Manrose MF100S Mixflo Fan - 100mm - Three Speed Standard Model Inline Duct Fan
-
DETAILS
MANROSE MF100S MIXFLO FAN - 100MM - Three Speed Standard Model inline duct fan
These are great products available at even better i-sells.co.uk prices!
This powerful in-duct mounted mixed flow fan has been designed to produce higher working pressures for applications that require high air flows, with low relative noise.Please note: As of January 2017 the manufacturer has changed the specification of this unit. The unit now has three-speed settings. i-sells.co.uk always supplies brand new stock ordered directly from the manufacturer so you will always receive the latest model
Mixflo fans can be mounted in a variety of applications as shown and are suitable for use with either rigid or flexible ducting.
The Manrose MF100S specially designed fan assembly allows easy installation and maintenance. The inline duct is easily installed or removed for maintenance from rigid or flexible ducting.
- Brand New 2017 Three Speed Model
- High-quality ball bearing, long-life motors, continuously rated
- Warranted for a minimum of 30,000 hours or 3 years.
- High air flows are achieved through a flexible duct
- Compact overall dimensions
- 3-speed fan settings for 100mm/4" models - selected via internal dip switch
- Double Insulation - no earth required
- Fully Building Code compliant
- Fully BEAB approved rated to IPX4.
- Easy installation
- Easy maintenance
- Can be mounted vertically
Specification - High
Air Extraction : 245m3/hr
Air Extraction L/s : 68 L/s
Noise : 24dB(A)
Watts: 25W
Specification - Low
Air Extraction : 180m3/hr
Air Extraction L/s : 50 L/s
Noise : 20dB(A)
Watts: 20W
Optional Control options:
- Manrose MET Controller - On / Off - Speed Control
- Manrose 1361 Humidistat & Time Controller
- Manrose 1362 PIR Sensor
Alternative fans:
- Manrose MF100T - 100mm inline fan with timer
- Manrose MF125T - 125mm inline fan with timer
- Manrose MF150T - 150mm inline fan with timer
-
FEATURES
Features
- Warranted for a minimum of 30,000 hours or 3 years.
- High quality ball bearing, long life motors, continuously rated
- Easy installation, Easy maintenance
- 3-speed fan settings for 100mm/4" models - selected via internal dip switch
- Perfect for bathrooms, kitchens, hydroponics, Grow rooms
-
TECHNICAL
Technical Specifications
Timer No PIR Yes Humidistat No Product Category In-Line Fans Round System (mm) 100 Product Type Mixed Flow In-Line Fan Product Group Ventilation Fan Length (mm) 300 Width (mm) 195 Height (mm) 243 Diameter (mm) 100 Spigot size (mm) 98 IP Rating IPX4 Power Min (Watts) 20 Power Max (Watts) 25 Colour Black Weight (Kg) 1.975 Packaged Weight (Kg) 1.975 Packaged Length (mm) 300 Packaged Width (mm) 195 Packaged Height (mm) 243 Temp Max (°C) 40 Temp Min (°C) 40 Barcode 5020953554332 Barcode - Type GTIN Manufacturer Product Code MF100S Vent Axia (similar) ACM100 Manrose (similar) MF100S Airflow Performance (l/s) - Low 50 Airflow Performance (l/s) - Med 60 Airflow Performance (l/s) - High 68 Airflow Performance (m³/h) - Low 180 Airflow Performance (m³/h) - Med 216 Airflow Performance (m³/h) - High 245 Quick Search: QS9653 -
REVIEWS
-
Terry Mosley
5 / 5 stars
Date Added: Thursday 11 January, 2018
no issues good fitted and running -
Alex Cowie
4 / 5 stars
Date Added: Wednesday 16 November, 2016
Good fan but quite noisy -
5 / 5 stars
Date Added: Monday 29 August, 2016
Before fan bathroom was a steam room, water trickling down walls, full on fog, like morning dew over everything, now with this fan ,,,,, nothing,,,!!!!! Mirror even clear......top drawer product, quiet but did put in rubber washers just to be sure no vibrations,, not a peep out of motor,,,,, -
Gus Macleod 4 / 5 stars
Date Added: Sunday 10 April, 2016
Great delivery time, product perfect for my needs. -
Jim Crighton 5 / 5 stars
Date Added: Thursday 10 March, 2016
Very prompt delivery at a good price -
Robin Fisher 5 / 5 stars
Date Added: Wednesday 02 March, 2016
A sturdy quality fan. Quiet and easy to install.Only live and neutral wires to connect. A fairly large fan so check dimensions will fit your installation space. Speed choice achieved by connecting the neutral wire to one of two terminals. -
Geoffrey Wood 5 / 5 stars
Date Added: Friday 26 February, 2016
Delivered promptly, well packaged and at a competitive price -
Nigel Bradley 5 / 5 stars
Date Added: Sunday 17 January, 2016
