-
DETAILS
KAIR 100MM ROUND 90 DEGREE BEND
Product Details:
White Plastic 90 Degree Elbow Bend - Outer Diameter 99mm - Male Spigot will fit inside Kair 100mm Round Pipe (Part: "DUCVKC250") or 102mm Flexible Hose (Part: "DUCP0092/102/35").
90-degree bends can be used to run your ductwork around obstacles along walls and into ceilings and offers superior performance and durability over flexible alternatives. Total space requirement: 136x136x103mm.
Kair plastic ducting is lightweight, durable and suitable for commercial and domestic use. It is perfectly suited for ducting your tumble dryer, bathroom or kitchen extractor fan, hydroponics, in-line extract fans, or a cooker hood. It can be used as a part of a long ductwork run for a variety of purposes including whole-house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems.
- Easy to install and durable, just push-fit duct and fittings together.
- For permanent fixings, seal joints with a method of your choice (Popular options include silicone sealant, solvent cement, or tape.).
- Will join any female part of the Kair System 100 range.
- Built to last out of high-quality white Polystyrene/Polypropylene plastic Material.
- Max / Min Temperature: +60c / -15c.
- Round rigid ducting provides superior airflow performance vs. comparative size rectangular or flexible duct.
- Suitable to use in compliance with Part F Building Regulations.
- Airflow performance independently tested by BSRIA or BRE.
- Static Pressure Drop in Pascals: 15 l/s = 5.60 Pa - 30 l/s = 21.10 Pa - 60 l/s = 33.10 Pa.
Recommended usage
We always recommend to use as few bends as possible in your duct run to reduce any loss of pressure, this also applies when connecting smaller to larger ducting.
When supplying air through a powerful fan, ensure that the ducting is not too narrow as this could lead to an increase of air noise, damage to the fan and potential vibration.
Through the use of adapters, multiple connections to all other systems are possible.
Our system 100 is commonly used in bathrooms or to branch out from larger systems to smaller rooms.
Alternative Materials:
Here at i-sells.co.uk, we stock a large range of galvanised products including 90 degree and 45-degree bends. We recommend our ';safe seal'; galvanised bends, which are available in a huge variety of sizes from 63mm up to 1600mm.
Click here to view our full range of galvanised safe-seal bends.If your duct run passes through a particularly cold area, we would recommend considering using our pre-insulated ducting to avoid condensation building up within your ductwork. Click here to view our range of pre-insulated plastic ducting.
Looking for compatible products?
Compatible with the extensive Kair SYS-100 range of fittings, outlets, and grilles.
Click here to view the full range of Kair 100mm Round / 110mm x 54mm Rectangular Ducting Products.
All of our Kair products have a full 30-day money-back guarantee. We have seen on many occasions contractors on-site that have run out of the components they need to finish the job. They then purchase items in bulk from us to finish the project on schedule. You can rest assured that if you find yourself in this situation, you can return the items that were surplus to requirement for a full refund. This would be after a quality inspection of the product has been made by our goods returned department.
-
FEATURES
Features
- APPLICATION: The rigid 90-degree bend offers superior airflow performance to flexible ducting.
- EASE OF USE: The system 100mm round ducting fittings have a male spigot and female pipe, ensuring a solid connection.
- COMPATIBILITY: The System 100 round pipe will easily connect to any round fan with 100mm spigot.
- AIRFLOW: When using long duct runs, ensure that your fan has the appropriate power to exert the required force.
- ACCESSORIES: Our 90-degree bend will push fit to a 100mm round pipe or flexible hose when used with a hose clip or tape.
-
TECHNICAL
Technical Specifications
Product Category Bends Round System (mm) 100 Product Type Bend Product Group Plastic Ducting Length (mm) 130 Width (mm) 100 Height (mm) 130 Spigot size (mm) 99 Colour White Material Polystyrene Weight (Kg) 0.076 Packaged Weight (Kg) 0.076 Packaged Length (mm) 130 Packaged Width (mm) 100 Packaged Height (mm) 130 Temp Max (°C) 60 Temp Min (°C) -15 Barcode 5060272541187 Vent Axia (similar) 372004 Manrose (similar) 44900 Polypipe / Domus (similar) 490 Pressure Loss (Pa) 15 l/s 5.6 Pressure Loss (Pa) 30 l/s 21.1 Pressure Loss (Pa) 60 l/s 80.1 Quick Search: QS250 -
REVIEWS
-
Sharon GilfordDate Added: Saturday 09 April, 2022
Excellent Service and product - thanks 👍 -
Barry BlakeDate Added: Friday 01 May, 2020
Good prouct -
Valerie MitchellDate Added: Monday 07 May, 2018
Easy to find online, and prompt delivery, thank you -
Robert VinesDate Added: Tuesday 17 April, 2018
very satisfied product and service! -
David Moon MoonDate Added: Monday 22 January, 2018
good for the job -
Robert DawsonDate Added: Thursday 16 February, 2017
This was an integral part of a planned installation and fitted perfectly. The order was made and delivered with no fuss and saved lots against warehouse prices. -
Alan BowditchDate Added: Friday 02 December, 2016
Just the job -
David BurtonDate Added: Thursday 28 July, 2016
Exactly as described. Perfect fit with the 100dia rigid ductwork I purchased with this product. -
Paul HodgsonDate Added: Saturday 16 April, 2016
all as described very prompt thanks -
Frank MorrisonDate Added: Monday 29 February, 2016
This item did the job fine and saved kinking the flexible vent hose.
-
-
Q & A
Product Questions
Questions and Answers, do you need more information about this product?
Ask a QuestionYour question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
#1DuctingHi Can I connect 150 mm Semi Rijid Aluminium Ducting to 150 mm Round 90 Degree Bend also can I connect a 150 Round 90 Degree Bend to 150 mm Round Plastic Ducting
Question by STUART ROBINSON, 18-01-2016Hello Stuart
Thank you for your question. Yes you can fit the semi rigid ducting to the bend and use a quick release worm clip to secure the bend to the ducting and the bend will fit into the plastic duct just seal the joint with some duct tape.
Replied by i-sells, 21-01-2016 -
DELIVERY
Delivery: You'll receive in: Cost Min Order Free Delivery 3 to 5 Days FREE £100 Standard 2 to 4 Days £4.99 - Express Courier Next day+ £9.95 Any View Full Delivery Info
FREE Delivery for orders over £100 inc VAT.
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.