Kair Smart Fan Plus - 100mm Intelligent Extractor Fan with Humidistat Timer & Data Logger
-
DETAILS
Kair Smart 100mm Filterless Extractor Fan with Humidistat Timer and Data Logger
Compact and aesthetically pleasing, this continuously running extractor fan has inbuilt energy and noise reduction technologies to limit cost and noise disturbance, all whilst continuously removing stale, moist old air from the property.
A humidity sensor intelligently reacts to a sudden increase in air moisture levels, temporarily boosting the fan to extract at a faster rate. This reduces the humidity levels in your home and prevents condensation and mould formation.
The unit is filterless as an extractor fan has no need to filter air being taken out of the property. As a result, this fan has the advantage of requiring no filter replacements, so there is less maintenance and the unit again saves you money, time and hassle.
The Kair Smart extractor fan has been created for the convenience of both homeowners and landlords alike. A busy household and an apartment full of tenants can function in much the same way, people cooking and showering at different times of the day creates a lot of condensation.
This powerful but quiet extractor fan will effortlessly handle even the busiest of properties.
What can it do?
The Kair Smart extractor fan intelligently reacts to a sudden increase in moisture and enables its “boost” function to extract at a much higher rate until the sensors detect the moisture levels have decreased a sufficient amount. This alleviates any concern over high humidity levels within the property, creating a far more pleasant living environment for families and tenants.
Should you feel that the humidity level in your property is too high, or you wish to clear out scents from the cooker or bathroom, you have the option of a pull cord or remote switch (depending on the install option you chose), giving you complete control and comfort.
You also have the ability to set the timer function for the fan, allowing you to decide how long the fan stays in “boost” mode for, after a shower for example. This can be connected to the light switch to enable the fan to run whilst someone is using the bathroom, and for a predetermined length of time after the light switch is turned off.
- Quiet and aesthetically pleasing.
- Humidistat, Timer & Data Logger.
- Daily run monitor - Records overall usage time of fan.
- Ceiling, window or wall mounting available with additional components.
- Cost-effective due to low installation and maintenance costs, and energy-saving technology.
- Compliance – Building Regulations ADF & L (2021 edition) – to protect the health of your occupants
Help prevent damp and mould growth
You can rest assured that this extractor fan has been tested under the strictest scenarios and is powerful and reliable enough to deal with even the busiest homes.
The Kair Smart Fan
Smart sensors continuously monitor the environment, only boosting the fans extraction when necessary, reducing energy costs and eliminating condensation as soon as it develops!
The Smart fan has been specifically designed to cope with each type of environment it is placed into. The very low running costs and minimal maintenance make this the ideal fan for any busy property, or people looking for a simple, effective condensation solution that requires little to no monitoring.
Suitable for any room!
Bathroom / Toilet Extraction Fan
The fan will automatically reduce the humidity levels in your bathroom or toilet and clear out unpleasant smells.
Set a longer Timer or use the Boost Function to extract at a much higher rate when needed.
The aesthetically pleasing design will seamlessly blend into the décor of your bathroom.
Living Room Extract Fan
Special consideration has been paid to reduce the noise levels of the Kair Smart fan, with 33dB being it’s maximum whilst on boost mode.
This is comparative to the ambient noise of a library!
Trickle Mode setting will not interfere when watching your favourite movie or TV show!
Kitchen Extraction Fan
There is an abundance of warm and moist air while cooking, this creates the perfect situation for mould to develop.
The smells coming from the cooker that might be disagreeable to some of your family members.
The Smart fan has been specifically designed to cope with each type of environment it is placed into
Work Room Extraction Fan
The fan can operate in Trickle Mode at whisper-quiet sound levels.
The main benefit of Trickle Mode is that it is always removing stale old air from any room.
Technical Information
Specification
- 33dB at max speed
- IPX4 Rated
- Up to 5-metre duct run
- Trickle speed selectable: 0 to 20 l/s (5 default)
- Comfort Boost (Automatic) speed selectable: 6 to 29 l/s (13 default)
- Humidistat threshold: Off / 65% to 95% (Auto default)
- Boost (Manual): speed selectable: 8 to 29 l/s (25 default)
- Option to Manual Boost through a Switch Live (SL) connection or pull cord.
