Supply and Install an ELX1003 high performance, energy-efficient centrifugal fan which has been tested and is SAP Q Eligible and suitable for ALL domestic wet rooms as supplied by Vectaire Ltd, Lincoln Road, Cressex Business Park, High Wycombe, Bucks, HP12 3RH. The fan is to be suitable for installation either into a wall or ceiling (with the appropriate accessories) and to have an air intake around the whole perimeter and have a footprint of no more than 180mm square. The fan is to be continuous running at its low speed (with a choice of two lower speeds) and be capable of being boosted to maximum speed by means of an integral pull cord or (with the cord removed) a remote switch, PIR sensor or humidistat. The fan should have specific fan power (as tested by BRE) of no higher than 0.22w/l/s in a kitchen and 0.16w/l/s in a bathroom. The fan must not exceed 2.0w power consumption at the lowest speed. The fan casing should be made of shock-proof, high-quality technopolymer, and should have an EC induction motor with maintenance-free, long-life ball bearings, and up to a 43,000-hour life. It should be protected with a thermal cut-out. The fan should be double insulated and be lPX4 splashproof protected suitable for installation into Zones I and Il. The fan is to comply with IEC 60335-2-80, LVD2006/95/CE and EMC 2OO4/108/CE European Directive against radio interference and electro-magnetic compatibility, be CE marked. The fan should have 5-year manufacturer’s warranty and be supplied with a user guide as required, and SAP Q Eligible. Only approved accessories should be used: Wall Plates – as required Wall terminations – all wall terminations must use the approved wall cowl or high rise kit.
Made to order | No |
Timer | No |
PIR | No |
Humidistat | No |
Pullcord | Yes |
Continuous Running | Yes |
SELV | No |
Product Category | Extractor Fan |
Round System (mm) | 100 |
Product Type | Centrifugal Fan |
Product Group | Ventilation Fan |
Length (mm) | 116 |
Width (mm) | 180 |
Height (mm) | 180 |
Spigot size (mm) | 99 |
Face Size (mm) | 180 x 180 |
Voltage (V) | 230 |
IP Rating | IPX4 |
Phase | 1 |
Power Min (Watts) | 1.3 |
Power Max (Watts) | 15 |
Decibel Rating (dB) - Low | 15.5 |
Decibel Rating (dB) - Max | 35 |
Colour | White |
Colour - Internal | White |
Colour - External | White |
Material | Shockproof Technopolymer |
Weight (Kg) | 1.05 |
Packaged Weight (Kg) | 1.05 |
Packaged Length (mm) | 190 |
Packaged Width (mm) | 140 |
Packaged Height (mm) | 190 |
Temp Max (°C) | 40 |
Thickness (mm) | 87 |
Barcode | 5055169701805 |
Barcode - Type | EAN |
Manufacturer Product Code | ELX1003 |
Airflow Performance (l/s) - Low | 8 |
Airflow Performance (l/s) - Med | 14 |
Airflow Performance (l/s) - High | 28 |
Airflow Performance (m³/h) - Low | 28.8 |
Airflow Performance (m³/h) - Med | 50.4 |
Airflow Performance (m³/h) - High | 100.8 |
Maximum suggested long duct run (Mtr) | 15 |
Fan Operation Modes | 2 |
SAP Appendix Q applicable | Yes |
Warranty (Years) | 5 |
Quick Search: | QS39006 |
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
5 year old Eco1003 getting noisy. Will this fan be a suitable replacement. (Using existing fixing screw holes.)
Good morning David. If it is fitted in a window, then no, but if it is fitted through a wall, then it will fit, but the screw holes may be in a slightly different position.
|
|
Customers who bought this product also purchased |