Aventa AV100T - 100mm In-Line Mixed Flow Fan With Timer (9041086)
-
DETAILS
Aventa AV100T 100mm – Mixed flow in-line fan 2 speed with timer
Quiet and powerful, high performance up to 187 m3/hr. Two-speed operation with basic and timer models. Ductable up to 6m and supplied with a mounting bracket.
Aventa 100mm in-line mixed flow fans are available in high-performance two-speed versions. They are less bulky than large in-line centrifugal fans and can be installed in loft spaces or service shafts. This range is specially designed for residential applications requiring remote extraction. It is also supplied with a mounting bracket for quick and easy installation on wooden joists and panels. The inlet/outlets are compatible with flexible and rigid pipe runs up to 3m either side of the fan (6m). The units operate manually from an (optional) three-position switch (off/low/high) or with adjustable timer version (1 to 20 minutes)
Application
Aventa 100mm fans are suitable for removing damp moist air, odours and airborne pollutants from bathrooms, en-suites, shower rooms, utilities, kitchen and other internal living spaces without windows or natural ventilation.Main Features:
- Quiet and powerful mixed flow fan for use with up to 6m ducting
- 2-speed operation with basic switching or adjustable timer models
- High performance up to 187 m3/hr
- Remote mounting in lofts and cupboards
- Double-up Option - Install two fans in series – double the pressure. Two fans in parallel – double the flow (Two units required)
- Thermally protected motor
- Maximum working temperature: 45 degrees C
- Complies with the latest Building Regulations ADF 2006
- Mounting bracket supplied with a range of optional ventilation accessories
- 3 Year "no quibble" guarantee
- Quality assured to ISO9001
-
FEATURES
Features
- High performance up to 187 m3/hr
- Remote mounting in lofts and cupboards
- 3 Year manufacturers guarantee
- Complies with the latest Building Regulations ADF 2006
- Quiet and powerful mixed flow fan for use with up to 6m ducting
-
TECHNICAL
Technical Specifications
Timer Yes Product Category In-Line Fans Round System (mm) 100 Product Type Mixed Flow In-Line Fan Product Group Ventilation Fan Spigot size (mm) 96 IP Rating IPX4 Power Min (Watts) 21 Power Max (Watts) 33 Decibel Rating (dB) - Low 27 Decibel Rating (dB) - Max 36 Colour White Weight (Kg) 1.5 Packaged Weight (Kg) 1.707 Packaged Length (mm) 175 Packaged Width (mm) 211 Packaged Height (mm) 255 Barcode 5019009305455 Manufacturer Product Code 9041086 Airflow Performance (l/s) - Low 40 Airflow Performance (l/s) - High 52 Airflow Performance (m³/h) - Low 145 Airflow Performance (m³/h) - High 187 Warranty (Years) 3 Quick Search: QS18902 -
REVIEWS
-
Robert HeathDate Added: Monday 14 May, 2018
was not sure what to expect when I ordered this fan. Why did I worry the fan arrived before the stated time for delivery and the customer is that satisfied he's told his friends. clears the bathroom fast with only the minimum 2min over run time. Will be using again. -
Deborah GillmanDate Added: Wednesday 13 April, 2016
Great Thanks. Quick delivery , good product -
John HickmanDate Added: Saturday 10 October, 2015
Fitted and wirked. Arrived as expected. On the product some indication of comparative strength would have been good. Are you aware the share opportunities completely cover the text you are typing.? Biggest pain experienced here is giving the feedback!
-
-
Q & A
Product Questions
Questions and Answers, do you need more information about this product?
Ask a QuestionYour question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
#1bathroom extractorOur bathroom is 4 foot by 9 foot by 8 foot heigh we have a big problem with condensation after showering we were going to by this extractor fan will this be sufficient or would we be better with the 6 inch ducting.?
Question by Michelle, 17-04-2016Hello Michelle.
Thank you for your question. Please could you advise me of your duct run from the bathroom to the outside. As this fan only does up to 3m either side of the fan.
My telephone number is 0208 463 9683
Kind Regards
Anita
Replied by i-sells, 18-04-2016#2Wiring via light switchFrom the wiring diagram it doesn't seem clear that this fan can be wired in with the bathroom light switch so that the fan will run on the timer after the light is switched off.
Question by Ian Gibson, 05-09-2016Hi IanIf you expand the page for the 'T' model and open the pdf for the 'Users manual', fig 3 has the wiring diagram options for the 'T' model.The LT code is the connection to the constant feed (light switch).RegardsIanReplied by i-sells, 06-09-2016#3bathroom fanAt present I do not have a light switch, lights come on when you entre because of ceiling sensor.Is there any thing I can use whitch works with a sensor.
Question by trevor butt, 03-03-2017Hello TrevorI think the Manrose in-line fan has several operation options, enter the codes below into the search bar at the top of the page:-Fan - QS9653Humidistat / Timer - QS5409On/Off and speed control - QS6285PIR Sensor - QS5410I hope this helpsReplied by i-sells, 03-03-2017#4min.space required for fanPlease supply o/all dimensions of fan. Would like to fit fan in airbrick space.
Question by Ronald Thomas, 22-03-2017Hello Ronald
Thank you for your question. The dimensions of the fan can be found on our website on the PDF for the fan. I will send you these dimensions on a separate e-mailKind RegardsAnitaReplied by i-sells, 22-03-2017#5Two speed operationproduct information informs that this motor is operated for two speed operation --- switch not supplied. Not understanding exactly what this means ... can it be set to run at normal speed without the switch ?
Question by colin porrett, 16-01-2018Hello Colin
The fan is operated by the bathroom light switch and there are two speed setting options (high and low), the speed setting is made during installation and is just a case of which contact is used when wiring up.Replied by i-sells, 17-01-2018#6Aventa AV100THi I have read the questions below but would like some further information regarding wiring of the fan. I see you refer to Fig 3 to enable wiring direct from a light switch (Ceiling mounted) and you say the circuit will allow operation of the fan after the light is turned off. How is this achieved when the light is switched off and the power removed?I have looked at the diagram. I am seeking to replace an existing fan (failed device) and it operates from an existing switch. I had anticipated a three wire plus earth circuit. Thanks
Question by David, 26-07-2018Hello David
We are not electricians but as we understand it the lighting circuit is a constant feed when you turn the light off you are only stopping the power to the light.Replied by i-sells, 27-07-2018 -
DELIVERY
Delivery: You'll receive in: Cost Min Order Free Delivery 3 to 5 Days FREE £100 Standard 2 to 4 Days £4.99 - Express Courier Next day+ £9.95 Any View Full Delivery Info
FREE Delivery for orders over £100 inc VAT.
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.