Safe metal ducting contains rubber seals while standard metal ducting does not.
Call us 020 8463 9696
Bathroom zones are just a way of telling which extractor fan you can install in a specific place.
* Usually £200+vat+ Order before noon for Next Working Day Delivery for items in stockExcludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.
See the full delivery information here: Full delivery information
(0) Questions | (0) Answers | Ask a Question
Tecsonic 400 is a high quality fully flexible acoustic ducting. It is ideal for use in low and medium pressure ventilation and air conditioning systems where attenuation of duct borne noise is required.
Tecsonic 400S is constructed in a similar manner to Tecsonic 400 but with the addition of an acoustically transparent interliner between the inner core and fibreglass layers. This interliner allows for a good acoustical performance yet shields the airstream from the fibreglass and prevents the possibility of fibre migration into the airstream. This feature makes Tecsonic 400S especially suitable for specialist applications e.g. Food preparation, clean rooms etc. Like Tecsonic 400 this construction still provides a highly flexible duct in which bends of 1/2 D radius can be produced.
Acoustic flexible ducting for joints or connections shall be TECSONIC 400S. It shall be manufactured with an aluminium/polyester inner core continuously perforated and wrapped with an acoustically transparent interliner. The interliner shall be covered by an overlapped fibreglass blanket with an outer jacket constructed from a reinforced aluminium fabric. The duct shall meet the time requirements of BS476 parts 6 & 7.
Tecsonic 400S is supplied, as standard, in 10 metre lengths. Each length is individually cartoned and labelled. Storage space required is kept to a minimum with a 10 metre length being compressed to 1150mm.
Fully extend ducting, then cut to exact length required using a sharp knife and pliers. Pull back fibreglass insulation and tape the inner core to the spigot. Then tape and clamp the outer jacket and inner core to the spigot.
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour
For medium extraction rates or if available depth is limited up to 500m³/hour
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed:
Delivery usually takes 2 - 4 working days. Orders over £100 are delivered free with UK Standard Deliveries
All our online orders are processed through a secure payment service using up to 256 bit encryption system.
Need help with your order?
Call us on 020 8463 9696
Further information can be found here.
i-sells.co.uk supplies our wide range of products daily throughout the UK -
export enquiries are welcome. I-sells for all your ducting, ventilation, air conditioning and damp control needs
Prices include VAT @ 20% where applicable for
trade and export purposes
Express delivery options available on orders placed before noon for in stock items.
2 St John's Parade, Sidcup High Street, Sidcup, Kent, DA14 6ES Get Directions
Contact us: firstname.lastname@example.org Telephone: 0208 463 9696 (international +44 20 8463 9696) Vat Registration number: GB788304203