- Run-On Timer selectable: Off to 25 minutes (Auto default)
- Watts: Maximum 7W. (Depending on setting)
Trickle Mode allows the fan to remove stale old air from your home with minimal energy consumption, so there is no fear of large bills as a result.
The boost function only kicks in when required, quickly eliminating excess moisture, reducing the time the unit needs to be working, thereby saving energy.
Humidistat, Pullcord, Timer, Night Time Delay and Constant Flow Sensor
Constant flow sensor – Sensors continuously monitor the environment, only boosting the fans extraction when necessary, reducing energy costs and eliminating condensation as soon as it develops.
The Kair Smart fan can be ceiling, wall or window mounted.
Window Mounted
A window kit (available separately) makes for a simple speedy installation through any window in your property, allowing the option to still have an extractor fan when cutting through walls is not an option.
Ceiling Mounted
For ceiling or wall mounting, a 100mm (4inch) hole is either cut through the wall to the exterior of your property or through the ceiling into the loft cavity.
Wall Mounted
The fan can then be ducted straight through to the exterior or loft cavity with a simple external grille for more pleasing aesthetics.
Why Choose the Kair Smart Fan?
Very few extractor fans on the market can be described as “Smart”. The Kair Smart fan differs, it intelligently reacts to its environment, working almost autonomously because of its multiple sensors and the advanced technology associated with them.
Common activities increase the amount of moisture within a home, from washing machines, cooking or having a shower or bath.
It can also vary at any point through the day within a busy home or social housing situation due to peoples differing schedules and hygiene habits. This creates the perfect situation for mould to develop, as there is an abundance of warm and moist air in the property. There are also smells coming from the cooker that might be disagreeable to some of your family members or tenants.
- Ceiling, window or wall mounted extractor fan to suit any installation type (window kits available).
- Timers reduce nighttime activity - Prevents night-time noise and saves energy
- Humidistat measures moisture, only boosting the fan when required, saving energy
- Cost-effective due to low installation and maintenance costs, and energy-saving technology.
- Quiet and aesthetically pleasing
Please note, in order for the fan unit to function, the faceplate MUST be connected to the unit, this is a built-in safety feature.
-
FEATURES
Features
- Kair smart extract fan with humidistat, pullcord, timer, night time delay, daily run monitor, and constant flow sensor
- Daily run monitor – records tenant operation
- Wall, ceiling and window mountable - fits every application (Ancillaries Required)
- Compliance – Building Regulations ADF & L (2021 edition) - to protect the health of your occupants
- 5 year manufacturer warranty for peace of mind
-
TECHNICAL
Technical Specifications
Timer Yes PIR No Humidistat Yes Pullcord Yes Continuous Running Yes Smart Control Yes Product Category Extractor Fan Round System (mm) 100 Product Type Axial Fan Product Group Ventilation Fan Product Variety Smart Fan Plus Length (mm) 164 Width (mm) 46 Height (mm) 164 Voltage (V) 240 IP Rating IPX4 Power Min (Watts) 1.4 Power Max (Watts) 7 Decibel Rating (dB) - Max 33 Colour White Colour - Internal White Colour - External White Material ABS Plastic Weight (Kg) 0.823 Packaged Weight (Kg) 0.823 Packaged Length (mm) 190 Packaged Width (mm) 200 Packaged Height (mm) 190 Pallet quantity 384 Economy Delivery Not Eligible Barcode 5060272547974 Barcode - Type EAN Manufacturer Product Code CRE100HTPPLUS Airflow Performance (l/s) - Low 0 Airflow Performance (l/s) - Med 20 Airflow Performance (l/s) - High 29 Airflow Performance (m³/h) - Low 0 Airflow Performance (m³/h) - Med 72 Airflow Performance (m³/h) - High 104.4 Maximum suggested long duct run (Mtr) 5 Warranty (Years) 5 Quick Search: QS53935 -
REVIEWS
-
Q & A
Product Questions
Questions and Answers, do you need more information about this product?
Ask a QuestionYour question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
-
DELIVERY
Delivery: You'll receive in: Cost Min Order Free Delivery 3 to 5 Days FREE £100 Standard 2 to 4 Days £4.99 - Express Courier Next day+ £9.95 Any View Full Delivery Info
FREE Delivery for orders over £100 inc VAT.
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.