Kair Aluminium Flexible Round Ducting Hose 152mm dia x 10000mm (10 Metre Length) for use with extractor fans, cooling systems, cooker hoods, and tumble dryers.
This is a light and very flexible hose Made in the UK using a 5 layer laminate of aluminium/polyester. It is a versatile product which can be used for low and medium pressure heating, ventilation, cooling, and exhaust systems.
We recommend that you connect the hose to the relevant spigot / outlet and fix in place using a metal hose clip.
Perfectly suited for ducting your Bathroom or Kitchen extractor fan, Hydroponics, In-Line Extract Fans, Tumble Dryer, or Cooker Hood. This flexible hose can be used as a part of a long ductwork run for a variety of purposes including whole-house ventilation, passive stack vent, air conditioning, positive pressure ventilators, HVAC, and Heat Recovery Systems.
Genuine Kair Product & covered by the Kair 100% Satisfaction Guarantee. Made in the UK.
Compatible with the extensive Kair System 150 (SYS-150) range of fittings, outlets, and grilles.
Not the hose you are looking for? Click here for our full range
Product Category | Flexible Hoses |
Round System (mm) | 150 |
Product Type | Flexible Aluminium Hose |
Product Group | Flexible Ducting |
Length (mm) | 10000 |
Width (mm) | 152 |
Height (mm) | 152 |
Diameter (mm) | 152 |
Free Area (mm²) | 18,148mm |
Colour | Silver |
Material | Aluminium |
Weight (Kg) | 0.112 |
Packaged Weight (Kg) | 1.132 |
Packaged Length (mm) | 900 |
Packaged Width (mm) | 162 |
Packaged Height (mm) | 170 |
Temp Max (°C) | 150 |
Temp Min (°C) | -30 |
Barcode | 5060272543914 |
Quick Search: | QS7 |
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
The ducting will come through the ceiling under the edge of a beam 3.5 inches thick and 3 inches wide. Will the ducting bend sufficiently to avoid the beam.
Hello Jim
Thank you for your question. The Bending radius on this item is: 0.54 x D. We also do a semi rigid pipe (QS25) with the bending radius of 1/2 D radius. With flexible ducting you have to make sure that it is pulled very taut where as the semi rigid pipe you can manipulate it into an S shape or an 90degree bend.
If I can help any further please do not hesitate to contact me on 0208 463 9683
Kind Regards
Anita
Customers who bought this product also purchased |