iCONstant dMEV fans can be used in any of the wet rooms. The required trickle rate is selected by the installer when the fan is fitted – this is dependent on the application – for toilets select 6l/sec, en-suites, bathrooms and utility rooms select 8 l/sec and kitchens it is 13 l/sec. The boost will be the next speed level up with a maximum of 20 l/sec.
There are two iCONstant models available. On the Timer version, the boost speed is set to run on for between 15, 30 or 45 minutes. With the Humidity Timer version, the intelligent humidity sensor will activate the boost speed when a set point is reached - and this can be adjusted between 60% and 90%. When the set point is reached after the boost speed kicks in, the fan will revert to the trickle speed once again.
Main Features
Timer | Yes |
Humidistat | YES |
Pullcord | YES |
Continuous Running | YES |
Smart Control | YES |
SELV | YES |
Product Category | Extractor Fan |
Round System (mm) | 100 |
Product Type | Axial Fan |
Product Group | Ventilation Fan |
Length (mm) | 120 |
Width (mm) | 197 |
Height (mm) | 197 |
Spigot size (mm) | 100 |
Voltage (V) | 100/240V |
IP Rating | IPX5 |
Amps @ 240V | 3 |
Power Min (Watts) | 1.7 |
Power Max (Watts) | 2.9 |
Decibel Rating (dB) - Low | 10 |
Decibel Rating (dB) - Max | 38 |
Colour | White |
Weight (Kg) | 0.55 |
Barcode | 5019009318295 |
Barcode - Type | EAN |
Manufacturer Product Code | 72687118 |
Airflow Performance (l/s) - Low | 6 |
Airflow Performance (l/s) - Med | 13 |
Airflow Performance (l/s) - High | 20 |
Airflow Performance (m³/h) - Low | 22 |
Airflow Performance (m³/h) - Med | 47 |
Airflow Performance (m³/h) - High | 72 |
SAP Appendix Q applicable | YES |
Warranty (Years) | 3 |
Quick Search: | QS38726 |
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
Hello, When I try to change the cover of this fan, the blades sometimes get stuck either half-open or half closed which means I can't change the cover. How do I fix this?
|
Customers who bought this product also purchased |