Easy to fit and service, literally remove a couple of screws, the fan can be removed from the base for easy installation, the end panels/funnels remove so it's easy to then separately wire up the fan, fit tubing to the end panels, screw down the base, put it all back together, tighten the two screws and job done. I mounted it using tap washers either side of the base plate to reduce vibrations, not sure if that was necessary but seemed a good idea. Replaced a 21 year old fan, clearly fans have progressed, this is much quieter and shifts a lot more air (from my paper over the fan grill test). But then I chose this fan specifically because it has low noise (dB) and high throughout for reasonable electric power cost. Using the higher speed setting, it is only noticeably audible in the bathroom, but then it sits on a loft board, right above the bathroom, and most of the noise comes from the vent. In the bedrooms, if you listen carefully, there is a slight hum, but nothing more. That's good [Read More..] -
James Shaw 5 / 5 stars
Date Added: Tuesday 10 November, 2015
Fantastic product. I already had one I'm my own home and my parents needed two new extractor fans but unfortunately they were opposite ends of the house so brought two more of these, very powerful yet very quiet and soo easy to install -
Alison Brown 4 / 5 stars
Date Added: Tuesday 27 October, 2015
Delivered really promptly, fitted now but not tested yet so unable to comment on capability. That said I see no reason why it shouldn't do the job nicely. Easy to install.
-
-
Q & A
Product Questions
Questions and Answers, do you need more information about this product?
Ask a QuestionYour question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
#2Whether appropriate?We have a wood burning stove with a metal pipe flue inside a concrete chimney with a clean air gap between the flue and the chimney. This space will heat up. There is a ventilation gap at the bottom and a hot air duct near the top. We need a fan at the ventilation gap to push cool air into the chimney to heat up and duct into other rooms. We are investigating this Manrose MF100S as a possibility for this purpose. Please advise whether it is appropriate or if not, whether you have other products that might be more suitable. Many thanks
Question by Dave Hodge, 11-09-2015Hello Dave
Thank you for your question. Would you be able to advise what the temp rating will be as the MF100s only has a operating temp of 40degree c. If this is any higher I will have to source one for you. You can contact me on 0208 463 9683.
Replied by i-sells, 11-09-2015#3CompitibilityI would like to replace a MIXflo MF-100S fan and i was wondering if this unit is compatible as it looks slightly different. I would prefer not to have to replace the wall fittings.
Question by Paul, 05-10-2015Hello Paul,
This unit is a Manrose MF100S Mixed Flow Fan. I am not aware of any recent design changes to the Manrose MF100S that would make this unit different from one previously purchased. Can you confirm what it is that looks different between this unit and the one that you currently have in position?
With kind regards,
MichaelReplied by i-sells, 06-10-2015#4Hi, can this fan be installed in a ceiling void which is just deep enough to fit it. Thanks Alex
Question by Alex, 19-10-2015Hello Alex,
The technical datasheet for this product which shows the full dimensions of the product can be found here and the installation instructions can be found here.
I would recommend that you consider the space requirements not of just the unit but also the working space that you will require to actually fit the unit and the ducting.
Please do not hesitate to contact me if you have any further queries.
Michael Gallagher
michael.gallagher@i-sells.co.ukReplied by i-sells, 19-10-2015#6Condensation in FanHow do I prevent condensation collecting in the bottom of the fan housing which makes the fan blade sound as if it has come loose from the shaft, the unit is located in the loft space, has a shuttered external grill mounted 16 inches lower than the fan and the bathroom extract grill is 16 inches lower on the suction side and shows no signs of dripping condensate. the unit is a Manrose MF100S as the product illustrated
Question by P Curran, 06-12-2015Hello
Thank you for your question. We do a condensation trap product code QS290. This is fitted in a horizontal position.
Replied by i-sells, 07-12-2015#7Looking for the extractorHi, I'm looking for extractor hor my bathroom.Bathroom size is W-2.6m,L-2.9,H-2.7 the bathroom don't have a windows.I have installed a 125mm duct pipe wich is 1 meter long to outside wall.I'm looking for silent and with the timer extractor.Can you recommend wich one to buy.Thank you
Question by Mindaugas, 24-01-2016Hello Mindaugas
Thank you for your questions. There are two fans that will do you application.
Product codes. QS38794 & QS17114.
Replied by i-sells, 26-01-2016#8DuctingWhat is the maximum length of ducting this fan can handle?
