,786 |
System 100 Round/Rectangle | System 125 Round/Rectangle | System 150 Round/Rectangle | System 204 | System 225 |
System 220 | System 300 | |||
Actual Dimensions (mm) Space Requirements (mm) |