Kair 90 Degree Horizontal Elbow Bend 220mm x 90mm - 9 x 4 inch
-
DETAILS
KAIR SYSTEM 220 RECTANGULAR - 220MM x 90MM - 90 DEGREE HORIZONTAL BEND
Product Summary:
This horizontal 90 degree elbow bend can be used to run your ductwork around obstacles, along walls and into ceilings and offers superior performance and durability over flexible alternatives.
Both sides are female sockets. The ends will fit over Kair System 220 (220mm x 90mm) flat ducting pipe (Part: "DUCVKC5704").Kair System 220 (SYS-220) ducting has comparable airflow performance to 150mm Round Duct. Is designed to be low profile to fit inside ceilings, floor slabs, or to be concealed above kitchen wall units. It is best utilised as part of a ducting system for high powered cooker hood extractors and whole house ventilation systems, such as heat recovery systems or mechanical ventilation systems in offices, houses, and apartments.
- Made in the UK using strong high-quality white polystyrene/polypropylene material.
- Max / Min Temperature: +60c / -15c.
- Easy to install and durable, just push-fit duct and fittings together.
- For permanent fixings, seal joints with silicone sealant, solvent cement or tape.
- Kair plastic rigid duct provides superior airflow performance and durability versus flexible duct.
- Suitable to use in compliance with Part F Building Regulations.
- Airflow performance independently tested by BSRIA or BRE.
- Static Pressure Drop in Pascals:
- 60 l/s = 7.3 Pa
- 120 l/s = 29.5 Pa
- 180 l/s = 66.6 Pa.
Installation Tips:
- Kair plastic ducting pipe is lightweight & easy to install. You simply push-fit the duct pipe and fittings together. For permanent fixings, you can seal the joints with a method of your choice (Popular options include silicone sealant, solvent cement or tape).
- Rectangular plastic ducting can be carefully cut to the required size using a hacksaw. Offcuts are always useful to keep to hand for joining two female fittings together.
- If your duct run passes through a particularly cold area, we would recommend considering using our pre-insulated ducting to avoid condensation building up within your ductwork. Click here to view our range of pre-insulated plastic ducting.
Alternative Products:
Looking for Compatible Fittings?
Compatible with the extensive Kair System 220 range of pipes, fittings, outlets, and grilles.
Click here to view the full range of Kair 220mm x 90mm Rectangular Ducting Products.
Common Applications:
The Kair range of plastic ducting is commonly used for the following applications:
- Bathroom Extractor Fan Ducting
- Kitchen Extractor Fan Ducting
- Cooker Hood Ducting
- Heat Recovery Unit Ducting
- Air Conditioning Ducting
- HVAC Ducting
- Tumble Dryer Ducting
- Hydroponics Ventilation Ducting
- Whole House Ventilation Ducting
- Positive Input Ventilation System Ducting
-
FEATURES
Features
- Horizontal 90 degree ducting bend
- Offers superior durability and airflow performance vs using flexible hose
- Easy to install and durable, just push-fit duct and fittings together
- Airflow performance independently tested by BSRIA or BRE
- Max / Min Temperature: +60c / -15c
-
TECHNICAL
Technical Specifications
Product Category Bends Flat System (mm) 220x90 Product Type Bend Product Group Plastic Ducting Product Variety 90 Degree Horizontal Weight (Kg) 0.387 Packaged Weight (Kg) 0.387 Packaged Length (mm) 260 Packaged Width (mm) 92 Packaged Height (mm) 260 Temp Max (°C) 60 Temp Min (°C) -15 Barcode 5060272546601 Quick Search: QS18938 -
REVIEWS
-
Deryck GreenDate Added: Tuesday 11 April, 2017
I wanted just a 220x90 Horizontal 90deg Bend to update some existing ducting. The item I got from i-sells was perfect. It was also a good price and promptly delivered. A further good point was that the delivery charge was sensible for a single item.
-
-
Q & A
Product Questions
Questions and Answers, do you need more information about this product?
Ask a QuestionYour question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
#1does this fit Neff ducting kitI have a neff ducting kit z861KE1 will this range fit ?
Question by Stephen Faithfull, 18-04-2023Good morning Stephen.
If you ducting kit comes with 220x90 ducting, then yes, this should attach to the ducting. Just check that the outside diameter of your ducting marries up with the dimension of the I/D of this component, as shown on our website in the gallery.Kind regards,MarcReplied by i-sells, 19-04-2023#2InvoiceHi, I cant seem to download this invoice
Question by Lee, 27-06-2023Hi Lee
Thank you for your enquiry. I will resendKind RegardsAnitaReplied by i-sells, 27-06-2023 -
DELIVERY
Delivery: You'll receive in: Cost Min Order Free Delivery 3 to 5 Days FREE £100 Standard 2 to 4 Days £4.99 - Express Courier Next day+ £9.95 Any View Full Delivery Info
FREE Delivery for orders over £100 inc VAT.
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.