CONDENSATION TRAP WITH OVERFLOW - 100MM Condensation overflow outlet suitable for standard 25mm plastic pipe
CONDENSATION TRAP WITH OVERFLOW - 100MM
Condensation overflow outlet suitable for standard 25mm plastic pipe
|Round System (mm)||100|
|Product Type||Condensation Trap|
|Socket size (mm)||110|
|Packaged Weight (Kg)||0.19|
|Packaged Length (mm)||105|
|Packaged Width (mm)||115|
|Packaged Height (mm)||140|
|Temp Max (°C)||60|
|Temp Min (°C)||-15|
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
Is this product suitable for 100mm plastic ducting and is it a vertical fit with a water trap that leads to the overflow pipe.Does the 100mm pipe fit inside this trap. Do you supply an overflow pipe or can you reccomend one?. Thanks - Mike
Thank you for your question. Yes this product will fit vertical into 100mm plastic ducting. There is a lip inside the trap that leads to the overflow outlet which is suitable for standard 25mm plastic pipe.
I will be using 100mm insulated ducting for this job and there is no insulated version of the trap. What would you recommend for insulation for this section.
Thank you for your question. The condensation traps do not come insulated as this is not required. Also rigid insulated hose is used with this item not flexible as there is a lip in the condensation trap that the pipe sits in to.
If you require any further assistance please do not hesitate to contact me on 0208 463 9683
Can this trap be mounted horizontally
Thank you for your question. The condensation trap can not be fitted horizontally only vertically. If condensation collects in the duct run it will fall into the rim in the trap and drain out via the overflow if fitted horizontally the water would have no where to go. If I can help any further please do not hesitate to contact me.
Hello I intend to use insulated flexible ducting. I understand that this trap cannot be used with flexible ducting. So would it work if I inserted a rigid plastic pipe between the flexible ducting and the condensation unit. If this would not work then would semi rigid flexible ducting work as an alternative? Thanks.
|Customers who bought this product also purchased|
|Ducting System||Actual dimensions (mm)||Space requirements (mm)||Airflow mm²|
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour
|System 100 - Round||100||106||7,854|
|System 100 - Rectangular||110 x 54||116 x 60||5,940|
For medium extraction rates or if available depth is limited up to 500m³/hour
|System 125 - Round||125||131||12,272|
|System 125 - Rectangular||150 x 70||156 x 76||10,500|
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above
|Megaduct 220 - Rectangular||220 x 90||227 x 97||17,968|
|System 204 - Rectangular||204 x 60||210 x 66||12,240|
|System 150 - Round||150||156||17,671|
|System 150 - Rectangular||180 x 90||186 x 96||16,200|
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed:
|System 300 - Rectangular||308 x 29||314 x 35||8,932|
|System 225 - Rectangular||234 x 29||240 x 35||6,786|
| System 100 |
| System 125|
| System 150|
|System 204||System 225|
|System 220||System 300|
|Actual Dimensions (mm) Space Requirements (mm)|