Question by John Love, 28-01-2016Hello John
Thank you for your question. This fan can do an 8meter straight run or 6meters with two bends.
Replied by i-sells, 28-01-2016#9Combustion Air VentCan i use this product as a combustion air vent installed in my actual wood burning open fireplace?
Question by BRETT HESSE, 10-02-2016Hello Brett
Thank you for your question. Please see below Manrose's telephone number to give their technical department a call as they will be able to advise if you can use this fan for your application as the Maximum Operating Temperature is 40degree c.
01753 691399
Replied by i-sells, 11-02-2016#10MF100S inline extractorThis extractor model can be used with en-suite timer delay switch operation.
Question by Graham Kirby, 30-04-2016Hello Graham
Thank you for your question. This fan can be used with a delay switch as long as it has a 240v supply and does not exceed 200watts. Get your electrician to double check
Kind Regards
Anita
Replied by i-sells, 05-05-2016#11Suitable for small bathroom?My internal bathroom measures 2.0m x 1.7m x 2.4m. Would this fan be suitable for a small bathroom like this?
Question by Luke Bailey, 24-05-2016Hello Luke
Thank you for your question.Please could you advise how long your duct run would be as this fan does 8mtrs straight and 6mtrs with two bends incurred.
Kind Regards
Anita
Replied by i-sells, 24-05-2016#12Mounting angleCan I mount the fan at any angle between flat and vertical. Just to stop condensate collecting in the depression around the fan blades. A slight tilt 45 degrees would allow it to run out and down ducting. But I don't know how this tilt would effect the bearings and motor....
Question by Robert tober, 16-07-2016Hi Robert
The fan is able to be mounted vertically and horizontally so I cannot see a problem with mounting at a slight angle as long as its mounting is flat and running ducting to falls is always a good idea.Replied by i-sells, 18-07-2016#13Running timeHi, Is the MF100s designed to be used as a continuos 24 hour run fan? Thanks
Question by Serge, 15-11-2016Hello Serge
If wired up to the Manrose Met Controller, enter QS6285 in the Quick Search bar you have the option of continuous running at variable speeds as well as an off switch.I hope this helpsReplied by i-sells, 17-11-2016#14manrose inline fanswhat is the difference between MF100T &MF100S?
Question by terry, 07-03-2017Hi TerryThe MF100T is a dual speed fan constant running on trickle with an activated boost speed and overrun via an adjustable timer, there is no other control option.The MF100S is the basic model that IS compatible with the separate humidistat, PIR or speed control options.Replied by i-sells, 08-03-2017#15Dryer ventHi I've got a dryer where the run I believe is approx 2m and comes out of the roof with one bend. However, the dryer is not working at its optimal as the airflow to get the hot air up and out is poor. Would this duct fan help with ensuring the air quickly dissipates into the air outside?
Question by R koura, 20-03-2017HiIt is quite possible that the Manrose fan would be too powerful even on a low speed in that it would want to extract faster than the discharge from the dryer so you would need to check the flow rate from the dryer discharge.A smaller less powerful unit is the duct fan that can be found by typing QS12506 into the quick search bar and this may be more suited..Replied by i-sells, 20-03-2017#16manrose mixflofanis this fan ok to exctract steam from cooker verticaly
Question by kenneth jones, 04-04-2017Hello Kenneth
Thank you for your question. Yes this fan can be mounted vertically. If I can help any further please do not hesitate to contact me on 0208 463 9683
Kind Regards
Anita
Replied by i-sells, 04-04-2017#17PressureCould you please provide me with the fan flow curve for this product?
Question by Lee, 02-05-2017Hello Lee
Thank you for your question. The flow rates etc can be found on the PDF on our website for this product. If you have any problems please do not hesitate to contact me
Kind Regards
Anita
Replied by i-sells, 02-05-2017#18What fan do I need?The bathroom measures W 1.6m, L 3m, H 2.55m. We have a ceiling fan above the power shower. It doesn't at all cope with the steam produced even though it replaced a less powerful fan. The walls are 460 deep stone, should we core drill through rather than through a roof tile. What product would solve the problem?
Question by Lynne Thurston, 01-11-2019Good afternoon Lynne. Thanks for the question. Do you know what type of ducting you are using. If it's a PVC Flexi duct, then it may not be performing it's duties fully. Flexi ducting would need to be pulled tort to get maximum airflow, so if the duct is drooping, that will cause problems.
