This wall outlet is designed for use on exterior walls. The outlet features an outer cowl to act as a shield against wind and rain, and is perfect for use on walls that experience moderate to extreme weather conditions.
The outlet also features a gravity damper flap that is concealed behind the cowl. This will open and close depending on whether your fan unit is in operation.
The outlet is designed to be surface mounted on a wall.
The outlet features a male spigot on the back, which is designed for use with the Kair System 150 Round Ducting Range.
|Round System (mm)||150|
|Product Type||Wall Vent|
|Free Area (mm≤)||16500|
|Packaged Weight (Kg)||0.255|
|Packaged Length (mm)||170|
|Packaged Width (mm)||200|
|Packaged Height (mm)||170|
|Barcode - Type||EAN|
|Manufacturer Product Code||6902W|
|Pressure Loss (Pa) 15 l/s||5.3|
|Pressure Loss (Pa) 30 l/s||8|
|Pressure Loss (Pa) 60 l/s||14.5|
Last Orders for delivery before Christmas
Please call us on 020 8463 9696 or place orders online by midday Thursday 20th December 2018.
Will be limited only to online queries, please allow up to 48 hours for a response.
All orders are subject to availability. Please call us on 020 8463 9696 to check availability or likely despatch date.
View full delivery dates here
SIDCUP SHOWROOM STORE (Get Directions)
Closes: 4:30pm Thirsday 20th December.
Opens: 8:00am Wednesday 2nd January 2019
|Shipping Method||Under £100*||Over £100*|
4 to 7 Days (Orders under £25 inc VAT)
4 to 7 Days (Orders over £25 inc VAT)
2 to 4 Days (Interlink or TNT)
Next Working Day Delivery+
* Usually £200+vat
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.
See the full delivery information here: Full delivery information
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
If mounted horizontal does the flap close?
The outlet is designed to be mounted on a wall so that the flap opens outwards. The flap will open as air flows through the ducting in the direction of the outlet. When there is no airflow, the damper will close due to gravity.
Hello, 1) Will this item made by Domus (Polypipe) be compatible with the 150mm round pipe made by Kair and be a good fit? 2) If so does it fit internally or externally to the 150mm round pipe? 3) Do Kair make a similar cowled wall outlet with damper? Thank you
Hi - can you tell me how I would connect semi rigid aluminium ducting (duca3000sr/150) to this outlet? will it just push over, or does it need some fixings? thanks. I am unable to access from the inside wall , if that makes any difference...
|Customers who bought this product also purchased|
|Ducting System||Actual dimensions (mm)||Space requirements (mm)||Airflow mm²|
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour
|System 100 - Round||100||106||7,854|
|System 100 - Rectangular||110 x 54||116 x 60||5,940|
For medium extraction rates or if available depth is limited up to 500m³/hour
|System 125 - Round||125||131||12,272|
|System 125 - Rectangular||150 x 70||156 x 76||10,500|
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above
|Megaduct 220 - Rectangular||220 x 90||227 x 97||17,968|
|System 204 - Rectangular||204 x 60||210 x 66||12,240|
|System 150 - Round||150||156||17,671|
|System 150 - Rectangular||180 x 90||186 x 96||16,200|
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed:
|System 300 - Rectangular||308 x 29||314 x 35||8,932|
|System 225 - Rectangular||234 x 29||240 x 35||6,786|
| System 100 |
| System 125|
| System 150|
|System 204||System 225|
|System 220||System 300|
|Actual Dimensions (mm) Space Requirements (mm)|