 | Description |
A range designed for photographic, medical, dental and veterinarian applications - used also for opticians and other specialist applications. Most darkrooms need a minimum of ten air changes per hour for comfort and efficiency. For rooms containing heat producing equipment (eg: print glazers) a higher rate of air change may be desirable. The Darkroom model has two cowls, the interior cowl being designed to give light protection. It can be installed in windows, partitions, external walls or roofs. Extended fixing rods for fixing thicknesses up to 370mm are supplied with the unit. Provision should be made for adequate air replacement through Vent-Axia non-vision grilles. For areas requiring total light exclusion, contact your local Vent-Axia Sales Office.
| Shutter |
With energy savings in mind TX models are supplied complete with an integral instantaneous automatic louvre shutter concealed behind the interior cowl. Operates on intake and extract at any angle of mounting. The shutter is electronically controlled by an actuator with a damped action giving quiet operation during instant opening and closing. The interlocking edges of the shutter blades provide maximum backdraught protection. When used with a T-Series controller, the shutter can be set open with the fan motor switched Off to provide natural ventilation without the security risk of an open window. TL models do not have a shutter. They are suitable for room to room systems and where there is a need for ventilation of specialised equipment. The TL model will also provide natural ventilation where required when the unit is switched Off. Suitable for operation in ambient temperatures from -40°C to +50°C.
| Electrical |
Suitable for running at any angle. Quiet running, enclosed. Fitted with self resetting Standard Thermal Overload Protection (S.T.O.P.). Supply voltage: 220-240V/1/50Hz (120V/1/60 Hz).
| Controllers and Sensors |
 | T-Series Controller
- Three speeds. Choice of extract/intake
- Shutter open, fan Off setting
- Sensor mode. Enables external electro mechanical switches, eg: Ecotronic, HumidiSwitch, ThermoSwitch and TimeSwitch to control the fan.
|
 | Ecotronic 130 Controller
All the features of T-Series:- - Infinitely variable speed control
- 'E' position for energy saving
- Minimum speed adjustment.
|
| | Ecotronic 400 Controller
For groups of units of any one size up to a total of 400 watts. Do not mix T-Series with Standard Range ventilating units on one controller. |
 | Ambient Response Humidity Sensor
Self programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature.Night time RH increment setback feature. |
 | Air quality sensor
Automatically reacts to the depletion of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas. |
 | Ecotronic Humidity Sensor
The Ecotronic Humidity Sensor is an adjustable set point, solid state controller. A pullcord provides manual override, indicated by lamp. Adjustable from 65% to 90%RH. Ecotronic includes a relay and can be used with T-Series controller sensor mode. |
| Performance |
Output is for the extract airflow on HIGH. 
| Dimensions (mm) |
 | Size | 6 (150mm) | 7 (190mm) | 9 (230mm) | 12 (300mm) | | A | 100 | 136 | 136 | 171 | | B | 196 | 206 | 229 | 308 | | C | 285 | 400 | 400 | 500 | | D | 220 | 258 | 302 | 378 | | E | 226 | 265 | 304 | 381 | | F | 19 | 19 | 19 | 19 | | Fixing Hole Diameter | 184 | 222 | 260 | 337 | | Weight (kg) | 4.13 | 5.33 | 6.60 | 10.05 |
| Technical Data |
| Unit size | 6 | | Type | TX6DR | TL6DR | | Stock Ref. No. | W16 12 10 | W26 12 10 | | Amps @ 240V | 0.24 | 0.21 | Extract
Performance
m³/h | Low | 200 | | Med | 240 | | High | 265 | | Watts (high) | 45 | 40 | | dB(A) (med) @ 3m | 43 | | Shutter (TX only) | Instant | | Surface Controllers | T-Series Type TSC | W36 11 19 | | Ecotronic 130 | W30 01 20 | | Ecotronic 400 | W36 23 20 | | Time Switch TTC | W36 13 10 |
| Unit size | 7 | | Type | TX7DR | TL7DR | | Stock Ref. No. | W16 22 10 | W26 22 10 | | Amps @ 240V | 0.24 | 0.21 | Extract
Performance
m³/h | Low | 330 | | Med | 415 | | High | 530 | | Watts (high) | 46 | 41 | | dB(A) (med) @ 3m | 2 | | Shutter (TX only) | Instant | | Surface Controllers | T-Series Type TSC | W36 11 19 | | Ecotronic 130 | W30 01 20 | | Ecotronic 400 | W36 23 20 | | Time Switch TTC | W36 13 10 |
| Unit size | 9 | | Type | TX9DR | TL9DR | | Stock Ref. No. | W16 32 10 | W26 32 10 | | Amps @ 240V | 0.42 | 0.39 | Extract
Performance
m³/h | Low | 455 | | Med | 630 | | High | 725 | | Watts (high) | 80 | 75 | | dB(A) (med) @ 3m | 42 | | Shutter (TX only) | Instant | | Surface Controllers | T-Series Type TSC | W36 11 19 | | Ecotronic 130 | W30 01 20 | | Ecotronic 400 | W36 23 20 | | Time Switch TTC | W36 13 10 |
| Unit size | 12 | | Type | TX12DR | TL12DR | | Stock Ref. No. | W16 42 10 | W26 42 10 | | Amps @ 240V | 0.51 | 0.48 | Extract
Performance
m³/h | Low | 870 | | Med | 1040 | | High | 1130 | | Watts (high) | 105 | 100 | | dB(A) (med) @ 3m | 42 | | Shutter (TX only) | Instant | | Surface Controllers | T-Series Type TSC | W36 11 19 | | Ecotronic 130 | W30 01 20 | | Ecotronic 400 | W36 23 20 | | Time Switch TTC | W36 13 10 |
Flush box Stock Ref. No. 40 01 44
| Typical Specification |
Supply and install a T-Series Darkroom fan as manufactured by Vent-Axia Ltd, Fleming Way, Crawley, West Sussex, RH10 9YX Telephone: 01293526062. The fan should be able to give a minimum of 10 air changes per hour, it should have two cowls to give light protection while mounted in windows partitions, external walls and roofs. The fan should be able to extract through walls up to 370mm thick by use of extended fixing rods. The fan should have a speed control pack which enables high, medium and low speed to be set to suit room size or required duty. The fan should be fully reversible and be able to be controlled by using variable speed controllers or by humidity, air quality or PIR sensors. The fan should incorporate an electronically controlled instantaneous shutter mechanism that has a facility to be in an open state without the fan running for passive ventilation. The unit should meet with Document F of the Building Regulations and be BEAB approved. The motor should be suitable to run at any angle and suitable for operation in ambient temperatures from -40°C to +50°C and should be fitted with self resetting Standard Thermal Overload Protection (S.T.O.P.). Patented Shutter Actuator System
European Patent Number EP 0177215 Patented Remote Speed Control Circuit
European Patent Number EP 0180311.
| 
All prices displayed:
