Our commercial aluminium flexible ducting range - also known as Tecflex 400 - is ideal for use in high, medium and low pressure air conditioning and ventilation systems where a quality uninsulated aluminium flexible ducting is required.
Tecflex 400 is manufactured from aluminium & polyester film in a multi-ply format to provide a tough yet highly flexible, puncture resistant, ducting. The fabric is supported by an encapsulated high tensile steel wire helix at 35mm pitch. This construction results in a ‘sag free’ yet ultra flexible duct in which smooth bends of less than 1/2 D radius can be produced. Encapsulation of the wire helix between the inner and outer duct wall provides an exceptionally smooth inner wall resulting in excellent friction loss characteristics and reduced levels of noise generation.
Un-insulated flexible ducting for joints or connections shall be TECFLEX 400. It shall be manufactured from aluminium & polyester film to form a puncture resistant multi-ply laminate supported by an encapsulated high tensile steel wire helix. The duct shall meet the requirements of BS476 parts 6, 7 and 20.
Each 10 metre length of duct is individually cartoned & labelled. This production and packing configuration ensures that wastage through scrap is kept to a minimum and dramatically reduces the chance of damage in transit or on site. Storage space required is also kept to a minimum with a 10 metre length being compressed to 590mm.
Fully extend ducting, then cut to exact length required using a sharp knife and pliers. We recommend that joints be sealed on medium and high pressure applications using Tecseal Sealant. To fix Tecflex 400 to spigots we recommend the Tecfix Banding or our Quick Release Worm Clip system.
We also supply Tecsonic Acoustic Flexible Ducting in three grades to meet virtually any application. Comprehensive literature is available.
|Alternative Product Code||GALSRFG1-80|
|Made to order||No|
|Product Category||Flexible Hoses|
|Round System (mm)||80|
|Product Type||Flexible Aluminium Hose|
|Product Group||Flexible Ducting|
|Diameter - Inner (mm)||80|
|Material||Aluminium & Polyester|
|Packaged Weight (Kg)||0.82|
|Packaged Length (mm)||900|
|Packaged Width (mm)||92|
|Packaged Height (mm)||95|
|Temp Max (°C)||120|
|Temp Min (°C)||-30|
|Economy Delivery||Not Eligible|
|Manufacturer Product Code||TF400080|
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
good morning .Has our order TEES281058 REF:339315 been delivered yet ? .Thank you Andy Gatenby
Hi, Could you advise the outside diameter of this ducting. I need it to go down the inside of some stud walling. Thanks
|Customers who bought this product also purchased|