In a fire situation FireCuff is designed to expand inwards and crush the spigot of the fan or vent. This action closes the hole in the ceiling creating an effective barrier to smoke, flames and heat. Unlike other intumescent fire stops this FireCuff does not need any additional support and can only expand inwards.
Please note: The recommended cut aperture size for this firecuff is 190mm diameter.
Extractor fans and ventilation ducting are widely used in domestic and commercial building and are often installed in the ceiling. Ceilings are subject to fire regulations and must be fire protected in accordance with Approved Document B of the Building Regulations.
Once a hole is made in the ceiling for the installation of a thermoplastic fan or vent, the integrity of the ceiling for the installation of a thermoplastic fan or vent, the integrity of the ceiling and its ability to perform in the event of a fire is significantly reduced. To reinstate the original fire rating of the ceiling a suitable fire stop must be fitted.
The popularity of forced and controlled ventilation is increasing as it can be much more energy efficient than traditional ventilation methods. The use of centralised ventilation units and heat recovery units result in the building being subject to penetration holes through the structure, creating pathways for the passage of both fire and smoke. The ability of the fire to move all around the building via the ventilation system make it ever more important to protect all ceiling mounted fans and vents.
30 minute plasterboard / timber ceiling
Duration of effective protection - 36 minutes
Test Standard - BS476 Part 21
Test No - Chilt/IF06015
60 minute plasterboard / timber ceiling
Duration of effective protection - 72 minutes
Test Standard - BS476 Part 21
Test No - Chilt/IF06021
Other size firecuffs
|Round System (mm)||125|
|Spigot size (mm)||129|
|Packaged Weight (Kg)||0.074|
|Packaged Length (mm)||168|
|Packaged Width (mm)||35|
|Packaged Height (mm)||168|
Last Orders for delivery before Christmas
Please call us on 020 8463 9696 or place orders online by midday Thursday 20th December 2018.
Will be limited only to online queries, please allow up to 48 hours for a response.
All orders are subject to availability. Please call us on 020 8463 9696 to check availability or likely despatch date.
View full delivery dates here
SIDCUP SHOWROOM STORE (Get Directions)
Closes: 4:30pm Thirsday 20th December.
Opens: 8:00am Wednesday 2nd January 2019
|Shipping Method||Under £100*||Over £100*|
4 to 7 Days (Orders under £25 inc VAT)
4 to 7 Days (Orders over £25 inc VAT)
2 to 4 Days (Interlink or TNT)
Next Working Day Delivery+
* Usually £200+vat
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.
See the full delivery information here: Full delivery information
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
Can this product be installed around an existing tube, or does it have to be feed on the tube?
|Customers who bought this product also purchased|
|Ducting System||Actual dimensions (mm)||Space requirements (mm)||Airflow mm²|
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour
|System 100 - Round||100||106||7,854|
|System 100 - Rectangular||110 x 54||116 x 60||5,940|
For medium extraction rates or if available depth is limited up to 500m³/hour
|System 125 - Round||125||131||12,272|
|System 125 - Rectangular||150 x 70||156 x 76||10,500|
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above
|Megaduct 220 - Rectangular||220 x 90||227 x 97||17,968|
|System 204 - Rectangular||204 x 60||210 x 66||12,240|
|System 150 - Round||150||156||17,671|
|System 150 - Rectangular||180 x 90||186 x 96||16,200|
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed:
|System 300 - Rectangular||308 x 29||314 x 35||8,932|
|System 225 - Rectangular||234 x 29||240 x 35||6,786|
| System 100 |
| System 125|
| System 150|
|System 204||System 225|
|System 220||System 300|
|Actual Dimensions (mm) Space Requirements (mm)|