Vent Axia Lo Carbon Solo Plus P (427481) Centrifugal Fan With Pullcord

VENT AXIA SOLO PLUS LO-CARBON CENTRIFUGAL FAN WITH PULLCORD (427481)

This Model:

 
SOLO PLUS P

• Flush or surface mountable.
• Pullcord Operated 2 speed fan.
• Constant trickle option.
• Adjustable boost.
• In-Built Lo-Carbon Controller

The VA Solo Plus Range:

Looking for a SELV model? Click here!

More Information on the Range:

The Lo-Carbon Solo Plus range from Vent-Axia has been specially designed for through the wall and ducted applications, suitable for internal bathrooms, toilets and other small rooms. Finished in white, the Lo-Carbon Solo Plus can be flush or surface mounted, with a 2 position 100mm circular spigot for rear entry or connecting to a vertical ducting system. The powerful centrifugal impeller allows installations using 100mm ducting in straight runs, whilst still achieving 15l/s as required by Building Regulations Approved Document F.

Continuous running products, such as the Lo-Carbon Solo Plus, installed in all wet areas of a dwelling are classed as a whole-house ventilation system and therefore only need to move the amount of air as outlined in table 5.1a and 5.1b of Building Regulations Approved Document F.

The Lo-Carbon Solo Plus has an adjustable boost speed which is set at installation variable between a wall or duct setting for boost/override operation to meet Building Regulations thus ensuring minimum energy usage and low sound levels. All models have an optional speed for constant trickle ventilation (12l/s), selectable at installation. Depending on the model, the fan will switch from trickle (if selected) to boost via the pullcord/light switch/humidity sensor/PIR.

All models can be wall, panel or ceiling mounted and can be connected to either circular, rectangular or Vent-Axia’s flat ducting. Enclosure of the electrical components is manufactured from flame retardant grade material.

Do you need a wall kit? - Click here!