Kair 45 Degree Horizontal Elbow Bend 204mm x 60mm - 8 x 2 inch
-
DETAILS
KAIR SYSTEM 204 RECTANGULAR - 204MM x 60MM - 45 DEGREE HORIZONTAL BEND
Product Details:
This horizontal 45-degree elbow bend can be used to run your ductwork around obstacles, along walls and into ceilings and offers superior performance and durability over flexible alternatives.
Both sides are female sockets. The ends will fit over Kair System 204 (204mm x 60mm) flat ducting pipe (Part: "DUCVKC5604").
Kair System 204 (SYS-204) 204mm x 60mm Rectangular Ducting is one of our most popular ranges. The low-profile dimensions of the duct and fittings allow it to be easily concealed where space is restricted. It offers high airflow performance, making this system perfect for both whole-house systems and single extract requirements such as Bathroom, Kitchen, and Utility Room extract systems.- Made in the UK using strong high-quality white polystyrene/polypropylene material.
- Max / Min Temperature: +60c / -15c.
- Easy to install and durable, just push-fit duct and fittings together.
- For permanent fixings, seal joints with silicone sealant, solvent cement, or tape.
- Kair plastic rigid duct provides superior airflow performance and durability versus flexible duct.
- Suitable to use in compliance with Part F Building Regulations.
- Airflow performance independently tested by BSRIA or BRE.
- Static Pressure Drop in Pascals:
- 15 l/s = 0.55 Pa
- 30 l/s = 2.71 Pa
- 60 l/s = 13.22 Pa.
Installation Tips:
- Kair plastic ducting pipe is lightweight & easy to install. You simply push-fit the duct pipe and fittings together. For permanent fixings, you can seal the joints with a method of your choice (Popular options include silicone sealant, solvent cement, or tape).
- Rectangular plastic ducting can be carefully cut to the required size using a hacksaw. Offcuts are always useful to keep to hand for joining two female fittings together.
- If your duct run passes through a particularly cold area, we would recommend considering using our pre-insulated ducting to avoid condensation building up within your ductwork. Click here to view our range of pre-insulated plastic ducting.
Alternative Products:
Looking for Compatible Fittings?
Compatible with the extensive Kair System 204 range of pipes, fittings, outlets, and grilles.
Click here to view the full range of Kair 204mm x 60mm Rectangular Ducting Products.
Common Applications:
The Kair range of plastic ducting is commonly used for the following applications:
- Bathroom Extractor Fan Ducting
- Kitchen Extractor Fan Ducting
- Cooker Hood Ducting
- Heat Recovery Unit Ducting
- Air Conditioning Ducting
- HVAC Ducting
- Tumble Dryer Ducting
- Hydroponics Ventilation Ducting
- Whole House Ventilation Ducting
- Positive Input Ventilation System Ducting
-
FEATURES
Features
- KAIR SYSTEM 204 WHITE PLASTIC RECTANGULAR HORIZONTAL 45 DEGREE ELBOW BEND - Both ends are female spigots which will fit over Kair 204mm x 60mm rectangular flat ducting pipe (Part: DUCVKC5604). SEE ALL IMAGES FOR MORE INFO
- EASY TO INSTALL, JUST PUSH-FIT TOGETHER. Kair plastic ducting is durable and suitable for commercial and domestic use. It is perfectly suited for ducting your Tumble Dryer, Bathroom or Kitchen extractor fan, Hydroponics, In-Line Extract Fans, or Cooker Hood. This bend can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and Heat Recovery Systems.
- KAIR SYSTEM 204 (SYS-204) 204MM X 60MM RECTANGULAR DUCTING IS ONE OF OUR MOST POPULAR RANGES. The low-profile dimensions of the duct and fittings allows it to be easily concealed where space is restricted. It offers high airflow performance, making this system perfect for both whole house systems and single extract requirements such as Bathroom, Kitchen, and Utility Room extract systems. Made in the UK using strong high-quality white polystyrene/polypropylene material. Max / Min Temperature: +60
- KAIR PLASTIC RIGID DUCT PROVIDES SUPERIOR AIRFLOW PERFORMANCE and durability versus flexible duct. Suitable to use in compliance with Part F Building Regulations. Airflow performance independently tested by BSRIA or BRE. Static Pressure Drop in Pascals: 15 l/s = 0.55 Pa - 30 l/s = 2.71 Pa - 60 l/s = 13.22 Pa.
- GENUINE KAIR PRODUCT & COVERED BY THE KAIR 100% SATISFACTION GUARANTEE for your peace of mind. Made in the UK. Compatible with the extensive Kair SYS-204 range of fittings, outlets, and grilles. Search
-
TECHNICAL
Technical Specifications
Product Category Bends Flat System (mm) 204x60 Product Type Bend Product Group Plastic Ducting Product Variety 45 Degree Horizontal Length (mm) 244 Width (mm) 219 Height (mm) 65 Socket size (mm) 204 Colour White Material Polystyrene Weight (Kg) 0.2 Packaged Weight (Kg) 0.201 Packaged Length (mm) 235 Packaged Width (mm) 65 Packaged Height (mm) 210 Temp Max (°C) 60 Temp Min (°C) -15 Barcode 5060272542474 Manrose (similar) 55810 Polypipe / Domus (similar) 555 Pressure Loss (Pa) 15 l/s 0.55 Pressure Loss (Pa) 30 l/s 2.71 Pressure Loss (Pa) 60 l/s 13.22 Quick Search: QS311 -
REVIEWS
-
Alan BowerDate Added: Monday 15 May, 2017
Product as specified. Good service and delivery
-
-
Q & A
Product Questions
Questions and Answers, do you need more information about this product?
Ask a QuestionYour question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
-
DELIVERY
Delivery: You'll receive in: Cost Min Order Free Delivery 3 to 5 Days FREE £100 Standard 2 to 4 Days £4.99 - Express Courier Next day+ £9.95 Any View Full Delivery Info
FREE Delivery for orders over £100 inc VAT.
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.