Kair Stainless Steel Wall Vent - 6 inch / 150mm Bull-Nose Vent with Wire - SYS-150 - DUCSS151
Wall-mountable High-Quality Stainless Steel Louvred Bull-Nose outlet with fixed grille and unique styling.
Easy to fit and durable. Can be used as a stand-alone passive vent or as a termination or supply point with your Bathroom or Kitchen extractor fan, Hydroponics fan, or In-Line Extract Fan.
This grille can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive ventilation, positive input, air conditioning, HVAC, and Heat Recovery Systems.
Aesthetically pleasing modern design constructed out of Grade 304 Stainless Steel. Suitable for external or internal use in compliance with Part F Building Regulations.
Stainless Steel 18/10 100%
Wall mounted outlet with fixed grille and unique styling with natural free air circulation. Includes screws, drip deflector and rubber seal.
For use in extractor fans, cooker hood, tumble dryer and all general domestic and commercial applications.
|Round System (mm)||150|
|Product Type||Wall Vent|
|Spigot size (mm)||145|
|Packaged Weight (Kg)||0.397|
|Packaged Length (mm)||220|
|Packaged Width (mm)||220|
|Packaged Height (mm)||180|
|Temp Max (°C)||60|
|Temp Min (°C)||-15|
Last Orders for delivery before Christmas
Please call us on 020 8463 9696 or place orders online by midday Thursday 20th December 2018.
Will be limited only to online queries, please allow up to 48 hours for a response.
All orders are subject to availability. Please call us on 020 8463 9696 to check availability or likely despatch date.
View full delivery dates here
SIDCUP SHOWROOM STORE (Get Directions)
Closes: 4:30pm Thirsday 20th December.
Opens: 8:00am Wednesday 2nd January 2019
|Shipping Method||Under £100*||Over £100*|
4 to 7 Days (Orders under £25 inc VAT)
4 to 7 Days (Orders over £25 inc VAT)
2 to 4 Days (Interlink or TNT)
Next Working Day Delivery+
* Usually £200+vat
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.
See the full delivery information here: Full delivery information
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
I'm looking to install the bull nose cover but can you confirm the wire mesh diameter ideally not more than 4mm ?
Thank you for your question. The hole size on the 150mm Bull Nose vent is 1cmx1cm
|Customers who bought this product also purchased|
|Ducting System||Actual dimensions (mm)||Space requirements (mm)||Airflow mm²|
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour
|System 100 - Round||100||106||7,854|
|System 100 - Rectangular||110 x 54||116 x 60||5,940|
For medium extraction rates or if available depth is limited up to 500m³/hour
|System 125 - Round||125||131||12,272|
|System 125 - Rectangular||150 x 70||156 x 76||10,500|
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above
|Megaduct 220 - Rectangular||220 x 90||227 x 97||17,968|
|System 204 - Rectangular||204 x 60||210 x 66||12,240|
|System 150 - Round||150||156||17,671|
|System 150 - Rectangular||180 x 90||186 x 96||16,200|
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed:
|System 300 - Rectangular||308 x 29||314 x 35||8,932|
|System 225 - Rectangular||234 x 29||240 x 35||6,786|
| System 100 |
| System 125|
| System 150|
|System 204||System 225|
|System 220||System 300|
|Actual Dimensions (mm) Space Requirements (mm)|