Kair Stainless Steel Wall Vent - 4 inch / 100mm Bull-Nose Vent with wire - SYS-100 - DUCSS101
Wall-mountable High-Quality Stainless Steel Louvred Bull-Nose outlet with fixed grille and unique styling.
Easy to fit and durable. Can be used as a stand-alone passive vent or as a termination or supply point with your Bathroom or Kitchen extractor fan, Hydroponics fan, or In-Line Extract Fan.
This grille can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive ventilation, positive input, air conditioning, HVAC, and Heat Recovery Systems.
Aesthetically pleasing modern design constructed out of Grade 304 Stainless Steel. Suitable for external or internal use in compliance with Part F Building Regulations.
Stainless Steel 18/10 100%
Wall mounted outlet with fixed grille and unique styling with natural free air circulation. Includes, screws, drip deflector and rubber seal.
For use with extractor fans, cooker hoods, tumble dryers, and all general domestic and commercial applications.
|Round System (mm)||100|
|Product Type||Wall Vent|
|Spigot size (mm)||96|
|Packaged Weight (Kg)||0.193|
|Packaged Length (mm)||150|
|Packaged Width (mm)||150|
|Packaged Height (mm)||150|
|Temp Max (°C)||60|
|Temp Min (°C)||-15|
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
Hi Looking to cover the outlet from a brewery copper which is vented to outside using 100mm flexible ducting. It boils for around an hour, and therefore generates a lot of steam. Having melted a plastic vent was hoping this would be suitable but says maximum temp,60C. Would it be damaged by higher temperatures ?
Sorry for the delay. Please see below the factories reply to your question.
We would normally suggest anoperating temperature range of -20°C to +100°C for the Stainless Steel Valves,but the actual Melt Temperature of Stainless Steel is around 1400°C.
If I can help any further please do not hesitate to contact me on 0208 463 9683
|Customers who bought this product also purchased|
|Ducting System||Actual dimensions (mm)||Space requirements (mm)||Airflow mm²|
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour
|System 100 - Round||100||106||7,854|
|System 100 - Rectangular||110 x 54||116 x 60||5,940|
For medium extraction rates or if available depth is limited up to 500m³/hour
|System 125 - Round||125||131||12,272|
|System 125 - Rectangular||150 x 70||156 x 76||10,500|
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above
|Megaduct 220 - Rectangular||220 x 90||227 x 97||17,968|
|System 204 - Rectangular||204 x 60||210 x 66||12,240|
|System 150 - Round||150||156||17,671|
|System 150 - Rectangular||180 x 90||186 x 96||16,200|
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed:
|System 300 - Rectangular||308 x 29||314 x 35||8,932|
|System 225 - Rectangular||234 x 29||240 x 35||6,786|
| System 100 |
| System 125|
| System 150|
|System 204||System 225|
|System 220||System 300|
|Actual Dimensions (mm) Space Requirements (mm)|