Mixed Flow Inline Duct Fan for 150mm ducting.
In Line Mixed Flow fans offer two and half times the pressure of conventional axial fans, are dimensionally more compact making them ideal for many ducted applications. The impeller blade design with guide vanes provides optimum pressure characteristics and simple connectivity and quieter more efficient running provides the complete solution.
The ACM Mixed Flow In-Line fan can operate in both horizontal and vertical positions and can be mounted to meet its optimum performance.
Motor
All motors are fitted with Standard Thermal Overload Protection. (S.T.O.P.). Designed for ambient temperatures up to +50°C.
Size 100 and 125 with shaded pole motors. Size 150, 200, 250 and 315 with capacitor start and run motors. All sizes are Class II appliances except ACM250 and ACM315 which is Class I Supply voltage 220-240V/1/50Hz.
Supply and install the ACM range of commercial In-line fans as manufactured by Vent-Axia Ltd, Fleming Way, Crawley, West Sussex, RH10 9YX, Telephone: 01293 526062.
The fan should be of the mixed flow design specifically for use with rigid and flexible ducting with energy efficiency and low sound levels in mind. The fan shall be fitted within the ducted system and isolated from the building structure by means of Anti- Vibration mountings.
The fans should be dimensionally compact saving weight and installation costs. The casing should be manufactured from galvanised sheet steel and manufacture is controlled to BS EN ISO 9001.
The fan should be fully speed controllable by using a variable speed controller.
The fan should be controlled by humidity, air quality or PIR sensor.
The fan motor should be removable by means of 2 Clip Bands for ease of maintenance.
Motors should have ball bearings greased for life to allow the fan to be installed at any angle and should have Class B insulation to allow the fan to work satisfactorily in ambient air temperatures from -5°C to +50°C and should be fitted with Standard Thermal Overload Protection (S.T.O.P.).
Timer | No |
Product Category | In-Line Fans |
Round System (mm) | 150 |
Product Type | Mixed Flow In-Line Fan |
Product Group | Ventilation Fan |
Length (mm) | 268 |
Width (mm) | 210 |
Height (mm) | 365 |
Spigot size (mm) | 147 |
IP Rating | IP44 |
Power Min (Watts) | 42 |
Power Max (Watts) | 48 |
Decibel Rating (dB) - Low | 31 |
Decibel Rating (dB) - Max | 35 |
Colour | White |
Weight (Kg) | 2.925 |
Packaged Weight (Kg) | 2.925 |
Economy Delivery | Not Eligible |
Manufacturer Product Code | 17106010 |
Vent Axia (similar) | ACM150 |
Manrose (similar) | MF150S |
Airflow Performance (l/s) - Low | 123 |
Airflow Performance (l/s) - High | 145 |
Airflow Performance (m³/h) - Low | 442 |
Airflow Performance (m³/h) - High | 522 |
Warranty (Years) | 2 |
Quick Search: | QS3093 |
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
Dear I-sells. I am looking to use this to vent a loft space. As such I will to set up power to the fan via a timer which will allow for a hour or so operation. Does a supply of power to the fan make it work or are there any sensors eg humidity / temperature which would stop the fan coming on in certain circumstances even with power supplied? I just need it yo be a simple fan which will run continuously given power. Thank you, Mark
Hello Mark
The ACM fans (Standard models only) can be used with a Electronic 1.5a Controller product code W300310. I will send you the PDF on a separate e-mail.
I would like to be able to control 2 fans with a single control switch. Is this possible and what control switch would I need? I am planning on using 2 150mm stainless stell bull nose vents with 2 fans as a kitchen extraction system.
Hello Julian
|
|
Customers who bought this product also purchased |