Biobond Stabiliser - MCS2
Biobond Stabiliser is a ready-for-use biocidal primer for ‘bonding' plaster etc. surfaces prior to re-decoration. It contains a deeply penetrating inorganic biocide designed to kill off the ‘roots' (hyphae) of the mould thereby preventing re-growth underneath freshly applied paint or paper finishes. The solution should be applied to reasonably dry surfaces to facilitate penetration of the substrate.
Instructions for use: Before application remove all loose
or flaking paint and rub down to a sound surface. Etch previously painted surfaces with e.g. glass paper to form a key. Apply neat Biobond Stabiliser by brush at a rate of 1 litre per 10 m2 and extend the treatment approximately 1 metre beyond the mould growth area. Pay particular attention to corners and junctions. On porous surfaces, once the first coat has soaked in, apply a second coat (allow to dry fully before continuing).