The Zest Iris Damper is an ideal airflow regulator and measuring device for circular ducts. Accurate control, smooth and quiet air flow and reliable measuring results are achieved by the special iris construction. An easily readable scale assists quick and simple adjustment with a standard 13mm spanner. In the fully open position, the Zest Iris Damper provides 100% free area with no control mechanism in the airstream allowing easy and effective cleaning of the ductwork system.
The reducing orifice arrangement maintains a uniform airflow over the cross-section of the duct. Closure of the iris produces an accurate throttling of air volume with an even airflow pattern, resulting in low noise levels.
The Iris Damper can be used for measuring airflow rates by means of the orifice plate principle. The accurate control mechanism guarantees exact opening dimensions corresponding to the adjustment scale. Each damper is provided with manometer connections for measuring the differential pressure which then can be directly used to determine the airflow from the measurement scale on the damper casing. The result of the regulation is thus immediately available and any subsequent checks can be carried out very quickly. Each damper is calibrated individually giving accurate measurement results, the method error being as low as +5% dependent on mounting position within the ventilation system (see mounting distances).
The Zest Iris Duct Damper has a ‘through the case’ airtightness which meets the requirements of the Eurovent Class C.
The Zest Iris Duct Damper is suitable for continuous use from -10ºC up to +80ºC (if there is moisture in the air the damper may freeze but will not be damaged in this condition unless operated whilst frozen).
For the best results, the Zest Iris Damper should be installed in straight runs of ductwork. The damper may be fixed to ducting with rivets or self-tapping screws. We recommend joints are sealed with Tectape XT or Tecseal sealant to ensure an airtight connection. Flexible ducting may be fixed to the damper using Tecfix banding or clips.
The Zest Iris Damper is available in a comprehensive range of sizes from 80mm to 500mm.
The Zest Iris Damper is manufactured from hot-dipped galvanised steel sheet and equipped with an adjustment scale and measuring connections. The tamper-proof control knob is adjusted with the spanner provided (the 80mm dia. has a lockable lever). Spigots are fitted as standard with rubber gaskets.
|Made to order||No|
|Round System (mm)||100|
|Product Group||Metal Ducting|
|Diameter - Outer (mm)||99|
|Spigot size (mm)||99|
|Packaged Weight (Kg)||0.5|
|Temp Max (°C)||80|
|Temp Min (°C)||-10|
|Manufacturer Product Code||231637|
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
Q1 Is this damper airtight when closed? Q2 Can you supply a matching actuator (motor open & spring closed) for this damper?
|Customers who bought this product also purchased|