These are great products available at even better i-sells.co.uk prices!
These powerful in-duct mounted mixed flow fans have been designed to produce higher working pressures for applications that require high air flows, with low relative noise.
Please note: As of January 2017 the manufacturer has changed the specification of this unit. The unit now has three speed settings. i-sells.co.uk always supplies brand new stock ordered directly from the manufacturer so you will always receive the latest model
|Round System (mm)||100|
|Product Type||In-Line Fans|
|Spigot size (mm)||98|
|Power Min (Watts)||20|
|Power Max (Watts)||25|
|Packaged Weight (Kg)||1.975|
|Packaged Length (mm)||300|
|Packaged Width (mm)||195|
|Packaged Height (mm)||243|
|Temp Max (°C)||40|
|Temp Min (°C)||40|
|Barcode - Type||GTIN|
|Manufacturer Product Code||MF100S|
|Vent Axia (similar)||ACM100|
|Airflow Performance (l/s) - Low||50|
|Airflow Performance (l/s) - Med||60|
|Airflow Performance (l/s) - High||68|
|Airflow Performance (m³/h) - Low||180|
|Airflow Performance (m³/h) - Med||216|
|Airflow Performance (m³/h) - High||245|
Last Orders for delivery before Christmas
Please call us on 020 8463 9696 or place orders online by midday Thursday 20th December 2018.
Will be limited only to online queries, please allow up to 48 hours for a response.
All orders are subject to availability. Please call us on 020 8463 9696 to check availability or likely despatch date.
View full delivery dates here
SIDCUP SHOWROOM STORE (Get Directions)
Closes: 4:30pm Thirsday 20th December.
Opens: 8:00am Wednesday 2nd January 2019
|Shipping Method||Under £100*||Over £100*|
4 to 7 Days (Orders under £25 inc VAT)
4 to 7 Days (Orders over £25 inc VAT)
2 to 4 Days (Interlink or TNT)
Next Working Day Delivery+
* Usually £200+vat
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.
See the full delivery information here: Full delivery information
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
We have a wood burning stove with a metal pipe flue inside a concrete chimney with a clean air gap between the flue and the chimney. This space will heat up. There is a ventilation gap at the bottom and a hot air duct near the top. We need a fan at the ventilation gap to push cool air into the chimney to heat up and duct into other rooms. We are investigating this Manrose MF100S as a possibility for this purpose. Please advise whether it is appropriate or if not, whether you have other products that might be more suitable. Many thanks
Thank you for your question. Would you be able to advise what the temp rating will be as the MF100s only has a operating temp of 40degree c. If this is any higher I will have to source one for you. You can contact me on 0208 463 9683.
I would like to replace a MIXflo MF-100S fan and i was wondering if this unit is compatible as it looks slightly different. I would prefer not to have to replace the wall fittings.
This unit is a Manrose MF100S Mixed Flow Fan. I am not aware of any recent design changes to the Manrose MF100S that would make this unit different from one previously purchased. Can you confirm what it is that looks different between this unit and the one that you currently have in position?
With kind regards,
Hi, can this fan be installed in a ceiling void which is just deep enough to fit it. Thanks Alex
The technical datasheet for this product which shows the full dimensions of the product can be found here and the installation instructions can be found here.
I would recommend that you consider the space requirements not of just the unit but also the working space that you will require to actually fit the unit and the ducting.
Please do not hesitate to contact me if you have any further queries.
How do I prevent condensation collecting in the bottom of the fan housing which makes the fan blade sound as if it has come loose from the shaft, the unit is located in the loft space, has a shuttered external grill mounted 16 inches lower than the fan and the bathroom extract grill is 16 inches lower on the suction side and shows no signs of dripping condensate. the unit is a Manrose MF100S as the product illustrated
Thank you for your question. We do a condensation trap product code QS290. This is fitted in a horizontal position.
Hi, I'm looking for extractor hor my bathroom.Bathroom size is W-2.6m,L-2.9,H-2.7 the bathroom don't have a windows.I have installed a 125mm duct pipe wich is 1 meter long to outside wall.I'm looking for silent and with the timer extractor.Can you recommend wich one to buy.Thank you
Thank you for your questions. There are two fans that will do you application.
Product codes. QS38794 & QS17114.
What is the maximum length of ducting this fan can handle?
Thank you for your question. This fan can do an 8meter straight run or 6meters with two bends.
Can i use this product as a combustion air vent installed in my actual wood burning open fireplace?
Thank you for your question. Please see below Manrose's telephone number to give their technical department a call as they will be able to advise if you can use this fan for your application as the Maximum Operating Temperature is 40degree c.
This extractor model can be used with en-suite timer delay switch operation.
Thank you for your question. This fan can be used with a delay switch as long as it has a 240v supply and does not exceed 200watts. Get your electrician to double check
My internal bathroom measures 2.0m x 1.7m x 2.4m. Would this fan be suitable for a small bathroom like this?
Thank you for your question.Please could you advise how long your duct run would be as this fan does 8mtrs straight and 6mtrs with two bends incurred.
Can I mount the fan at any angle between flat and vertical. Just to stop condensate collecting in the depression around the fan blades. A slight tilt 45 degrees would allow it to run out and down ducting. But I don't know how this tilt would effect the bearings and motor....
Hi, Is the MF100s designed to be used as a continuos 24 hour run fan? Thanks
what is the difference between MF100T &MF100S?
Hi I've got a dryer where the run I believe is approx 2m and comes out of the roof with one bend. However, the dryer is not working at its optimal as the airflow to get the hot air up and out is poor. Would this duct fan help with ensuring the air quickly dissipates into the air outside?
is this fan ok to exctract steam from cooker verticaly
Thank you for your question. Yes this fan can be mounted vertically. If I can help any further please do not hesitate to contact me on 0208 463 9683
Could you please provide me with the fan flow curve for this product?
Thank you for your question. The flow rates etc can be found on the PDF on our website for this product. If you have any problems please do not hesitate to contact me
|Customers who bought this product also purchased|