If you wanted to go for a through the wall type, then you may want to look at the Kair Smart Fan - CRE100HTP. This is a continuous running fan, with Smart Humidistat, that constantly monitors the background humidity and adjusts the fan speed accordingly. My final point ref to the inline fan, is, does it only come on when you turn the light switch on? Might be worth adding a Humidistat to it if you can. If you want to give me a call, i am here until 5.30 tonight, and my direct dial is 020 8463 9514Replied by i-sells, 01-11-2019#19Warranty claimHi. I bought this item in November 2017 under order ref 320892. Sadly the item has stopped working. Could you please advise how I make a warranty claim as I believe the item to still be under warranty? Many thanks
Question by Lee, 05-12-2019Hello Lee
Thank you for your inquiry. I will complete a return and replacement on our website. Please look out for an e-mail from us with your returns number and return address. Once we have the faulty fan back we will send your replacement. If you have any further questions please do not hesitate to contact meKind RegardsAnitaReplied by i-sells, 09-12-2019#20kitchen extract fanwhich fan would suit a8m duct run with 3 90 degree bends for kitchen canopy? thanks
Question by jim pierce, 08-01-2020Hello Jim
Thank you for your question. For me to advise you further please could you advise if is this a domestic or commercial installation?Kind RegardsAnitaReplied by i-sells, 08-01-2020#21type of fanhi Anita. the 8m run is domestic. thanks
Question by jim pierce, 08-01-2020Hello Jim
Thank you for your reply. The MF100s fan will do a 8m straight run with 2 bends within the run. If I can help any further please do not hesitate to contact meKind RegardsAnitaReplied by i-sells, 09-01-2020#22WarrantyHi, I purchased this item on 4th Sept' 2018 but it has developed a rattle (12 January 2020). I have investigated to find that the fan blade has a crack on it and this seems to be the problem. Can you advise if this is covered under 3 year warranty? I would be happy with a replacement blade which i could fit myself but i can't seem to see these available. Many thanks in advance.
Question by Graham, 13-01-2020Hi Graham, Yes it is covered under warranty, and I am fairly sure they can supply just the blade. If you can find the serial number off of the unit, and give me a call in the morning, i will get onto Manrose for you.
My DDi is 020 8463 9514.Kindest regards,Marc.Replied by i-sells, 14-01-2020#23Speed selection.Hi there. Before buying this fan, could you tell me if and how I can select a single speed (i.e. the fastest) to leave on all the time whilst it is switched on in my bathroom. I do not want a timer or 3 speeds just a one speed continuous fast speed fan. The fan will be mounted in the attic space above the bathroom with a short 1 metre flexi on the inlet side and a long 6 metre sloping solid pipe on the exit side to atmosphere. Thanks for your help.
Question by George, 22-02-2020Hello George
Thank you for your question.The MF100 fan unit is not made to be running on continuous, only intermittent, if left running it will burn out and invalidate your warrantyFor your requirements the Vectaire Elix range will do your application. It will do a 9mtr run and will run continuously at one or two lower speeds. If I can help any further please do not hesitate to contact meKind RegardsAnitaReplied by i-sells, 24-02-2020#25Alteration of fan speed.With the Manrose 1361 controller, doed the MF 100 S automatically change speed dependant on the humidity present, or does it have to be pre set and altered if necessary. Thank you, regards Reg.
Question by Reg, 06-02-2021Good morning Reg. Yes the speed will need to be set using the block connector on the fan itself.
Kindest regards,MarcReplied by i-sells, 08-02-2021#26fan extraction ratesplease cayou tell me extraction rate for the ManroseMF100s 100mmext fan
Question by peter coates, 18-11-2021Hello Peter
Thank you for your question . The flow rates for the MF100s fan are below. If you require any further help please do not hesitate to contact meHigh- 245m3/hr 68l/sMedium- 216m3/hr 60l/sLow- 180m3/hr 50l/sKind RegardsAnitaReplied by i-sells, 18-11-2021#27continuously runningCan this fan be left running 24/7 365?
Question by Mitch, 30-01-2022Good afternoon Mitch and good question.
The long and the short of it is, it isn't designed to do so. It is an intermittent fan, where it activates as an when required. If you want a fan that is designed to run continuously, then you would need to look at multivents. The Standard model would be MEVDC2, which has 1 x 125mm spigot from the unit to the wet zone, and 1 x 125mm spigot to the exterior grill. These can run on a constant trickle speed, and boost via a switch like.Kind regards,Marc.Replied by i-sells, 31-01-2022 -
DELIVERY
Delivery: You'll receive in: Cost Min Order Free Delivery 3 to 5 Days FREE £100 Standard 2 to 4 Days £4.99 - Express Courier Next day+ £9.95 Any View Full Delivery Info
FREE Delivery for orders over £100 inc VAT.
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.
You may also like
-
List Price: £193.60
Only: £70.84 -
-
-
-
-
